This change gives framehooks a reverse-direction masquerade callback in
addition to chan_fixup_cb similar to the callback added to datastores
to handle the same situation. The new callback provides the same
parameters as the fixup callback, but is called on the new channel's
framehooks before moving framehooks from the old channel to the new
channel. This gives the framehooks an oppurtunity to decide whether
they should remain on the new channel or be removed.
This new callback is used to prevent the PJSIP T.38 framehook from
remaining on a masqueraded channel if the new channel is not also a
PJSIP channel. This was causing a crash when a local channel was
masqueraded into a PJSIP channel and the framehook was executed on the
local channel since the channel's tech private data was not structured
as expected.
Review: https://reviewboard.asterisk.org/r/4001/
........
Merged revisions 423503 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 423504 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This function acts like strsep with three exceptions...
* The separator is a single character instead of a string.
* Separators inside quotes are treated literally instead of like separators.
* You can elect to have leading and trailing whitespace and quotes
stripped from the result and have '\' sequences unescaped.
Like strsep, ast_strsep maintains no internal state and you can call it
recursively using different separators on the same storage.
Also like strsep, for consistent results, consecutive separators are not
collapsed so you may get an empty string as a valid result.
Tested by: George Joseph
Review: https://reviewboard.asterisk.org/r/3989/
........
Merged revisions 423476 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 423478 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423480 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Empty here means that there are no formats in the format_cap structure
or the only format in it is the "none" format.
I've added calls to check the emptiness of a format_cap in a few places
in order to short-circuit operations that would otherwise be pointless
as well as to prevent some assertions from being triggered in cases
where channels with no formats are used.
........
Merged revisions 423414 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423415 65c4cc65-6c06-0410-ace0-fbb531ad65f3
res_pjsip_pubsub has two separate checks that it makes when a SUBSCRIBE
arrives.
* It checks that there is a subscription handler for the Event
* It checks that there are body generators for the types in the Accept header
The problem is, there's nothing that ensures that these two things will
actually mesh with each other. For instance, Asterisk will accept a subscription
to MWI that accepts pidf+xml bodies. That doesn't make sense.
With this commit, we add some type information to the mix. Subscription
handlers state they generate data of type X, and body generators state
that they consume data of type X. This way, Asterisk doesn't end up in
some hilariously mismatched situation like the one in the previous paragraph.
ASTERISK-24136 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/3877
Review: https://reviewboard.asterisk.org/r/3878
........
Merged revisions 423344 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 423348 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the install to only install the hook script if
DAHDI is enabled. It also adds the script to the uninstall task, and
moves the DAHDI_UDEV_HOOK_DIR variable so that it's not between the
_MAKEOPTS variables and their comment.
This allows installs which specify a --prefix to work normally, as
long as they don't enable DAHDI.
Review: https://reviewboard.asterisk.org/r/3972/
........
Merged revisions 423281 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423283 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch was supposed to go into a team branch, but I was a bit fast on the
gun before 'svn switch' had apparently moved the target branch over.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423238 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changes made during format improvements resulted in the
recording to voicemail option 'm' of the MixMonitor app
writing a zero length duration in the msgXXXX.txt file.
This change introduces a new function ast_ratestream(),
which provides the sample rate of the format associated
with the stream, and updates the app_voicemail function
for ast_app_copy_recording_to_vm to calculate the right
duration.
Review: https://reviewboard.asterisk.org/r/3996/
ASTERISK-24328 #close
........
Merged revisions 423192 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. The number of file descriptors an ioqueue instance can handle is fixed, so we
now spawn the required number to handle the load.
2. Our transport identifiers were exceeding the range supported by pjnath.
3. The TURN client did not set up client binding causing needless bandwidth usage.
4. The code no longer updates address information on each packet.
5. STUN traffic was getting looped back to Asterisk instead of going through the
TURN server.
6. Synchronization now ensures things are completely setup or destroyed.
7. Logging now reflects the target the TURN server is sending to/receiving from
on our behalf.
ASTERISK-23577 #close
Reported by: Jay Jideliov
ASTERISK-23634 #close
Reported by: Roman Skvirsky
Review: https://reviewboard.asterisk.org/r/3982/
........
Merged revisions 423150 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 423151 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 423152 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- adds sort=randstart (next to sort=, sort=random, sort=alpha)
- combines duplicate moh option parsing code into a single function
- adds deprecationwarnings for application=r to sort randomly
- adds deprecationwarnings for random=yes to sort randomly
- removes invisible code that was supposed to stay until 1.8
The sort=randstart works like sort=alpha, except we start at a random
position.
