After R340970 Asterisk was still polling the RTCP file descriptor after RTCP is
shut down and removed. If the descriptor happened to have data ready when the
removal occured then Asterisk would go into an infinite loop trying to read
data that it can never actually access. This change disables the audio RTCP
file descriptor for the duration of the T.38 transaction.
(closes issue ASTERISK-18951)
Reported-by: Kristijan Vrban
........
Merged revisions 353915 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353916 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This feature also causes the sending complete ie to be sent for switch
types that do not automatically send the ie. (EuroISDN/ETSI)
The main difference between dialing Dial(DAHDI/g0/1234w888) and
Dial(DAHDI/g0/1234,,D(888)) is the sending of the sending complete ie.
(closes issue ASTERISK-19176)
Reported by: rmudgett
Tested by: rmudgett
........
Merged revisions 353867 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353868 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Removes references to tlsbindport from http.conf.sample and manager.conf.sample
* Properly bind to port specified in tlsbindaddr, using the default port if specified.
* On a reload, properly close socket if the service has been disabled.
A note has been added to UPGRADE.txt to indicate how ports must be set for TLS.
(closes issue ASTERISK-16959)
reported by Olaf Holthausen
(closes issue ASTERISK-19201)
reported by Chris Mylonas
(closes issue ASTERISK-19204)
reported by Chris Mylonas
Review: https://reviewboard.asterisk.org/r/1709
........
Merged revisions 353770 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353820 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A previous patch I committed from ASTERISK-16930 unexpectedly changed some output for
the AMI action "sippeers" which this patch changes back. Also, this aligns the output
for the cli command "sip show peers" and fixes another issue that patch introduced by
using ast_sockaddr_stringify calls multiple times without immediately using the pointer.
I also went ahead and did a little janitorial work to clean up whitespace in
_sip_show_peers.
(issue ASTERISK-16930)
(closes issue ASTERISK-19281)
Reported by: Patrick El Youssef
Patches:
ASTERISK-19281.diff uploaded by Walter Doekes (license 5674)
........
Merged revisions 353769 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353771 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are a number of cleaner looking wrappers for ast_sockaddr_stringify_fmt
available which are slightly more readable than using a direct call to
ast_sockaddr_stringify_fmt. This patch switches a number of those calls in
chan_sip to use those wrappers and is generally harmless.
(Closes issue ASTERISK-16930)
Reported by: Michael L. Young
Patches:
chan_sip-broken-registration-1.8.diff uploaded by Michael L. Young (license 5026)
........
Merged revisions 353720 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353721 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353725 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CEL eventtype field for ODBC and PGSQL backends should be USER_DEFINED
instead of the user defined event name supplied by the CELGenUserEvent
application. If the field is output as a number, the user defined name
does not have a value and is always output as 21 for USER_DEFINED and the
userdeftype field would be required to supply the user defined name.
The following CEL backends (cel_odbc, cel_pgsql, cel_custom, cel_manager,
and cel_sqlite3_custom) can be independently configured to remove this
inconsistency.
* Allows cel_manager, cel_custom, and cel_sqlite3_custom to behave the
same way.
(closes issue ASTERISK-17189)
Reported by: Bryant Zimmerman
Review: https://reviewboard.asterisk.org/r/1669/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ast_channel name was opaquified, the channel search functions did not
get converted correctly. As a result ExtenSpy which uses a channel
iterator search by exten@context could never find anything.
* Updated the doxygen documentation for the search functions in channel.h.
Review: https://reviewboard.asterisk.org/r/1702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST_AUDIOHOOK_TRIGGER_WRITE and AST_AUDIOHOOK_WANTS_DTMF were overlapping which
may have caused unintended side effects. This patch moves
AST_AUDIOHOOK_TRIGGER_WRITE, and updates AST_AUDIOHOOK_TRIGGER_MODE to reflect
the original intention.
This will affect existing modules that use these flags, so be sure to recompile
as necessary.
(closes issue ASTERISK-19246)
Reported by: feyfre
........
Merged revisions 353598 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353599 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The calendaring tech modules depend on res_calendar and initially
res_calendar just bumped the use count so that it couldn't be unloaded.
res_calendar can potentially create many threads and I've seen issues
where the Asterisk shutdown has failed where it looked like these
threads could be the culprit.
This patch adds unload support for res_calendar. Unloading res_calendar
will also unload the dependant tech modules as well.
(closes issue ASTERISK-16744)
Review: https://reviewboard.asterisk.org/r/1657/
........
