The hidecallerid setting in chan_dahdi.conf currently
is broken for a couple reasons.
First, the actual code in sig_analog to "allow" or "block"
Caller ID depending on this setting improperly used
ast_set_callerid instead of updating the presentation.
This issue was mostly fixed in ASTERISK_29991, and that
fix is carried forward to this code as well.
Secondly, the hidecallerid setting is set on the DAHDI
pvt but not carried forward to the analog pvt properly.
This is because the chan_dahdi config loading code improperly
set permhidecallerid to permhidecallerid from the config file,
even though hidecallerid is what is actually set from the config
file. (This is done correctly for call waiting, a few lines above.)
This is fixed to read the proper value.
Thirdly, in sig_analog, hidecallerid is set to permhidecallerid
only on hangup. This can lead to potential security vulnerabilities
as an allowed Caller ID from an initial call can "leak" into subsequent
calls if no hangup occurs between them. This is fixed by setting
hidecallerid to permcallerid when calls begin, rather than when they end.
This also means we don't need to also set hidecallerid in chan_dahdi.c
when copying from the config, as we would have to otherwise.
Fourthly, sig_analog currently only allows dialing *67 or *82 if
that would actually toggle the presentation. A comment is added
clarifying that this behavior is okay.
Finally, a couple log messages are updated to be more accurate.
Resolves: #100
ASTERISK-30349 #close
Commit 09e989f972
categorized the T option as not being compatible
with remote consoles, but they do affect verbose
messages with remote console. This fixes this.
Resolves: #102
This enables the test to work with CC=clang.
Without this the test for 6 args would fail with:
utils.c:99:12: error: static declaration of 'gethostbyname_r' follows non-static declaration
static int gethostbyname_r (const char *name, struct hostent *ret, char *buf,
^
/usr/include/netdb.h:177:12: note: previous declaration is here
extern int gethostbyname_r (const char *__restrict __name,
^
Fixing the expected return type to int sorts this out.
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
If processing an XInclude results in new <xi:include> elements, we
need to run XInclude processing again. This continues until no
replacement occurs or an error is encountered.
There is a separate issue with dynamic strings (ast_str) that will be
addressed separately.
Resolves: #65
We should also return all codecs on an re-INVITE without SDP for a
call that used late offer (e.g. no SDP in the initial INVITE, SDP
in the ACK). Bugfix for feature introduced in ASTERISK-30193
(https://issues.asterisk.org/jira/browse/ASTERISK-30193)
Migration from previous gerrit change that was not merged.
The current AST_CEL_LOCAL_OPTIMIZE event is and has been
triggered on a local optimization end to serve as a flag
indicating the event occurred. This change adds a second
AST_CEL_LOCAL_OPTIMIZE_BEGIN event for further detail.
Resolves: #52
UpgradeNote: The existing AST_CEL_LOCAL_OPTIMIZE can continue
to be used as-is and the AST_CEL_LOCAL_OPTIMIZE_BEGIN event
can be ignored if desired.
UserNote: The new AST_CEL_LOCAL_OPTIMIZE_BEGIN can be used
by itself or in conert with the existing
AST_CEL_LOCAL_OPTIMIZE to book-end local channel optimizaion.
* Remove .gitreview and switch to pulling the main asterisk branch
version from configure.ac instead.
* Replace references to JIRA with GitHub.
* Other minor cleanup found along the way.
Resolves: #39
When using mediasec, requests sent after a 401 must still contain the
Security-Client header according to
draft-dawes-sipcore-mediasec-parameter.
Resolves: #48
Currently, both pulse and tone dialing are always enabled
on all FXS lines, with no way of disabling one or the other.
In some circumstances, it is desirable or necessary to
disable one of these, and this behavior can be problematic.
A new "dialmode" option is added which allows setting the
methods to support on a per channel basis for FXS (FXO
signalled lines). The four options are "both", "pulse",
"dtmf"/"tone", and "none".
