https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r224260 | rmudgett | 2009-10-16 15:25:23 -0500 (Fri, 16 Oct 2009) | 18 lines
Never released PRI channels when using Busy() or Congestion() dialplan apps.
When the Busy() or Congestion() application is used towards ISDN (an ISDN
progress is sent), the responding ISDN Disconnect or Release may contain
the ISDN cause user busy or one of the congestion causes. In chan_dahdi.c
these causes will only set the needbusy or needcongestion flags and not
activate the softhangup procedure. Unfortunately only the latter can
interrupt the endless wait loop of Busy()/Congestion().
Result: PRI channels staying in state busy for the rest of asterisk life
or until the other end times out and forces the call to clear.
(issue #14292)
Reported by: tomaso
Patches:
disc_rel_userbusy.patch uploaded by tomaso (license 564)
(This patch is unrelated to the issue.)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Two examples of its use are included, and the usage could be expanded in some
cases into certain configuration options where time periods are specified.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224225 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Explains new options for detecting DTMF CID on fxo lines
(issue #9096)
Reported by: fleed
Patches:
chan_dahid_sample_config.patch uploaded by sum (license 766)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224144 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Ability has been added to both manager command SIPnotify as well as console
command sip notify. Message body is stored in the "Content" variable. An
example is present in sip_notify.conf.
(closes issue #13926)
Reported by: jthurman
Patches:
sip-notify-svn189463.diff uploaded by gareth (license 208)
Tested by: gareth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224035 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r223804 | jpeeler | 2009-10-12 18:12:50 -0500 (Mon, 12 Oct 2009) | 8 lines
Ensure ringing continues for branched calls after progress is received
While waiting for an answer, don't send progress for branched calls
for which ringing was sent.
(closes issue #15028)
Reported by: fnordian
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223832 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r223692 | kpfleming | 2009-10-12 10:30:40 -0500 (Mon, 12 Oct 2009) | 13 lines
Remove automatic switching from T.38 to voice mode in chan_sip.
chan_sip has some code to automatically switch from T.38 mode to voice mode when
a voice frame is written to the channel while it is in T.38 mode; this was
intended to handle the situation when a FAX transmission has ended and the channel
is not yet hung up, but is causing problems at the beginning of FAX sessions as
well when there are still voice frames 'in flight' at the time the T.38 negotiation
completes. This patch removes the automatic switchover.
(issue #16025)
Reported by: jamicque
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_sip has some code to automatically switch from T.38 mode to voice mode when
a voice frame is written to the channel while it is in T.38 mode; this was
intended to handle the situation when a FAX transmission has ended and the channel
is not yet hung up, but is causing problems at the beginning of FAX sessions as
well when there are still voice frames 'in flight' at the time the T.38 negotiation
completes. This patch removes the automatic switchover, and changes app_fax to
explicitly switch off T.38 mode when the FAX transmission process ends.
(closes issue #16025)
Reported by: jamicque
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a pending reinvite were sent, we might not properly
send connected party info since we were checking the wrong
flag. This was a rare occurrence, but could still happen
nevertheless.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223617 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r223485 | russell | 2009-10-11 12:22:52 -0500 (Sun, 11 Oct 2009) | 6 lines
Don't use data outside of its scope.
The purpose of this code was to have a hangup frame put on the list of deferred
frames. However, the code that read the hangup frame was outside of the scope
of where the hangup frame was declared.
........
r223486 | russell | 2009-10-11 12:25:06 -0500 (Sun, 11 Oct 2009) | 2 lines
Remove some unnecessary code.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CONFIRMED status doesn't imply busy or free, that is handled with the TRANSP
field. Luckily, libical already sets the is_busy status on the span for us.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SendFAX() and ReceiveFAX() can be given options to indicate whether they should
act as the calling or called party; this mode should be used to decide whether
to initiate a switchover to T.38, not the direction that the FAX transfer will
take place.
(closes issue #16039)
Reported by: jamicque
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223330 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using callbackextension or specifing the peer name
in a registration string, the peer's specific auth settings
set by the "auth=" strings within the peer definition are not
used by the registration. Thanks to ebroad for reporting the
issue and providing the patch.
