https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r120168 | russell | 2008-06-03 16:34:55 -0500 (Tue, 03 Jun 2008) | 4 lines
Fix another place where peer->callno could change at a very bad time, and also
fix a place where a peer was used after the reference was released.
(inspired by rev 120001)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r119838 | russell | 2008-06-02 15:08:04 -0500 (Mon, 02 Jun 2008) | 7 lines
Revert a change made for issue #12479. This change caused a regression such that
a dial string such as (IAX2/foo) did not automatically fall back to dialing the 's'
extension anymore.
(closes issue #12770)
Reported by: dagmoller
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@119839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r119238 | russell | 2008-05-30 07:55:36 -0500 (Fri, 30 May 2008) | 15 lines
Merged revisions 119237 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r119237 | russell | 2008-05-30 07:49:39 -0500 (Fri, 30 May 2008) | 7 lines
- Instead of only enforcing destination call number checking on an ACK, check
all full frames except for PING and LAGRQ, which may be sent by older versions
too quickly to contain the destination call number.
(As suggested by Tim Panton on the asterisk-dev list)
- Merge changes from team/russell/iax2-frame-race, which prevents PING and LAGRQ
from being sent before the destination call number is known.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@119239 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r116978 | russell | 2008-05-18 22:44:04 -0500 (Sun, 18 May 2008) | 4 lines
Avoid access of uninitialized memory. This caused a bunch of crashes for me
while doing load testing of development branch where I'm working on some
performance improvements.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116979 65c4cc65-6c06-0410-ace0-fbb531ad65f3
marked "urgent" are considered to be higher priority than other messages
and so they will be played before any other messages in a user's mailbox.
There are two ways to leave an urgent message.
1. send the 'U' option to VoiceMail().
2. Set review=yes in voicemail.conf. This will give instructions for
a caller to mark a message as urgent after the message has been recorded.
I have tested that this works correctly with file and ODBC storage, and James
Rothenberger (who wrote initial support for this feature) has tested its use
with IMAP storage.
(closes issue #11817)
Reported by: jaroth
Based on branch http://svn.digium.com/svn/asterisk/team/jrothenberger/asterisk-urgent
Tested by: putnopvut, jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r115565 | russell | 2008-05-08 14:15:25 -0500 (Thu, 08 May 2008) | 33 lines
Merged revisions 115564 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r115564 | russell | 2008-05-08 14:14:04 -0500 (Thu, 08 May 2008) | 25 lines
Fix a race condition that bbryant just found while doing some IAX2 testing.
He was running Asterisk trunk running IAX2 calls through a few Asterisk boxes,
however, the audio was extremely choppy. We looked at a packet trace and saw
a storm of INVAL and VNAK frames being sent from one box to another.
It turned out that what had happened was that one box tried to send a CONTROL
frame before the 3 way handshake had completed. So, that frame did not include
the destination call number, because it didn't have it yet. Part of our recent
work for security issues included an additional check to ensure that frames that
are supposed to include the destination call number have the correct one. This
caused the frame to be rejected with an INVAL. The frame would get retransmitted
for forever, rejected every time ...
This race condition exists in all versions that got the security changes,
in theory. However, it is really only likely that this would cause a problem in
Asterisk trunk. There was a control frame being sent (SRCUPDATE) at the _very_
beginning of the call, which does not exist in 1.2 or 1.4. However, I am fixing
all versions that could potentially be affected by the introduced race condition.