Merged revisions 353502 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353503 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353504 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's dnsmgr currently takes a pointer to an ast_sockaddr and updates it
anytime an address resolves to something different. There are a couple of
issues with this. First, the ast_sockaddr is usually the address of an
ast_sockaddr inside a refcounted struct and we never bump the refcount of those
structs when using dnsmgr. This makes it possible that a refresh could happen
after the destructor for that object is called (despite ast_dnsmgr_release
being called in that destructor). Second, the module using dnsmgr cannot be
aware of an address changing without polling for it in the code. If an action
needs to be taken on address update (like re-linking a SIP peer in the
peers_by_ip table), then polling for this change negates many of the benefits
of having dnsmgr in the first place.
This patch adds a function to the dnsmgr API that calls an update callback
instead of blindly updating the address itself. It also moves calls to
ast_dnsmgr_release outside of the destructor functions and into cleanup
functions that are called when we no longer need the objects and increments the
refcount of the objects using dnsmgr since those objects are stored on the
ast_dnsmgr_entry struct. A helper function for returning the proper default SIP
port (non-tls vs tls) is also added and used.
This patch also incorporates changes from a patch posted by Timo Teräs to
ASTERISK-19106 for related dnsmgr issues.
(closes issue ASTERISK-19106)
Review: https://reviewboard.asterisk.org/r/1691/
........
Merged revisions 353371 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353397 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r353321 | alecdavis | 2012-01-31 11:16:22 +1300 (Tue, 31 Jan 2012) | 25 lines
Merged revisions 353320 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r353320 | alecdavis | 2012-01-31 10:57:49 +1300 (Tue, 31 Jan 2012) | 18 lines
RFC3261 Section 8.1.1.5. The sequence number value MUST be expressible as a 32-bit unsigned integer
* fix: use %u instead of %d when dealing with CSeq numbers - to remove possibility of -ve numbers.
* fix: change all uses of seqno and friends (ocseq icseq) from 'int' or 'unsigned int' to uint32_t.
Summary of CSeq numbers.
An initial CSeq number must be less than 2^31
A CSeq number can increase in value up to 2^32-1
An incrementing CSeq number must not wrap around to 0.
Tested with Asterisk 1.8.8.2 with Grandstream phones.
alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1699/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk is used with various third-party libraries (CURL, PostgresSQL,
many others) that have the ability themselves to use OpenSSL, it is possible
for conflicts to arise in how the OpenSSL libraries are initialized and
shutdown. This patch addresses these conflicts by 'wrapping' the important
functions from the OpenSSL libraries in a new shared library that is part
of Asterisk itself, and is loaded in such a way as to ensure that *all*
calls to these functions will be dispatched through the Asterisk wrapper
functions, not the native functions.
This new library is optional, but enabled by default. See the CHANGES file
for documentation on how to disable it.
Along the way, this patch also makes a few other minor changes:
* Changes MODULES_DIR to ASTMODDIR throughout the build system, in order to
more closely match what is used during run-time configuration.
* Corrects some errors in the configure script where AC_CHECK_TOOLS was used
instead of AC_PATH_PROG.
* Adds a new variable for linker flags in the build system (DYLINK), used for
producing true shared libraries (as opposed to the dynamically loadable
modules that the build system produces for 'regular' Asterisk modules).
* Moves the Makefile bits that handle installation and uninstallation of the
main Asterisk binary into main/Makefile from the top-level Makefile.
* Moves a couple of useful preprocessor macros from optional_api.h to
asterisk.h.
Review: https://reviewboard.asterisk.org/r/1006/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, if an m-line in an SDP offer or answer had a port number of zero,
that line was skipped, and resulted in an 'Unsupported SDP media type...'
warning message. This was misleading, as the media type was not unsupported,
but was ignored because the m-line indicated that the media stream had been
rejected (in an answer) or was not going to be used (in an offer).
........
Merged revisions 353260 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353261 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes up softkey endcall. Previous code was a copy of onhook, now
allows for endcall softkey to be used while device is still onhook.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I also went ahead and took a little time to make sure that the manager value
AMI_SUCCESS was used instead of just return 0 being thrown around everywhere since that's
how we handle this stuff these days.
(closes issue ASTERISK-19249)
Reporter: Jamuel Starkey
Patches:
res_monitor.c-ASTERISK-19249.diff uploaded by Jamuel Starkey (license 5766)
........
Merged revisions 352959 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 352965 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352981 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a CALENDAR_SUCCESS=1/0 variable that is set to show whether or
not CALENDAR_WRITE has passed. This patch also adds some debugging for caldav
PUT responses and no longer treats responses with no body as an error (as a PUT
gets a 201 Created with no body).
(closes issue ASTERISK-16903)
Reported by: Clod Patry
Tested by: Terry Wilson
Patches:
calendarstatus.diff uploaded by Clod Patry (License #5138), slightly modified by Terry Wilson
Review: https://reviewboard.asterisk.org/r/1692/
- This line, and those below, will be ignored--
M res/res_calendar.c
M res/res_calendar_exchange.c
M res/res_calendar_caldav.c
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352916 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r352863 | alecdavis | 2012-01-27 13:08:03 +1300 (Fri, 27 Jan 2012) | 19 lines
Merged revisions 352862 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r352862 | alecdavis | 2012-01-27 13:05:30 +1300 (Fri, 27 Jan 2012) | 12 lines
rfc4235 - Section 4.1: Versions MUST be representable using a non-negative 32 bit integer.