Additionally, integration with the CHANNEL function is
added so that this setting can be updated for a channel
during a call.
Resolves: #35
ASTERISK-29992
UserNote: A "dialmode" option has been added which allows
specifying, on a per-channel basis, what methods of
subscriber dialing (pulse and/or tone) are permitted.
Additionally, this can be changed on a channel
at any point during a call using the CHANNEL
function.
The current STIR/SHAKEN signing process is inconsistent with the
RFCs in a couple ways that can cause interoperability issues.
RFC8225 specifies that the keys must be ordered lexicographically, but
currently the fields are simply ordered according to the order
in which they were added to the JSON object, which is not
compliant with the RFC and can cause issues with some carriers.
To fix this, we now leverage libjansson's ability to dump a JSON
object sorted by key value, yielding the correct field ordering.
Additionally, telephone numbers must have any leading + prefix removed
and must not contain characters outside of 0-9, *, and # in order
to comply with the RFCs. Numbers are now properly formatted as such.
ASTERISK-30407 #close
Change-Id: Iab76d39447c4b8cf133de85657dba02fda07f9a2
Adds PJSIP as a supported technology to DUNDi.
To facilitate this, we now allow an endpoint to be specified
for outgoing PJSIP calls. We also allow users to force a specific
channel technology for outgoing SIP-protocol calls.
ASTERISK-28109 #close
ASTERISK-28233 #close
Change-Id: I2e28e5a5d007bd49e3df113ad567b011103899bf
In a three party scenario with INVITE with replaces, we need to
unhold the call, otherwise one party continues to get music on
hold, and the call is not properly bridged between them.
ASTERISK-30428
Change-Id: I5675df11e739be5226b328f8828d4b8d81fbefb4
A comment at the top of voicemail.conf says that #include
cannot be used in voicemail.conf because this breaks
the ability for app_voicemail to auto-update passwords.
This is factually incorrect, since Asterisk has no problem
updating files that are #include'd in the main configuration
file, and this does work in voicemail.conf as well.
ASTERISK-30479 #close
Change-Id: I3bf7d275849ab83f55f7fb6702a75a3077ee1df3
The F option in the xmldocs for the Queue application
was erroneously duplicated, causing it to display
twice on the wiki. The two sections are now merged into one.
Additionally, the description for the d option was quite
vague. Some more details are added to provide context
as to what this actually does.
ASTERISK-30486 #close
Change-Id: I6706cea708b5cc781f59f8652c2cb377e55aed7e
The unit test XML output was counting all registered tests as "run"
even when only a subset were actually requested to be run and
the "failures" attribute was missing.
* The "tests" attribute of the "testsuite" element in the
output XML now reflects only the tests actually requested
to be executed instead of all the tests registered.
* The "failures" attribute was added to the "testsuite"
element.
Also added 2 new unit tests that just pass and fail to be
used for CI testing.
Change-Id: Ia137814b5aeb0e1a44c75034bd3615c26021da69
There are two main parts of the change associated with this
commit. These are driven by the change in call order of
pubsub_on_rx_refresh and pubsub_on_evsub_state by pjproject
when an in-dialog SUBSCRIBE is received.
First, the previous behavior was for pjproject to call
pubsub_on_rx_refresh before calling pubsub_on_evsub_state
when an in-dialog SUBSCRIBE was received that changes the
subscription state.
If that change was a termination due to a re-SUBSCRIBE with
an expires of 0, we used to use the call to pubsub_on_rx_refresh
to set the substate of the evsub to TERMINATE_PENDING before
pjproject could call pubsub_on_evsub_state.
This substate let pubsub_on_evsub_state know that the
subscription TERMINATED event could be ignored as there was
still a subsequent NOTIFY that needed to be generated and
another call to pubsub_on_evsub_state to come with it.
That NOTIFY was sent via serialized_pubsub_on_refresh_timeout
which would see the TERMINATE_PENDING state and transition it
to TERMINATE_IN_PROGRESS before triggering another call to
pubsub_on_evsub_state (which now would clean up the evsub.)