These changes are what bbryant and I came up with to fix the issue. Instead of
simply dropping control frames that get sent before the handshake is complete,
the code attempts to wait a little while, since in most cases, the handshake
will complete very quickly. If it doesn't complete after yielding for a little
while, then the frame gets dropped.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114891 | russell | 2008-04-30 11:30:01 -0500 (Wed, 30 Apr 2008) | 28 lines
Merge changes from team/russell/iax2_find_callno and iax2_find_callno_1.4
These changes address a critical performance issue introduced in the latest
release. The fix for the latest security issue included a change that made
Asterisk randomly choose call numbers to make them more difficult to guess by
attackers. However, due to some inefficient (this is by far, an understatement)
code, when Asterisk chose high call numbers, chan_iax2 became unusable after
just a small number of calls. On a small embedded platform, it would not be
able to handle a single call. On my Intel Core 2 Duo @ 2.33 GHz, I couldn't
run more than about 16 IAX2 channels. Ouch.
These changes address some performance issues of the find_callno() function
that have bothered me for a very long time. On every incoming media frame,
it iterated through every possible call number trying to find a matching
active call. This involved a mutex lock and unlock for each call number
checked. So, if the random call number chosen was 20000, then every media
frame would cause 20000 locks and unlocks. Previously, this problem was
not as obvious since Asterisk always chose the lowest call number it could.
A second container for IAX2 pvt structs has been added. It is an astobj2
hash table. When we know the remote side's call number, the pvt goes into
the hash table with a hash value of the remote side's call number. Then,
lookups for incoming media frames are a very fast hash lookup instead of an
absolutely insane array traversal.
In a quick test, I was able to get more than 3600% more IAX2 channels
on my machine with these changes.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114892 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114880 | kpfleming | 2008-04-30 09:46:57 -0500 (Wed, 30 Apr 2008) | 2 lines
use the ARRAY_LEN macro for indexing through the iaxs/iaxsl arrays so that the size of the arrays can be adjusted in one place, and change the size of the arrays from 32768 calls to 2048 calls when LOW_MEMORY is defined
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114884 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114537 | russell | 2008-04-22 13:03:33 -0500 (Tue, 22 Apr 2008) | 9 lines
If the dial string passed to the call channel callback does not indicate an
extension, then consider the extension on the channel before falling back
to the default.
(closes issue #12479)
Reported by: darren1713
Patches:
exten_dial_fix_chan_iax2.c.patch uploaded by darren1713 (license 116)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: oej
Tested by: jpeeler
This patch implements multiple parking lots for parked calls. The default parkinglot is used by default, however setting the channel variable PARKINGLOT in the dialplan will allow use of any other configured parkinglot. See configs/features.conf.sample for more details on setting up another non-default parkinglot. Also, one can (currently) set the default parkinglot to use in the driver configuration file via the parkinglot option.
Patch initially written by oej, brought up to date and finalized by mvanbaak, and then stabilized and converted to astobj2 by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114083 | twilson | 2008-04-11 17:32:51 -0500 (Fri, 11 Apr 2008) | 7 lines
Several places in the code called find_callno() (which releases the lock on the pvt structure) and then immediately locked the call and did things with it. Unfortunately, the call can disappear between the find_callno and the lock, causing Bad Stuff(tm) to happen.
Added find_callno_locked() function to return the callno withtout unlocking for instances that it is needed.
(issue #12400)
Reported by: ztel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r113784 | file | 2008-04-09 13:50:45 -0300 (Wed, 09 Apr 2008) | 4 lines
If we receive an AUTHREQ from the remote server and we are unable to reply (for example they have a secret configured, but we do not) then queue a hangup frame on the Asterisk channel. This will cause the channel to hangup and a HANGUP to be sent via IAX2 to the remote side which is the proper thing to do in this scenario.
(closes issue #12385)
Reported by: viraptor
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@113785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110628 | file | 2008-03-25 11:37:35 -0300 (Tue, 25 Mar 2008) | 4 lines
Add an option (transmit_silence) which transmits silence during both Record() and DTMF generation. The reason this is an option is that in order to transmit silence we have to setup a translation path. This may not be needed/wanted in all cases.