If a BLF subscription exists for long enough, using %d may print negative version numbers.
Unlikely, as 2^32 at 1 update per second is ~137 years, or half that before the versions number started going negative.
Tested with Asterisk 1.8.8.2 with Grandstream phones.
alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1694/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For whatever reason, we don't have a single function for copying data like this
from SIP peers to the SIP pvt. This patch adds the copying of amaflags to the
sip_pvt, but it would probably be worth discussing this function along with
the others that essentially just copy some amount of data from a peer to a
private.
(Closes issue ASTERISK-19029)
Reported by: Matt Lehner
........
Merged revisions 352755 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 352756 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A long time ago, in a land far far away, we added "asterisk/ast_version.h",
which provides the ast_get_version() and ast_get_version_num() functions. These
were added so that modules that needed the version information for the Asterisk
instance they were loaded in could actually get it (as opposed the version that
they were compiled against). We changed everything in the tree to use the
new mechanism (although later main/test.c was added using the old method).
However, the old mechanism was never removed, and as a result, new code is
still trying to use it.
This commit removes asterisk/version.h and replaces it with a header that
will generate a compile-time error if you try to use it (the error message
tells you which header you should use instead). It also removes the Makefile
and build_tools bits that generated the file, and it updates main/test.c to
use the 'proper' method of getting the Asterisk version information.
This is an API change and thus is being committed for trunk only, but it's
a fairly minor one and definitely improves the situation for out-of-tree
modules.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
Avoid unnecessary rebuilds of main/test.c.
main/test.c includes "asterisk/version.h", when it should include
"asterisk/ast_version.h" instead (and it should use the ast_get_version()
and ast_get_version_num() functions). This commit modifies it to extract
the Asterisk version information using the proper APIs, and as a result means
that main/test.c no longer needs to be rebuilt when a Subversion checkout
is updated or modified.
........
Merged revisions 352612 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352625 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix authenticate MESSAGE losing custom headers added by the MESSAGE_DATA
function in the authorization attempt.
* Pass up better From header contents for SIP to use. Now is in the
"display-name" <URI> format expected by MessageSend. (Note that this is a
behavior change that could concievably affect some people.)
* Block user from adding standard headers that are added automatically.
(To, From,...)
* Allow the user to override the Content-Type header contents sent by
MessageSend.
* Decrement Max-Forwards header if the user transferred it from an
incoming message.
* Expand SIP short header names so the dialplan and other code only has to
deal with the full names.
* Documents what SIP expects in the MessageSend(from) parameter.
(closes issue ASTERISK-18992)
Reported by: Yuri
(closes issue ASTERISK-18917)
Reported by: Shaun Clark
Review: https://reviewboard.asterisk.org/r/1683/
........
Merged revisions 352520 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Now that we have the right license for the Russian 1.4.22 sounds as well as the sounds
for the Australian English 1.4.22 sounds, we can finally set the sounds to use 1.4.22!
(closes issue ASTERISK-18978)
Reported by: Cameron Twomey
Patches:
confbridge.tar.001 uploaded by Cameron Twomey
confbridge.tar.002 uploaded by Cameron Twomey
........
Merged revisions 352367 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 352373 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352377 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continue channel opaque-ification by wrapping all of the stringfields.
Eventually, we will restrict what can actually set these variables, but
the purpose for now is to hide the implementation and keep people from
adding code that directly accesses the channel structure. Semantic
changes will follow afterward.
Review: https://reviewboard.asterisk.org/r/1661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While the FAXOPT function could be used to set the modem capabilities, the
input to that function was not being applied correctly to the spandsp layer.
This patch applies the current model capabilities before starting the spandsp
layer.
(closes issue: ASTERISK-16409)
Reported by: Kristijan Vrban
Tested by: Matt Jordan, Matthew Nicholson
Patches:
spandsp-modems-1.8.diff uploaded by mnicholson (license 5081)
spandsp-modems-10.diff uploaded by mnicholson (license 5081)
........
Merged revisions 352144 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 352149 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a feature patch which allows an 'announcement' option to be specified in
musiconhold.conf which should be set to the name of a sound. If a valid sound is
specified for this option, then it will be played on that music on hold class whenever
a channel bound to that class is put on hold as well as when Asterisk is able to detect
that a song has ended before starting the next song (excludes external players).
(closes ASTERISK-18977)
Reported by: Timo Teräs
Patches:
asterisk-moh-announcement.diff uploaded by Timo Teräs (license 5409)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352134 65c4cc65-6c06-0410-ace0-fbb531ad65f3