(closes issue #15955)
Reported by: ebroad
Patches:
regauthfix.patch uploaded by ebroad (license 878)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This isn't the best way to do this, but it is the easiest. There are some
limitations that are going to need to be addressed at some point with reloads
and when I (or someone else) work on that, then the API can be updated to
handle passing the private config data that the calendar tech modules need in
a better way as well.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223016 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_sip calls pbx_exec on a pvt's owner channel while only the
pvt lock is held. Since pbx_exec calls ast_cel_report_event which
attempts to lock the channel, invalid locking order occurs. Channels
should be locked before pvt's.
(closes issue #15512)
Reported by: lmsteffan
Patches:
ast_cel_deadlock_15512.diff uploaded by dvossel (license 671)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222981 65c4cc65-6c06-0410-ace0-fbb531ad65f3
externtcpport and externtlsport need to be declared as static
variables. Thanks to russell for finding and pointing this out.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222878 | russell | 2009-10-08 14:45:47 -0500 (Thu, 08 Oct 2009) | 44 lines
Make filestream frame handling safer by isolating frames before returning them.
This patch is related to a number of issues on the bug tracker that show
crashes related to freeing frames that came from a filestream. A number of
fixes have been made over time while trying to figure out these problems, but
there re still people seeing the crash. (Note that some of these bug reports
include information about other problems. I am specifically addressing
the filestream frame crash here.)
I'm still not clear on what the exact problem is. However, what is _very_
clear is that we have seen quite a few problems over time related to unexpected
behavior when we try to use embedded frames as an optimization. In some cases,
this optimization doesn't really provide much due to improvements made in other
areas.
In this case, the patch modifies filestream handling such that the embedded frame
will not be returned. ast_frisolate() is used to ensure that we end up with a
completely mallocd frame. In reality, though, we will not actually have to malloc
every time. For filestreams, the frame will almost always be allocated and freed
in the same thread. That means that the thread local frame cache will be used.
So, going this route doesn't hurt.
With this patch in place, some people have reported success in not seeing the
crash anymore.
(SWP-150)
(AST-208)
(ABE-1834)
(issue #15609)
Reported by: aragon
Patches:
filestream_frisolate-1.4.diff2.txt uploaded by russell (license 2)
Tested by: aragon, russell
(closes issue #15817)
Reported by: zerohalo
Tested by: zerohalo
(closes issue #15845)
Reported by: marhbere
Review: https://reviewboard.asterisk.org/r/386/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222880 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222797 | rmudgett | 2009-10-08 11:33:06 -0500 (Thu, 08 Oct 2009) | 12 lines
Fix memory leak if chan_misdn config parameter is repeated.
Memory leak when the same config option is set more than once in an
misdn.conf section. Why must this be considered? Templates! Defining a
template with default port options and later adding to or overriding some
of them.
Patches:
memleak-misdn.patch
JIRA ABE-1998
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channels are stored in an ao2_container. When accessing an item within
an ao2_container the proper locking order is to first lock the container,
and then the items within it.
In ast_do_masquerade both the clone and original channel must be locked
for the entire duration of the function. The problem with this is that
it attemptes to unlink and link these channels back into the ao2_container
when one of the channel's name changes. This is invalid locking order as
the process of unlinking and linking will lock the ao2_container while
the channels are locked!!! Now, both the channels in do_masquerade are
unlinked from the ao2_container and then locked for the entire function.
At the end of the function both channels are unlocked and linked back
into the container with their new names as hash values.
This new method of requiring all channels and tech pvts to be unlocked
before ast_do_masquerade() or ast_change_name() required several
changes throughout the code base.
(closes issue #15911)
Reported by: russell
Patches:
masq_deadlock_trunk.diff uploaded by dvossel (license 671)
Tested by: dvossel, atis
(closes issue #15618)
Reported by: lmsteffan
Patches:
deadlock_local_attended_transfers_trunk.diff uploaded by dvossel (license 671)
Tested by: lmsteffan, dvossel
Review: https://reviewboard.asterisk.org/r/387/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222761 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222691 | rmudgett | 2009-10-07 16:51:24 -0500 (Wed, 07 Oct 2009) | 14 lines
chan_misdn.c:process_ast_dsp() memory leak
misdn.conf: astdtmf must be set to "yes". With "no", buffer loss does not
occur.
The translated frame "f2" when passing through ast_dsp_process() is not
freed whenever it is not used further in process_ast_dsp(). Then in the
end it is never ever freed.
Patches:
translate.patch
JIRA ABE-1993
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222692 65c4cc65-6c06-0410-ace0-fbb531ad65f3