After 5 years in mantis and over a year on reviewboard, SRTP support is finally
being comitted. This includes generic CHANNEL dialplan functions that work for
getting the status of whether a call has secure media or signaling as defined
by the underlying channel technology and for setting whether or not a new
channel being bridged to a calling channel should have secure signaling or
media. See doc/tex/secure-calls.tex for examples.
Original patch by mikma, updated for trunk and revised by me.
(closes issue #5413)
Reported by: mikma
Tested by: twilson, notthematrix, hemanshurpatel
Review: https://reviewboard.asterisk.org/r/191/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the ability to announce a call to an endpoint when there are no B
channels available. A call waiting call is a SETUP message with no B
channel selected.
Relevant specification: EN 300 056, EN 300 057, EN 300 058
For DAHDI/ISDN channels, the CHANNEL() dialplan function now supports the
"no_media_path" option.
* Returns "0" if there is a B channel associated with the call.
* Returns "1" if no B channel is associated with the call. The call is
either on hold or is a call waiting call.
If you are going to allow incoming call waiting calls then you need to use
CHANNEL(no_media_path) do determine if you must drop a call to accept the
new call.
Review: https://reviewboard.asterisk.org/r/568/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added ability to send and receive ETSI Explicit Call Transfer (ECT)
messages to eliminate tromboned calls.
Note: Asterisk already supported initiating the transfer of calls to
eliminate tromboned calls to libpri so there was nothing to do for the
asterisk portion.
Review: https://reviewboard.asterisk.org/r/520/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266926 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Newer versions of libical (which we require) store the header file in a
libical/ subfolder and include an ical.h file that does a #warning for
deprecation and then #includes <libical/ical.h>. Since we now test for
libical/ical.h, we can change the #includes back to <libical/ical.h> and
remove the test which specifically adds /usr/include/libical as an include
directory.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This uses a modified version of pabelanger's patch that checks for NTLM support
instead, which was added in 0.29.0 which is what is required for
res_calendar_ews.
(closes issue #17391)
Reported by: loloski
Patches:
issue17391.patch.v2 uploaded by pabelanger (license 224)
Tested by: twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265793 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This ensures cross-platform compatibility, even among Linux distributions,
which don't always put headers in the same place.
(closes issue #17391)
Reported by: loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264248 | tilghman | 2010-05-19 12:41:29 -0500 (Wed, 19 May 2010) | 17 lines
Internal timing is now on by default, if you're using DAHDI 2.3 or above.
The reason for ensuring DAHDI 2.3 or above is that this version ensures that
a timer is always available, whereas in previous versions, it was possible
for DAHDI to be loaded, but have no drivers to actually generate timing. If
internal_timing was turned on in this circumstance, a complete lack of audio
would result. This is the reason why internal_timing was not on by default.
However, now that DAHDI ensures the availability of a timer, there is no
reason for this setting to be off (and in fact, it solves a great many initial
user problems).
(closes issue #15932)
Reported by: dimas
Patches:
20100519__issue15932.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This will save a considerable amount of CPU on the BSDs, including Mac OS X,
as it eliminates several places in the code that we previously used a busy
loop. Additionally, this adds a res_timing interface, using kqueue timers.
Review: https://reviewboard.asterisk.org/r/543/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Revision -r1489 of the libpri 1.4 branch corrected a deviation from Q.931
Section 5.3.2. However, this resulted in an unexpected behaviour change
to the upper layer (Asterisk).
This change uses pri_hangup_fix_enable() to follow Q.931 Section 5.3.2
call hangup better if the version of libpri supports it.
(issue #17104)
Reported by: shawkris
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262569 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We nicely detect the right flags on each system for building Asterisk with
pthreads, then ignore it for every other build option that requires us to
build with pthreads. This caused some items to return a false negative.
Also cleanup some minor naming issues that caused "library library" redundancy
in the output.
(closes issue #17303)
Reported by: stuarth
Patches:
20100507__issue17303.diff.txt uploaded by tilghman (license 14)
Tested by: stuarth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r259748 | qwell | 2010-04-28 14:17:38 -0500 (Wed, 28 Apr 2010) | 7 lines
Remove usage of `id` since it isn't useful and was causing breakge.
