Currently, when the first marked user enters the conference that
contains waitmarked users, a prompt is played indicating that the user
is being placed into the conference. Unfortunately, this prompt is
played to the marked user and not the waitmarked users which is not
very helpful.
This patch changes that behavior to play a prompt stating
"The conference will now begin" to the entire conference after adding
and unmuting the waitmarked users since the design of confbridge is not
conducive to playing a prompt to a subset of users in a conference in
an asynchronous manner.
(closes issue PQ-1396)
Review: https://reviewboard.asterisk.org/r/3155/
Reported by: Steve Pitts
........
Merged revisions 407857 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 407858 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407859 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a number of small-ish problems that were noticed when
witnessing the records that the FreePBX dialplan produces:
(1) Mid-call events (as well as privacy options) have the ability to change the
overall state of the Dial operation after the called party answers. This
means that publishing the DialEnd event when the called party is premature;
we have to wait for the execution of these subroutines to complete before
we can signal the overall status of the DialEnd. This patch moves that
publication and adds handlers for the mid-call events.
(2) The AST_FLAG_OUTGOING channel flag is cleared if an after bridge goto
datastore is detected. This flag was preventing CDRs from being recorded
for all outbound channels that had a 'continue' option enabled on them by
the Dial application.
(3) The CDR engine now locks the 'Dial' application as being the CDR
application if it detects that the current CDR has entered that app. This
is similar to the logic that is done for Parking. In general, if we entered
into Dial, then we want that CDR to record the application as such - this
prevents pre-dial handlers, mid-call handlers, and other shenaniganry
from changing the application value.
(4) The CDR engine now checks for the AST_SOFTHANGUP_HANGUP_EXEC in more places
to determine if the channel is in hangup logic or dead. In either case, we
don't want to record changes in the channel.
(5) The default option for "endbeforehexten" has been changed to "yes". In
general, you don't want to see CDRs in the 'h' exten or in hangup logic.
Since the semantics of that option changed in 12, it made sense to update
the default value as well.
(6) Finally, because we now have the ability to synchronize on the messages
published to the CDR topic, on shutdown the CDR engine will now synchronize
to the messages currently in flight. This helps to ensure that all
in-flight CDRs are written before shutting down.
(closes issue ASTERISK-23164)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3154
........
Merged revisions 407084 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A couple of the scripts had errors that would not allow a full migration to
take place. The extensions table needed to make its 'id' column a primary
key in order to work with mysql. The other script ...add_endpoints... was
missing tables that it was trying to add columns to.
Added the primary key on id for extensions and added the tables in for the
missing pjsip configuration options. While it is not ideal to modify already
released scripts this was a case where it had to be done due to errors in
the script and lacking a better alternative.
Review: https://reviewboard.asterisk.org/r/3167/
........
Merged revisions 407019 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The per console verbose level feature as previously implemented caused a
large performance penalty. The fix required some minor incompatibilities
if the new rasterisk is used to connect to an earlier version. If the new
rasterisk connects to an older Asterisk version then the root console
verbose level is always affected by the "core set verbose" command of the
remote console even though it may appear to only affect the current
console. If an older version of rasterisk connects to the new version
then the "core set verbose" command will have no effect.
* Fixed the verbose performance by not generating a verbose message if
nothing is going to use it and then filtered any generated verbose
messages before actually sending them to the remote consoles.
* Split the "core set debug" and "core set verbose" CLI commands to remove
the per module verbose support that cannot work with the per console
verbose level.
* Added a silent option to the "core set verbose" command.
* Fixed "core set debug off" tab completion.
* Made "core show settings" list the current console verbosity in addition
to the root console verbosity.
* Changed the default verbose level of the 'verbose' setting in the
logger.conf [logfiles] section. The default is now to once again follow
the current root console level. As a result, using the AMI Command action
with "core set verbose" could again set the root console verbose level and
affect the verbose level logged.
(closes issue AST-1252)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3114/
........
Merged revisions 405431 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405432 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This simply pulls in the changes that were breaking from the CHANGES file
and updates a few other areas accordingly. It also removes the 10 => 11
notes, which are traditionally removed from each major version and stored
in the appropriate UPGRADE-X.txt file.
........
Merged revisions 398100 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It moves the pickup code out of features.c and into pickup.c
* It removes the vast majority of dead code out of features.c. In particular,
this includes the parking code.