(closes issue #10058)
Reported by: tracinet
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111017 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r110336 | russell | 2008-03-20 16:54:58 -0500 (Thu, 20 Mar 2008) | 14 lines
Merged revisions 110335 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r110335 | russell | 2008-03-20 16:53:27 -0500 (Thu, 20 Mar 2008) | 6 lines
Fix some very broken code that was introduced in 1.2.26 as a part of the security
fix. The dnsmgr is not appropriate here. The dnsmgr takes a pointer to an address
structure that a background thread continuously updates. However, in these cases,
a stack variable was passed. That means that the dnsmgr thread would be continuously
writing to bogus memory.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110337 65c4cc65-6c06-0410-ace0-fbb531ad65f3
actual problems, per se. I also added format attributes to any printf wrapper functions I found that didn't have them. -Wsecurity and -Wmissing-format-attribute added to --enable-dev-mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: rizzo
Tested by: murf
Proposal of the changes to be made, and then an announcement of how they were accomplished:
http://lists.digium.com/pipermail/asterisk-dev/2008-February/032065.html
and:
http://lists.digium.com/pipermail/asterisk-dev/2008-March/032124.html
Here is a recap, file by file, of what I have done:
pbx/pbx_config.c
pbx/pbx_ael.c
All funcs that were passed a ptr to the context list, now will ALSO be passed a hashtab ptr to the same set.
Why? because (for the time being), the dialplan is stored in both, to facilitate a quick, low-cost move to
hash-tables to speed up dialplan processing. If it was deemed necessary to pass the context LIST, well, it
is just as necessary to have the TABLE available. This is because the list/table in question might not be
the global one, but temporary ones we would use to stage the dialplan on, and then swap into the global
position when things are ready.
We now have one external function for apps to use, "ast_context_find_or_create()" instead of the pre-existing
"find" and "create", as all existing usages used both in tandem anyway.
pbx_config, and pbx_ael, will stage the reloaded dialplan into local lists and tables, and
then call merge_contexts_and_delete, which will merge (now) existing contexts and
priorities from other registrars into this local set by copying them. Then, merge_contexts_and_delete will
lock down the contexts, swap the lists and tables, and unlock (real quick), and then
destroy the old dialplan.
chan_sip.c
chan_iax.c
chan_skinny.c
All the channel drivers that would add regcontexts now use the ast_context_find_or_create now.
chan_sip also includes a small fix to get rid of warnings about removing priorities that never got entered.
apps/app_meetme.c
apps/app_dial.c
apps/app_queue.c
All the apps that added a context/exten/priority were also modified to use ast_context_find_or_create instead.
include/asterisk/pbx.h
ast_context_create() is removed. Find_or_create_ is the new method.
ast_context_find_or_create() interface gets the hashtab added.
ast_merge_contexts_and_delete() gets the local hashtab arg added.
ast_wrlock_contexts_version() is added so you can detect if someone else got a writelock between your readlocking and writelocking.
ast_hashtab_compare_contexts was made public for use in pbx_config/pbx_ael
ast_hashtab_hash_contexts was in like fashion make public.
include/asterisk/pval.h
ast_compile_ael2() interface changed to include the local hashtab table ptr.
main/features.c
For the sake of the parking context, we use ast_context_find_or_create().
main/pbx.c
I changed all the "tree" names to "table" instead. That's because the original
implementation was based on binary trees. (had a free library). Then I moved
to hashtabs. Now, the names move forward too.
refcount field added to contexts, so you can keep track of how many modules
wanted this context to exist.
Some log messages that are warnings were inflated from LOG_NOTICE to LOG_WARNING.