The new pjproject behavior is to call pubsub_on_evsub_state
before pubsub_on_rx_refresh. This means we no longer can set
the state to TERMINATE_PENDING to tell pubsub_on_evsub_state
that it can ignore the first TERMINATED event.
To handle this, we now look directly at the event type,
method type and the expires value to determine whether we
want to ignore the event or use it to trigger the evsub
cleanup.
Second, pjproject now expects the NOTIFY to actually be sent
during pubsub_on_rx_refresh and avoids the protocol violation
inherent in sending a NOTIFY before the SUBSCRIBE is
acknowledged by caching the sent NOTIFY then sending it
after responding to the SUBSCRIBE.
This requires we send the NOTIFY using the non-serialized
pubsub_on_refresh_timeout directly and let pjproject handle
the protocol violation.
ASTERISK-30469
Change-Id: I05c1d91a44fe28244ae93faa4a2268a3332b5fd7
Various changes to ensure that the lexers and parsers can be correctly
generated when REBUILD_PARSERS is enabled.
Some notes:
* Because of the version of flex we are using to generate the lexers
(2.5.35) some post-processing in the Makefile is still required.
* The generated lexers do not contain the problematic C99 check that
was being replaced by the call to sed in the respective Makefiles so
it was removed.
* Since these files are generated, they will include trailing
whitespace in some places. This does not need to be corrected.
Change-Id: Ibbd343606fcf5c0d285b1599e6e8e59f514f2e4e
Add periodic beep option to one-touch recording by setting
the touch variable TOUCH_MONITOR_BEEP or
TOUCH_MIXMONITOR_BEEP to the desired interval in seconds.
If the interval is less than 5 seconds, a minimum of 5
seconds will be imposed. If the interval is set to an
invalid value, it will default to 15 seconds.
A new test event PERIODIC_HOOK_ENABLED was added to the
func_periodic_hook hook_on function to indicate when
a hook is started. This is so we can test that the touch
variable starts the hook as expected.
ASTERISK-30446
Change-Id: I800e494a789ba7a930bbdcd717e89d86040d6661
While it is possible to create multiple mixmonitor instances
on a channel, it was not previously possible to mute individual
instances.
This change includes the ability to specify the MixMonitorID
when calling the manager action: MixMonitorMute. This will
allow an individual MixMonitor instance to be muted via id.
This id can be stored as a channel variable using the 'i'
MixMonitor option.
As part of this change, if no MixMonitorID is specified in
the manager action MixMonitorMute, Asterisk will set the mute
flag on all MixMonitor spy-type audiohooks on the channel.
This is done via the new audiohook function:
ast_audiohook_set_mute_all.
ASTERISK-30464
Change-Id: Ibba8c7e750577aa1595a24b23316ef445245be98
Sending the "RECORD FILE" command without the optional
`offset_samples` argument can result in two beeps playing on the
channel.
This bug has been present since Asterisk 0.3.0 (2003-02-06).
ASTERISK-30457 #close
Change-Id: I95e88aa59378784d7f0eb648843f090e6723b787
Fix issue with returning empty instead of dumping
the JSON string when recursing.
Also adds a unit test to capture this fix.
ASTERISK-30441 #close
Change-Id: If0bde9f3fe84f7af485e0838205cc21e0f752a85
DTMF frames are not handled in app_dial when sent towards the
caller. This means that if DTMF is sent to the calling party
and the call has not yet been answered, the DTMF is not audible.
This is now fixed by relaying DTMF frames if only a single
destination is being dialed.
ASTERISK-29516 #close
Change-Id: Iafd7430ac2915126d42dc48f0b73b262452ee027
Naveen Albert
George Joseph
Jaco Kroon
Sean Bright
zhengsh
Sean Bright
Joshua C. Colp
Gitea
Henning Westerholt
Mike Bradeen
Maximilian Fridrich
The_Blode