(issue ASTERISK-22134)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ill conceived chan_agent is no more. It is now replaced by
app_agent_pool.
Agents login using the AgentLogin() application as before. The
AgentLogin() application no longer does any authentication.
Authentication is now the responsibility of the dialplan. (Besides, the
authentication done by chan_agent did not match what the voice prompts
asked for.)
Sample extensions.conf
[login]
; Sample agent 1001 login
; Set COLP for in between calls so the agent does not see the last caller COLP.
exten => 1001,1,Set(CONNECTEDLINE(all)="Agent Waiting" <1001>)
; Give the agent DTMF transfer and disconnect features when connected to a caller.
same => n,Set(CHANNEL(dtmf-features)=TX)
same => n,AgentLogin(1001)
same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS})
same => n,Hangup()
[caller]
; Sample caller direct connect to agent 1001
exten => 800,1,AgentRequest(1001)
same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS})
same => n,Hangup()
; Sample caller going through a Queue to agent 1001
exten => 900,1,Queue(agent_q)
same => n,Hangup()
Sample queues.conf
[agent_q]
member => Local/800@caller,,SuperAgent,Agent:1001
Under the hood operation overview:
1) Logged in agents wait for callers in an agents holding bridge.
2) Caller requests an agent using AgentRequest()
3) A basic bridge is created, the agent is notified, and caller joins the
basic bridge to wait for the agent.
4) The agent is either automatically connected to the caller or must ack
the call to connect.
5) The agent is moved from the agents holding bridge to the basic bridge.
6) The agent and caller talk.
7) The connection is ended by either party.
8) The agent goes back to the agents holding bridge.
To avoid some locking issues with the agent holding bridge, I needed to
make some changes to the after bridge callback support. The after bridge
callback is now a list of requested callbacks with the last to be added
the only active callback. The after bridge callback for failed callbacks
will always happen in the channel thread when the channel leaves the
bridging system or is destroyed.
(closes issue ASTERISK-21554)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2657/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This process also involved a large amount of rework regarding how to redial
the Parker when a channel leaves a parking lot due to timeout. An attended
transfer channel variable has been added to attended transfers to extensions
that will eventually park (but haven't at the time of transfer) as well.
This resolves one of the two BUGBUG comments remaining in res_parking.
(issues ASTERISK-21877)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2638/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r386792, the ability to play prompts to the first caller in a call queue was
added. While this is arguably a bug fix for those who expect the first caller
to continue receiving prompts while the agent is dialed, it has the side effect
of preventing the first caller from hearing the agent immediately upon
bridging. This may not be a problem for those who really want this option, but
for those who didn't care whether or not the first caller in queue heard their
position, it was an issue.
This patch disables the ability for the first caller in the queue to hear
prompts and adds a new option, announce-to-first-user, to queues.conf. Those
who the behavior can enable it by setting this value to True.
Note that if we ever implement the ability to have the prompts be stopped
upon bridging, this option can be removed.
(closes issue ASTERISK-21782)
Reported by: Remi Quezada
........
Merged revisions 391215 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 391241 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The channel variable ATTENDED_TRANSFER_COMPLETE_SOUND is no longer
channel driver specific. If the channel variable is set on the
transferrer channel, the sound will be played to the target of an attended
transfer.
* The channel variable BRIDGEPEER becomes a comma separated list of peers
in a multi-party bridge. The BRIDGEPEER value can have a maximum of 10
peers listed. Any more peers in the bridge will not be included in the
list. BRIDGEPEER is not valid in holding bridges like parking since those
channels do not talk to each other even though they are in a bridge.
* The channel variable BRIDGEPVTCALLID is only valid for two party bridges
and will contain a value if the BRIDGEPEER's channel driver supports it.
* The channel variable DYNAMIC_PEERNAME is redundant with BRIDGEPEER and
is removed. The more useful DYNAMIC_WHO_ACTIVATED gives the channel name
that activated the dynamic feature.
* The channel variables DYNAMIC_FEATURENAME and DYNAMIC_WHO_ACTIVATED are
set only on the channel executing the dynamic feature. Executing a
dynamic feature on the bridge peer in a multi-party bridge will execute it
on all peers of the activating channel.