Added some calls to ast_verb(3,...) for debug messages
Lots of little mods to ast_context_remove_extension2, which is now excersized in ways
it was not previously; one definite bug fixed.
find_or_create was upgraded to handle both local lists/tables as well as the globals.
context_merge() was added to do the per-context merging of the old/present contexts/extens/prios into the new/proposed local list/tables
ast_merge_contexts_and_delete() was heavily modified.
ast_add_extension2() was also upgraded to handle changes.
the context_destroy() code was re-engineered to handle the new way of doing things,
by exten/prio instead of by context.
res/ael/pval.c
res/ael/ael.tab.c
res/ael/ael.tab.h
res/ael/ael.y
res/ael/ael_lex.c
res/ael/ael.flex
utils/ael_main.c
utils/extconf.c
utils/conf2ael.c
utils/Makefile
Had to change the interface to ast_compile_ael2(), to include the hashtab ptr.
This ended up involving several external apps. The main gotcha was I had to
include lock.h and hashtab.h in several places.
As a side note, I tested this stuff pretty thoroughly, I replicated the problems
originally reported by Luigi, and made triply sure that reloads worked, and everything
worked thru "stop gracefully". I found a and fixed a few bugs as I was merging into
trunk, that did not appear in my tests of bug6002.
How's this for verbose commit messages?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r101693 | russell | 2008-01-31 18:32:49 -0600 (Thu, 31 Jan 2008) | 8 lines
Add some more sanity checking on IAX2 dial strings for the case that no peer
or hostname was provided, which is the one part of the dial string that is
absolutely required. If it's not there, bail out.
(closes issue #11897)
Reported by sokhapkin
Patch by me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@101694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
that was just merged from 1.4, so this is a changeover to those APIs to use the
macro versions, so that we properly detect errors from ast_sched_del, instead
of simply ignoring the return values.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@100497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r100465 | tilghman | 2008-01-27 15:59:53 -0600 (Sun, 27 Jan 2008) | 11 lines
When deleting a task from the scheduler, ignoring the return value could
possibly cause memory to be accessed after it is freed, which causes all
sorts of random memory corruption. Instead, if a deletion fails, wait a
bit and try again (noting that another thread could change our taskid
value).
(closes issue #11386)
Reported by: flujan
Patches:
20080124__bug11386.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76, flujan, stuarth`
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@100488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r99004 | russell | 2008-01-17 16:37:22 -0600 (Thu, 17 Jan 2008) | 10 lines
Have IAX2 optimize the codec translation path just like chan_sip does it. If
the caller's codec is in our codec list, move it to the top to avoid transcoding.
(closes issue #10500)
Reported by: stevedavies
Patches:
iax-prefer-current-codec.patch uploaded by stevedavies (license 184)
iax-prefer-current-codec.1.4.patch uploaded by stevedavies (license 184)
Tested by: stevedavies, pj, sheldonh
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r98943 | russell | 2008-01-15 17:26:52 -0600 (Tue, 15 Jan 2008) | 25 lines
Commit a fix for some memory access errors pointed out by the valgrind2.txt
output on issue #11698.
The issue here is that it is possible for an instance of a translator to get
destroyed while the frame allocated as a part of the translator is still being
processed. Specifically, this is possible anywhere between a call to ast_read()
and ast_frame_free(), which is _a lot_ of places in the code. The reason this
happens is that the channel might get masqueraded during this time. During a
masquerade, existing translation paths get destroyed.
So, this patch fixes the issue in an API and ABI compatible way. (This one is
for you, paravoid!)
It changes an int in ast_frame to be used as flag bits. The 1 bit is still used
to indicate that the frame contains timing information. Also, a second flag has
been added to indicate that the frame came from a translator. When a frame with
this flag gets released and has this flag, a function is called in translate.c to
let it know that this frame is doing being processed. At this point, the flag gets
cleared. Also, if the translator was requested to be destroyed while its internal
frame still had this flag set, its destruction has been deffered until it finds out
that the frame is no longer being processed.
Admittedly, this feels like a hack. But, it does fix the issue, and I was not able
to think of a better solution ...
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98944 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Add the Dialplan class, for NewExten and VarSet events, which should cut
down on the volume of traffic in the Call class.
2) Permit some commands to be run from multiple classes, such as allowing
DBGet to be run from either the System or the Reporting class.