Review: https://reviewboard.asterisk.org/r/3991/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423065 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module supports sending both unicast and multicast RTP
to a specified target. Multicast functionality is the same as
chan_multicast_rtp was. In the case of unicast a specific
IP address and port can be specified, along with optional RTP
engine and format in the form of:
UnicastRTP/<ip address>:<port>/<engine>/<format>
This can be useful for sending a copy of a media stream to
another application for processing.
Review: https://reviewboard.asterisk.org/r/3981/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423004 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_play_and_record_full() has a parameter called "acceptdtmf" that is a
string of acceptable DTMF digits that may be pressed by a caller to end
and accept the recording.
ARI uses this function in order to perform recording, and it provides
options for what is passed as acceptdtmf to ast_play_and_record_full().
By default, ARI passes an empty string, with the intention that no DTMF
can be used to end the recording.
The problem is that ast_play_and_record_full() attempts to be "helpful"
by setting "#" as the acceptdtmf if an empty string or NULL pointer
has been passed in. With ARI, this results in unexpected behavior
occurring if you have attempted to intercept "#" yourself in order
to perform some other manipulation of the live recording.
This change removes the "helpful" behavior by no longer accepting
"#" as a default acceptdtmf if none is specified by the caller of
ast_play_and_record_full(). This makes the ARI scenario work as
expected.
The other callers of ast_play_and_record_full() are app_voicemail
and app_minivm, and in both cases, they pass an explicit "#" to
ast_play_and_record_full() as acceptdtmf, so they are unaffected
by this change.
........
Merged revisions 422964 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422965 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422967 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It would be useful to get the current hold status of a channel.
Added CHANNEL(onhold) item that returns 1 (onhold) and 0 (not-onhold) for
the hold status of a channel.
ASTERISK-24038
Reported by: Matt Jordan
AFS-113 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3983/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422870 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On review /r/3977, it was recommended to note in the
sample configuration about the size limitation for
resource lists. However, since there was no section in
the sample configuration at all for resource list
subscriptions, I decided to make a separate commit
where I have added the necessary sample configuration
as well as the size limitation warning.
........
Merged revisions 422853 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422854 65c4cc65-6c06-0410-ace0-fbb531ad65f3
PJSIP, unless a constant is modified at compilation time, limits
SIP requests to 4000 bytes. Full-state RLS notifications can easily
exceed this limit with moderately small lists.
This changeset allows for Asterisk to work around this size limit by
performing its own allocation of the transmission data buffer. This
way, Asterisk can allocate a buffer that exceeds the built-in maximum.
We still impose our own limit of 64000 bytes, mainly because making
allocations larger than that is a bit absurd.
ASTERISK-24181 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/3977
........
Merged revisions 422851 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a CDR is forked, a new CDR is created and appended to the CDR chain for
the Party A. The forked CDR starts life off as a clone of the last
non-finalized for the particular Party A. In the past, merely copying over
the snapshots for Party A/Party B would be sufficient. However, as the CDRs
now contain cached information from Party A - specifically application/data,
context, and extension - we need to copy that over during a fork as well.
Huzzah for unit tests catching this when the context/extension were derived
from a cached value on the CDR instead of on Party A.
........
Merged revisions 422769 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422770 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On some systems, a timeval's tv_sec/tv_usec will be unsigned lont ints, as
opposed to long ints. When the RTP engine formats these as strings, it was
previously formatting them as signed integers, which can result in some
odd negative timestamp values (particularly on 32-bit systems). This patch
formats the values as unsigned long integers.
........
Merged revisions 422766 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422767 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The context/extension in a CDR is generally considered the destination of a
call. When looking at a 2-party call CDR, users will typically be presented
with the following:
context exten channel dest_channel app data
default 1000 SIP/8675309 SIP/1000 Dial SIP/1000,,20
However, if the Dial actually takes place in a Macro, the current behaviour
in 12 will result in the following CDR:
context exten channel dest_channel app data
macro-dial s SIP/8675309 SIP/1000 Dial SIP/1000,,20
The same is true of a GoSub:
context exten channel dest_channel app data
subs dial_stuff SIP/8675309 SIP/1000 Dial SIP/1000,,20
This generally makes the context/exten fields less than useful.
It isn't hard to preserve these values in the CDR state machine; however, we
need to have something that informs us when a channel is executing a
subroutine. Prior to this patch, there isn't anything that does this.