(closes issue ASTERISK-21555)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2582/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Masquerades are an insane implementation detail within Asterisk. It generates
a number of useless and confusing events, and manipulates channels in a way
that semantically doesn't make sense. I've given a fairly thorough review of
masquerade code and its usage on the wiki at
https://wiki.asterisk.org/wiki/x/IwBRAQ.
While ultimately it makes the most sense to abandon masquerades altogether,
it will take some time to completely irradicate. Even then, there may always
be code that's not worth rewriting to get rid of the masquerade.
This patch does two things to make masquerades slightly less insane:
* When swapping the names of the original and clone channel, only emit a
single rename event of original -> original<ZOMBIE>. The original code
issued three rename events to accomplish the same end.
* In addition to swapping the names of the channels, also swap their
uniqueid's. This allows the 'Uniqueid' field to be used as a stable
identifier for a channel from and external interface, such as AMI.
Review: https://reviewboard.asterisk.org/r/2266/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379023 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ringinuse=no queue members can receive more than one call if these
calls happen at nearly the same time.
* Fix so a queue member does not receive more than one call from a queue.
NOTE: This fix does not prevent multiple calls to a member if the member
is in more than one queue.
* Did some refactoring to eliminate some code redundancy.
(issue ASTERISK-16115)
Reported by: nik600
Patches:
jira_asterisk_16115_single_q_v1.8.patch (license #5621) patch uploaded by rmudgett
Modified
* Revert the -r341580 and -r341599 changes adding the queues.conf
check_state_unknown option as it was added in an attempt to fix this
problem. The fix did not need to be optional. The fix should not have
tried to explicitly set the device state. Setting the device state by
something other than the device introduces a race condition. I also could
not see how the change would be effective other than delaying the
app_queue code long enough for the device state to propagate to app_queue.
........
Merged revisions 378663 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378683 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378687 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
BRIDGE_FEATURES did not previously support the automixmonitor feature. Now it
does. In addition, the BRIDGE_FEATURES variable would not apply features to
the proper party based on whether the feature option letter was in caps or
in lowercase (both ways would apply it to the caller). Now uppercase applies
to the caller while lowercase applies to the callee (like with the dial option)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The '-' char is supposed to be ignored by the dialplan extension matching.
Unfortunately, it's treatment is not handled consistently throughout the
extension matching code.
* Made the old exten matching code consistently ignore '-' chars.
* Made the old exten matching code consistently handle case in the
matching.
* Made ignore empty character sets.
* Fixed ast_extension_cmp() to return -1, 0, or 1 as documented. The only
user of it in pbx_lua.c was testing for -1. It was originally returning
the strcmp() value for less than which is not usually going to be -1.
* Fix character set sorting if the sets have the same number of characters
and start with the same character. Character set [0-9] now sorts before
[02-9a] as originally intended.
* Updated some extension label and priority already in use warnings to
also indicate if the extension is aliased.
(closes issue ASTERISK-19205)
Reported by: Philippe Lindheimer, Birger "WIMPy" Harzenetter
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2201/
........
Merged revisions 376688 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376689 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376690 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a caller enters a queue and no queue member answers the call, the current
behaviour can be a little odd depending on the paused status of the queue
members. If any queue member is paused, but not all, the CDR disposition
will be BUSY. If all queue members are paused, then the CDR disposition is
based instead on the disposition of the call prior to entering the Queue.
This patch modifies the behaviour in the following ways:
* If no queue members are paused, the CDR disposition is whatever the
disposition was prior to going into Queue. If the call was answered this
will be ANSWERED; otherwise, it is NO ANSWER.
* If some queue members are pused, the CDR result is NO ANSWER. (This is a
change in behaviour, as the result would previously have been BUSY)
* If all queue members are paused, the CDR result is whatever the result was
prior to going into Queue. This is the same as the behaviour prior to this
patch.
* If the caller hangs up, times out, or presses '*' with the 'h' option, the
CDR disposition is again not set and is dependent on whether or not the
caller was Answered prior to entering Queue.
This patch was based on one provided by Thomas Arimont, but has been modified
to accomodate findings by the reviewers.
Review: https://reviewboard.asterisk.org/r/2064/
(closes issue AST-906)
Reported by: Thomas Arimont
(closes issue ASTERISK-17776)
Reported by: Attila Megyeri
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The following dialplan applications now recognize 'W' to pause sending
DTMF for one second in addition to the previously existing 'w' that paused
sending DTMF for half a second. Dial, ExternalIVR, and SendDTMF.