3) Heavily document each class in the sample config, as there were several
that made no sense to be in the write= line, and two that made no sense to be
in the read= line (since they controlled no permissions there).
(Closes issue #10386)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
in the peers container after a reload. Somehow, this bug doesn't exist in 1.4 ...
(closes issue #11626)
(reported by pnlarsson, additional info from mvanbaak, fixed by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r93182 | oej | 2007-12-17 08:15:13 +0100 (MÃ¥n, 17 Dec 2007) | 8 lines
Issue 11574: Add dependencies on res_monitor and res_features.
I wonder if Asterisk can run at all without res_features. My guess is that
there's propably a lot of more modules and the core that depends on it.
Reported by: caio1982
(closes issue #11574)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Refer to the proper documentation
- Implement separate signalling/media QoS/CoS in many channels using RTP
- Improve warnings and verbose messages
- Deprecate some old settings
Minor modifications by me, a big effort from IgorG.
Thanks!
Reported by: IgorG
Patches:
qoscleanup-89394-4-trunk.patch uploaded by IgorG (license 20)
Tested by: IgorG
(closes issue #11145)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
issue #11449 has demonstrated that it actually was a performance hit on his
machine. I think that it is possible that it could still be a benefit on systems
under higher load, especially SMP systems, but I don't have enough time or interest
to find out at the moment.
(closes issue #11449)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@92676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90348 | russell | 2007-11-30 13:26:04 -0600 (Fri, 30 Nov 2007) | 8 lines
Change the behavior of ao2_link(). Previously, in inherited a reference.
Now, it automatically increases the reference count to reflect the reference
that is now held by the container.
This was done to be more consistent with ao2_unlink(), which automatically
releases the reference held by the container. It also makes it so it is
no longer possible for a pointer to be invalid after ao2_link() returns.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is an optimization for chan_iax2. This module is now heavily
multi-threaded. However, there is still a good number of globally shared
resources that prevent things from happen asynchronously. One of those things
was the global IAX frame queue. This queue was used to hold frames that have
been deferred for transmitting by another thread, and frames that may need to
get retransmitted.
I changed the frame queue to be per-call, since almost all of the frame queue
handling only cares about frames specific to a call number.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents modifying the strings in the stored variables,
and catched a few instances where this was actually done.
Given the differences between trunk and 1.4 (and the fact that this
is effectively an API change) it is better to fix 1.4 independently.
These are
chan_sip.c::sip_register()
chan_skinny.c:: near line 2847
config.c:: near line 1774
logger.c::make_components()
res_adsi.c:: near line 1049
I may have missed some instances for modules that do not build here.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- the *_CURRENT macros no longer need the list head pointer argument
- add AST_LIST_MOVE_CURRENT to encapsulate the remove/add operation when moving entries between lists
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
details and examples are in include/asterisk/stringfields.h.
Not applicable to older branches except for 1.4 which will
receive a fix for the routines that free memory pools.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r87686 | russell | 2007-10-30 16:19:09 -0500 (Tue, 30 Oct 2007) | 11 lines
Merge the changes from team/russell/iax2_poke_fix and iax2-poke-fix-trunk
There was a race condition related to the handling of POKEing peers. Essentially,
a reference to a peer is held by the scheduler when there are pending callbacks,
but the reference count didn't reflect it. So, it was possible for a peer to hit
a reference count of zero and have its destructor begin to be called at the same
time that the scheduler thread ran a POKE related callback. If that happened,
a crash would likely occur.
(closes issue #11082, closes issue #11094)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@87687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also fixes a few cli messages and some minor formatting.
