After 5 years in mantis and over a year on reviewboard, SRTP support is finally
being comitted. This includes generic CHANNEL dialplan functions that work for
getting the status of whether a call has secure media or signaling as defined
by the underlying channel technology and for setting whether or not a new
channel being bridged to a calling channel should have secure signaling or
media. See doc/tex/secure-calls.tex for examples.
Original patch by mikma, updated for trunk and revised by me.
(closes issue #5413)
Reported by: mikma
Tested by: twilson, notthematrix, hemanshurpatel
Review: https://reviewboard.asterisk.org/r/191/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Extract the SS7 specific code out of chan_dahdi like what was done to
ISDN/PRI and analog signaling. The new SS7 structures were modeled on
sig_pri.
The changes to sig_pri are an enhancement and a bug fix made possible
because SS7 was extracted.
1) The sig_pri TRANSFERCAPABILITY channel variable should have been set
unconditionally in sig_pri_new_ast_channel().
2) SS7/PRI transfer capability interaction in dahdi_new() fixed because of
SS7 extraction.
3) Module ref count error in dahdi_new() if startpbx failed to start the
PBX for some reason.
Review: https://reviewboard.asterisk.org/r/661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Suppress the warning about unexpected control subclass frames for
AST_CONTROL_CONNECTED_LINE, AST_CONTROL_REDIRECTING, and AST_CONTROL_AOC
in file.c:waitstream_core().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
What I did not originally see in my previous commit was that even though the
next digit could be detected before the previous was considered ended, the
detection of the next digit effectively ends the detection of the previous.
Therefore, the length moves in lockstep with the digit, and no separate counter
is needed for the length alone.
(closes issue #17371)
Reported by: alecdavis
(closes issue #17474)
Reported by: kenner
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changes.
1. RFC 3261 states in section 17.1.2.2 and 17.1.1.2 that retransmission
timers should initially be set to timer T1. T1 by default is 500ms.
Asterisk was starting the retransmission timers at T1*2 which shouldn't
cause any problems, but is not RFC compliant.
2. RFC 3261 states in section 17.1.2.2 that for a non-INVITE client transaction,
if the retransmit timer fires while in the proceeding state that
the request must be retransmitted. Asterisk currently ack's
requests for both INVITE and non-INVITE transactions when a
1XX response is received, this patch changes this for non-INVITE requests.
3. The 'registerattempts' option in sip.conf is supposed to set
how many registry attempts will be made before giving up. When
this option is set to 1, I would expect only one registry attempt
to be made before stopping because of a failure, but instead two are
made. In my opinion this is not expected behavior. This option does
not indicate that these are re-attempts. The logic behind this option
has been changed to only attempt registers the exact number of times
this option is set to. If this option is 0, it still continues to
re-attempt the registration forever.
Review: https://reviewboard.asterisk.org/r/687/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268205 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem would manifest itself if your dialplan matching could accept
more digits to match than were actually dialed. The time out waiting for
overlap digits disconnected the call instead of matching any accumulated
digits to the dialplan.
Accidental conversion of a break out of loop as a break out of switch.
(closes issue #17401)
Reported by: avalentin
Patches:
issue17401_digit_timeout.patch uploaded by rmudgett (license 664)
Tested by: avalentin, rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267928 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Updated the UPGRADE.txt and CHANGES file stating that CDR records will not be explicity
written unless cdr.conf exists and is configured.
(closes issue #17373)
Reported by: wdoekes
Tested by: pabelanger
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267624 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After some debugging, the random chan_h323 build failures appear to be due
to complications introduced by some chan_h323 specific build stuff getting
triggered during a clean. Simplify this by moving the h323 clean commands
down into channels/makefile.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ASTCFLAGS was specified with the make command, Makefile.rules was using
the specified value from the command line and not the one here, making it so this
flag would go missing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the ability to announce a call to an endpoint when there are no B
channels available. A call waiting call is a SETUP message with no B
channel selected.
Relevant specification: EN 300 056, EN 300 057, EN 300 058
For DAHDI/ISDN channels, the CHANNEL() dialplan function now supports the
"no_media_path" option.
* Returns "0" if there is a B channel associated with the call.
* Returns "1" if no B channel is associated with the call. The call is
either on hold or is a call waiting call.
If you are going to allow incoming call waiting calls then you need to use
CHANNEL(no_media_path) do determine if you must drop a call to accept the
new call.
Review: https://reviewboard.asterisk.org/r/568/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Two struct sockaddr_ins are created when applying directmedia
host access rules. The addresses of these are passed to the RTP
engine to be filled in. However, the RTP engine inspects the fields
of the structs before actually taking action. This inspection caused
valgrind to be a bit unhappy.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Tilghman Lesher
Terry Wilson
Richard Mudgett
Paul Belanger
Kevin P. Fleming
David Vossel
Russell Bryant
Leif Madsen
Mark Michelson