This patch solves this problem by adding a new channel flag,
AST_FLAG_SUBROUTINE_EXEC. This flag is set on a channel when it executes a
Macro or a GoSub. The CDR engine looks for this value when updating a Party A
snapshot; if the flag is present, we don't override the context/exten on the
main CDR object. In a funny quirk, executing a hangup handler must *not* abide
by this logic, as the endbeforehexten logic assumes that the user wants to see
data that occurs in hangup logic, which includes those subroutines. Since
those execute outside of a typical Dial operation (and will typically have
their own dedicated CDR anyway), this is unlikely to cause any heartburn.
Review: https://reviewboard.asterisk.org/r/3962/
ASTERISK-24254 #close
Reported by: tm1000, Tony Lewis
Tested by: Tony Lewis
........
Merged revisions 422718 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422719 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422720 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes an issue where CDRs would get stuck generating an infinite
number of CDRs, eventually crashing Asterisk (and consuming a lot of memory
along the way).
When a channel enters into a multi-party bridge, the CDR engine creates
mappings of each participant to each other participant, picking the 'A' party
as it goes. So, if we have four channels in a multi-party bridge (Alice, Bob,
Charlie, Denise), we would have something like:
Alice => Bob
Alice => Charlie
Alice => Denise
Bob => Charlie
Bob => Denise
Charlie => Denise
This works fine when participants enter the bridge a single time.
When a participant leaves a bridge, the CDRs for that channel are transitioned
to a finalized state.
The bug occurs if Bob rejoins. When the CDR engine creates mappings between the
channels, it walks through all the participants currently in the bridge, and
realizes that no one in the bridge can create a CDR with the channel (Bob).
As such it creates a new CDR for the candidate and appends it to that
candidate's chain. Unfortunately, on this particular code path, it doesn't
stop traversing the candidate's chain. Since we just added ourselves to the
chain, this causes the loop to keep going, constantly adding new CDRs.
This patch makes it so the engine bails when it creates a CDR match in this
case.
Review: https://reviewboard.asterisk.org/r/3964/
ASTERISK-24241 #close
Reported by: Deepak Singh Rawat
Tested by: Deepak Singh Rawat
ASTERISK-24208
Reported by: Frankie Chin
........
Merged revisions 422715 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422716 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The CHANNEL() audionativeformat, videonativeformat, audioreadformat, and
audiowriteformat now need locking since the media format rework when
accessing the channel's format pointers.
* Increased the buffer size for CHANNEL() audionativeformat and
videonativeformat output strings since the allow=all can be a lengthy
list.
* Tweaked the CHANNEL() XML documentation for secure_bridge_signaling,
secure_bridge_media, and state.
* Ensured the output buffer is initialized for secure_bridge_signaling and
secure_bridge_media.
* Made use the locked_copy_string() macro instead of inlining it for trace
and checkhangup.
........
Merged revisions 422700 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds an option to the dial API that marks an outgoing dial as replacing the dialing channel for the purpose of propagating accountcode. When it is used, AST_CHANNEL_REQUESTOR_REPLACEMENT is used instead of AST_CHANNEL_REQUESTOR_BRIDGE_PEER when setting accountcodes on the involved channels with ast_channel_req_accountcodes.
Review: https://reviewboard.asterisk.org/r/3968/
........
Merged revisions 422684 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422697 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Testsuite tests will occasionally fail because on reception of a 200 OK SIP response,
an AST_CONTROL_ANSWER frame is queued prior to when media has finished being
negotiated. This is because session supplements are called into before PJSIP's
inv_session code has told us that media has been updated. Sometimes the queued answer
frame is handled by the PBX thread before the ensuing media negotiations occur, causing
a test failure.
As it turns out, there is another place that session supplements could be called into, which is
after media has finished getting negotiated. What this commit introduces is a means for session
supplements to indicate when they wish to be called into when handling an incoming SIP response.
By default, all session supplements will be run at the same point that they were prior to this
commit. However, session supplements may indicate that they wish to be handled earlier than
normal on redirects, or they may indicate they wish to be handled after media has been negotiated.
In this changeset, two session supplements have been updated to indicate a preference for when
they should be run: res_pjsip_diversion executes before handling redirection in order to get
information from the Diversion header, and chan_pjsip now handles responses to INVITEs after
media negotiation to fix the race condition mentioned previously.
ASTERISK-24212 #close
Reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/3930
........
Merged revisions 422536 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422542 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422543 65c4cc65-6c06-0410-ace0-fbb531ad65f3