(closes issue #11001)
Reported by: seanbright
Patches:
newcli.1.patch uploaded by seanbright (license 71)
newcli.2.patch uploaded by seanbright (license 71)
newcli.4.patch uploaded by seanbright (license 71)
newcli.5.patch uploaded by seanbright (license 71)
newcli.6.patch uploaded by seanbright (license 71)
newcli.7.patch uploaded by seanbright (license 71)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a patch for it. It replaces a bunch of simple calls to snprintf with ast_copy_string
(closes issue #10843)
Reported by: Corydon76
Patches:
2007092900_10843.diff uploaded by mvanbaak (license 7)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@84173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r83432 | russell | 2007-09-21 09:37:20 -0500 (Fri, 21 Sep 2007) | 4 lines
gcc 4.2 has a new set of warnings dealing with cosnt pointers. This set of
changes gets all of Asterisk (minus chan_alsa for now) to compile with gcc 4.2.
(closes issue #10774, patch from qwell)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@83433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r83175 | russell | 2007-09-19 14:13:29 -0500 (Wed, 19 Sep 2007) | 8 lines
When handling a reload of chan_iax2, don't use an ao2_callback() to POKE all
peers. Instead, use an iterator. By using an iterator, the peers container
is not locked while the POKE is being done. It can cause a deadlock if the
peers container is locked because poking a peer will try to lock pvt structs,
while there is a lot of other code that will hold a pvt lock when trying to
go lock the peers container.
(reported to me directly by Loic Didelot. Thank you for the debug info!)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@83176 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r81448 | russell | 2007-09-04 13:37:44 -0500 (Tue, 04 Sep 2007) | 4 lines
Remove the typedefs on ao2_container and ao2_iterator. This is simply because
we don't typedef objects anywhere else in Asterisk, so we might as well make
this follow the same convention.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r81433 | russell | 2007-09-03 13:57:53 -0500 (Mon, 03 Sep 2007) | 5 lines
Remove a couple of calls to ast_string_field_free_pools() on peers in error
handling blocks in the code for building peers. The peer object destructor
does this and doing it twice will cause a crash.
(closes issue #10625, reported by and patched by pnlarsson)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81434 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80895 | russell | 2007-08-25 12:37:39 -0500 (Sat, 25 Aug 2007) | 7 lines
Fix some issues with the handling of the scheduler in chan_iax2. Most of the
places that scheduled items to be executed by the scheduler thread did not
signal the scheduler thread to wake up so that it could recalculate the time
until the next action. These changes will make the scheduler thread more
responsive and ensure that actions get executed as close to when intended as
possible instead of it being possible for very long delays.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80898 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80849 | russell | 2007-08-24 16:22:50 -0500 (Fri, 24 Aug 2007) | 5 lines
If dnsmgr is in use, and no DNS servers are available when Asterisk first
starts, then don't give up on poking peers. Allow the poke to get rescheduled
so that it will work once the dnsmgr is able to resolve the host.
(closes issue #10521, patch by jamesgolovich)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80362 | russell | 2007-08-22 15:21:36 -0500 (Wed, 22 Aug 2007) | 34 lines
Merge changes from team/russell/iax_refcount.
This set of changes fixes problems with the handling of iax2_user and iax2_peer
objects. It was very possible for a thread to still hold a reference to one of
these objects while a reload operation tries to delete them. The fix here is to
ensure that all references to these objects are tracked so that they can't go away
while still in use.
To accomplish this, I used the astobj2 reference counted object model. This
code has been in one of Luigi Rizzo's branches for a long time and was primarily
developed by one of his students, Marta Carbone. I wanted to go ahead and bring
this in to 1.4 because there are other problems similar to the ones fixed by these
changes, so we might as well go ahead and use the new astobj if we're going to go
through all of the work necessary to fix the problems.
As a nice side benefit of these changes, peer and user handling got more efficient.
Using astobj2 lets us not hold the container lock for peers or users nearly as long
while iterating. Also, by changing a define at the top of chan_iax2.c, the objects
will be distributed in a hash table, drastically increasing lookup speed in these
containers, which will have a very big impact on systems that have a large number of
users or peers.