* The chan_dahdi analog port dialing and deferred DTMF dialing for PRI now
distinguishes between 'w' and 'W'. The 'w' pauses dialing for half a
second. The 'W' pauses dialing for one second.
* Created dahdi_dial_str() in chan_dahdi that eliminated a lot of
duplicated dialing code and diagnostic messages for the channel driver.
(closes issue ASTERISK-20039)
Reported by: Jeremiah Gowdy
Patches:
jgowdy-wait-6-22-2012.diff (license #5621) patch uploaded by Jeremiah Gowdy
Expanded patch to add support in chan_dahdi.
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matt Jordan informed me that it was more appropriate to use an
astman_send_ack here instead of making an event response. I've also
used this opportunity to update UPGRADE.txt to mention this change
in behavior.
(issue AST-969)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371889 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The HANGUPCAUSE hash (trunk only) meant to replace SIP_CAUSE has now
been replaced with the HANGUPCAUSE and HANGUPCAUSE_KEYS dialplan
functions to better facilitate access to the AST_CAUSE translations
for technology-specific cause codes. The HangupCauseClear application
has also been added to remove this data from the channel.
(closes issue SWP-4738)
Review: https://reviewboard.asterisk.org/r/2025/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This channel driver is a replacement for both chan_gtalk and chan_jingle but adds additional features not found in either.
These features include full configuration reload, video, full codec support, bidirectional cause code mapping, hold,
unhold, and ringing indication. It is also compliant with the current published Jingle and Google Jingle specifications.
The original Google Talk protocol is also supported for Google Voice interoperability.
You may ask yourself though where the name motif comes from... and I would say to you... music!
motif: a perceivable or salient recurring fragment or succession of notes
Sorta like a jingle!
Review: https://reviewboard.asterisk.org/r/1917/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ANI2 information is now parsed out of SIP From headers when present in
the oli, isup-oli, and ss7-oli parameters and is available via the
CALLERID(ani2) dialplan function.
(closes issue ASTERISK-19912)
Patch-by: Rob Gagnon
Review: https://reviewboard.asterisk.org/r/1947/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368784 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ISDN ETSI PTP and Q.SIG (And SS7 in future) have support for reporting who
was the original redirecting party of a call.
* Added support for the original redirecting party and reason to the
REDIRECTING function and the system core as well as to the stubbed
locations in sig_pri.c.
Review: https://reviewboard.asterisk.org/r/1829/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362779 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ASTERISK-18809 eliminated the legacy macro invocation of the stdexten in
favor of the Gosub method without a means of backwards compatibility.
(issue ASTERISK-18809)
(closes issue ASTERISK-19457)
Reported by: Matt Jordan
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1855/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added ability to use multiple lines on phone, so for one device in configuration multiple lines can be defined, it allows to have multiple calls on one phone, callwaiting and switching between calls.
* Added ability for translation on-screen menu to multiple languages. Tested on Russian languages. Supported encodings: ISO 8859-1, ISO 8859-2, ISO 8859-4, ISO 8859-5, ISO 2022-JP. Language controlled by 'language' and on-screen menu of phone
* Other described in CHANGES file
Testing done by issue tracker users: ibercom, scsiborg, idarwin, TeknoJuce, c0rnoTa.
Tested on production system by Jonn Taylor (jonnt) using phone models: Nortel i2004, 1120E and 1140E.
(closes issue ASTERISK-16890)
Review: https://reviewboard.asterisk.org/r/1243/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds GoSub alternatives to connected line, redirecting, and CCSS
macro hooks so that macro can finally be deprecated. This also adds
deprecation warnings for those features when used and in documentation.
Review: https://reviewboard.asterisk.org/r/1760/
(closes issue SWP-4256)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change permits each verbose destination (consoles, logger) to have its
own concept of what the verbosity level is. The big feature here is that
the logger will now be able to capture a particular verbosity level without
condemning each console to need to suffer that level of verbosity.
Additionally, a stray 'core set verbose' will no longer change what will go
to the log.
Review: https://reviewboard.asterisk.org/r/1599/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355413 65c4cc65-6c06-0410-ace0-fbb531ad65f3