Solaris `id` doesn't support the -u argument. Instead of figuring out how to
fix this to work on Solaris, I decided to check why it was necessary and where
else it was used. It was only used in one place, and it hasn't been needed
for a very long time (I question whether it was ever needed).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@259760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r259352 | qwell | 2010-04-27 14:29:26 -0500 (Tue, 27 Apr 2010) | 5 lines
Support the silly OSes that don't have ar and strip.
Since AC_PATH_TOOL is equiv to AC_CHECK_TOOL when path isn't specified, and
AC_PATH_TOOLS doesn't exist, we'll just switch to AC_CHECK_TOOLS.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@259353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These changes add the ability to run 'make asterisk.txt' just like the existing
'make asterisk.pdf' commands to generate a text document from the TeX files we
have in the doc/tex/ directory. I've also updated a few of the .tex files because
they weren't properly escaping certain characters so they would show up as Unicode
characters (like [U+021C]). Made changes to the configure scripts so it would
detect the catdvi program which is required to convert the .dvi file generated
by latex.
I've also added a few lines to the build_tools/prep_tarball script so that the
text documentation gets generated and added to future tarballs of Asterisk
releases.
(closes issue #17220)
Reported by: lmadsen
Patches:
asterisk.txt.patch uploaded by lmadsen (license 10)
asterisk.txt.patch-v4 uploaded by pabelanger (license 224)
Tested by: lmadsen, pabelanger
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Detect all platforms that don't like that, either, and ensure that when documentation is
missing, we pass a non-NULL pointer when outputting the corresponding documentation.
(closes issue #16689)
Reported by: bklang
Patches:
20100209__issue16689__with_tests.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/497/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r242520 | tilghman | 2010-01-24 00:33:01 -0600 (Sun, 24 Jan 2010) | 8 lines
Only rebuild bison and flex source files on demand, if bison and flex are detected by the configure script.
Changed after discussion on the -dev list about possible unnecessary build
failures, due to checkouts/untars causing these special source files to
possibly be newer than their resulting C files. This should additionally
ensure that nobody need learn about extra Makefile arguments to ensure the
proper files get rebuilt when changes are made to these special source files.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r236585 | seanbright | 2009-12-28 10:12:08 -0500 (Mon, 28 Dec 2009) | 7 lines
Try a test compile to see if PTHREAD_ONCE_INIT requires extra braces.
There was conditional code (based on build platform) to optioinally wrap
PTHREAD_ONCE_INIT in braces that was removed since it is fixed in newer versions
of Solaris/OpenSolaris, but I am still running into it on Solaris 10 x86 so add
a configure-time check for it.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Set OSARCH to linux-gnu even if host_os is linux-gnueabi
* When checking if we are Linux, check OSARCH rather than host_os
The newer ARM ABI ("EABI") shows the OS name 'linux-gnueabi' rather than
'linux-gnu' . This patch sets OSARCH to be 'linux-gnu' even in such a case.
OSARCH is tested for the value of 'linux-gnu' in one or two places in the
tree. This patch also fixes the check libcap to check for $OSARCH rather
than $host_os .
See also: http://wiki.debian.org/ArmEabiPort
Merged revisions 225957 via svnmerge from
http://svn.digium.com/svn/asterisk/branches/1.4
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added handling of received HOLD/RETRIEVE messages and the optional ability
to transfer a held call on disconnect similar to an analog phone.
* Added CallRerouting/CallDeflection support for Q.SIG, ETSI PTP, ETSI PTMP.
Will reroute/deflect an outgoing call when receive the message.
Can use the DAHDISendCallreroutingFacility to send the message for the
supported switches.
* Added ability to send/receive keypad digits in the SETUP message.
Send keypad digits in SETUP message: Dial(DAHDI/g1[/K<keypad_digits>][/extension])
Access any received keypad digits in SETUP message by: ${CHANNEL(keypad_digits)}
* Added support for BRI PTMP NT mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Telecom Specs in NZ suggests that SUB ADDRESS is always on, so doing
"desk to desk" between offices each with an asterisk box over the ISDN
should then be possible, without a whole load of DDI numbers required.
(closes issue #15604)
Reported by: alecdavis
Patches:
asterisk_subaddr_trunk.diff11.txt uploaded by alecdavis (license 585)
Some minor modificatons were made.
Tested by: alecdavis, rmudgett
Review: https://reviewboard.asterisk.org/r/405/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Terry Wilson
Tilghman Lesher
Richard Mudgett
Tzafrir Cohen
Jason Parker
Leif Madsen
Russell Bryant
Sean Bright