The use of the hash table will be made the default in trunk. It is not the default
in 1.4 because it changes the behavior slightly. Previously, since peers and users
were stored in memory in the same order they were specified in the configuration file,
you could influence peer and user matching order based on the order they are specified
in the configuration. The hash table does not guarantee any order in the container,
so this behavior will be going away. It just means that you have to be a little
more careful ensuring that peers and users are matched explicitly and not forcing
chan_iax2 to have to guess which user is the right one based on secret, host, and
access list settings, instead of simply using the username.
If you have any questions, feel free to ask on the asterisk-dev list.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79756 | russell | 2007-08-16 16:29:24 -0500 (Thu, 16 Aug 2007) | 11 lines
Fix more deadlocks in chan_iax2 that were introduced by making frame handling
and scheduling multi-threaded. Unfortunately, we have to do some expensive
deadlock avoidance when queueing frames on to the ast_channel owner of the IAX2
pvt struct. This was already handled for regular frames, but ast_queue_hangup
and ast_queue_control were still used directly. Making these changes introduced
even more places where the IAX2 pvt struct can disappear in the context of a
function holding its lock due to calling a function that has to unlock/lock it
to avoid deadlocks. I went through and fixed all of these places to account for
this possibility.
(issue #10362, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79276 | russell | 2007-08-13 15:18:30 -0500 (Mon, 13 Aug 2007) | 4 lines
Release the pvt lock before calling find_peer in register_verify to avoid a
deadlock. Also, remove some unnecessary locking in auth_fail that was only done
recursively.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79277 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79272 | russell | 2007-08-13 14:27:39 -0500 (Mon, 13 Aug 2007) | 9 lines
I am fighting deadlocks in chan_iax2. I have tracked them down to a single
core issue. You can not call find_callno() while holding a pvt lock as this
function has to lock another (every) other pvt lock. Doing so can lead to a
classic deadlock. So, I am tracking down all of the code paths where this
can happen and fixing them.
The fix I committed earlier today was along the same theme. This patch fixes
some code down the path of authenticate_reply.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79214 | russell | 2007-08-13 10:28:13 -0500 (Mon, 13 Aug 2007) | 4 lines
Fix a potential deadlock in socket_process. check_provisioning can eventually
call find_callno. You can't hold a pvt lock while calling find_callno because
it goes through and locks every single one looking for a match.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79174 | file | 2007-08-13 11:18:04 -0300 (Mon, 13 Aug 2007) | 4 lines
(closes issue #10437)
Reported by: haklin
Don't set the callerid name and number a second time on a newly created channel. ast_channel_alloc itself already sets it and setting it twice would cause a memory leak.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79175 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78063 | russell | 2007-08-03 12:01:07 -0500 (Fri, 03 Aug 2007) | 4 lines
Only pass through HOLD and UNHOLD control frames when the mohinterpret option
is set to "passthrough". This was pointed out by Kevin in the middle of a
training session.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78064 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r78028 | russell | 2007-08-02 21:04:22 -0500 (Thu, 02 Aug 2007) | 6 lines
Don't reuse the timespec that was set to 0 in the previous timedwait as it
will just return immediately. Also, fix some logic so the thread's lock
isn't unlocked twice in the weird case of dynamic threads getting acquired
right after a timeout.
(pointed out by SteveK)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@78029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77949 | russell | 2007-08-02 14:25:14 -0500 (Thu, 02 Aug 2007) | 5 lines
Fix the case where a dynamic thread times out waiting for something to do
during the first time it runs. This shouldn't ever happen, but we should
account for it anyway.
(pointed out by pete, who works with mihai)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77943 | russell | 2007-08-02 13:04:43 -0500 (Thu, 02 Aug 2007) | 9 lines
Fix another race condition in the handling of dynamic threads. If the dynamic
thread timed out waiting for something to do, but was acquired to perform an
action immediately afterwords, then wait on the condition again to give the
other thread a chance to finish setting up the data for what action this thread
should perform. Otherwise, if it immediately continues, it will perform the
wrong action.
(reported on IRC by mihai, patch by me)
(related to issue #10289)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77944 65c4cc65-6c06-0410-ace0-fbb531ad65f3
trunk version of find_idle_thread() where the old full frame processing
information was not cleared out. This would have caused full frames to get
deferred for processing by threads that weren't actually processing frames for
that call. Nice catch!!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77941 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77887 | russell | 2007-08-01 17:16:17 -0500 (Wed, 01 Aug 2007) | 23 lines
Fix some race conditions which have been causing weird problems in chan_iax2.
The most notable problem is that people have been seeing storms of VNAK frames
being sent due to really old frames mysteriously being in the retransmission
queue and never getting removed.
It was possible that a dynamic thread got created, but did not acquire its lock
before the thread that created it signals it to perform an action. When this
happens, the thread will sleep until it hits a timeout, and then get destroyed.
So, the action never gets performed and in some cases, means a frame doesn't
get transmitted and never gets freed since the scheduler never gets a chance
to reschedule transmission.
Another less severe race condition is in the handling of a timeout for a dynamic
thread. It was possible for it to be acquired to perform at action at the same
time that it hit a timeout. When this occurs, whatever action it was acquired
for would never get performed.
(patch contributed by Mihai and SteveK)
(closes issue #10289)
(closes issue #10248)
(closes issue #10232)
(possibly related to issue #10359)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77889 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77794 | russell | 2007-07-30 15:16:43 -0500 (Mon, 30 Jul 2007) | 8 lines
Fix an issue that could potentially cause corruption of the global iax frame
queue. In the network_thread() loop, it traverses the list using the
AST_LIST_TRAVERSE_SAFE macro. However, to remove an element of the list within
this loop, it used AST_LIST_REMOVE, instead of AST_LIST_REMOVE_CURRENT, which I
believe could leave some of the internal variables of the SAFE macro invalid.
Mihai says that he already made this change in his local copy and it didn't help
his VNAK storm issues, but I still think it's wrong. :)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77797 65c4cc65-6c06-0410-ace0-fbb531ad65f3
At first sight (but the function is very large so i am not 100% sure)
the code seems correct, so maybe my compiler is just not smart
enough to figure that out at the optimization level it has.
Not worthwhile merging to 1.4 i believe.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77156 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r76485 | russell | 2007-07-23 07:25:01 -0500 (Mon, 23 Jul 2007) | 6 lines
Use a signed integer for storing the number of bytes in the packet read from
the network. Using an unsigned value here made it impossible to handle an
error returned from recvfrom(). Furthermore, in the case that recvfrom()
did return an error, this would cause a crash due to a heap overflow.
(closes issue #10265, reported by and fix suggested by timrobbins)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76486 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r75928 | russell | 2007-07-19 10:53:15 -0500 (Thu, 19 Jul 2007) | 14 lines
Merged revisions 75927 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r75927 | russell | 2007-07-19 10:49:42 -0500 (Thu, 19 Jul 2007) | 6 lines
When processing full frames, take sequence number wraparound into account when
deciding whether or not we need to request retransmissions by sending a VNAK.
This code could cause VNAKs to be sent erroneously in some cases, and to not
be sent in other cases when it should have been.
(closes issue #10237, reported and patched by mihai)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75929 65c4cc65-6c06-0410-ace0-fbb531ad65f3
list were not destroyed when the module is unloaded. However, after reading
the code related to the use of this list a lot today, I realized that it isn't
necessary. So, I have added a comment to explain why it isn't necessary.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75806 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r75759 | russell | 2007-07-18 16:09:46 -0500 (Wed, 18 Jul 2007) | 13 lines
Merged revisions 75757 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r75757 | russell | 2007-07-18 16:09:13 -0500 (Wed, 18 Jul 2007) | 5 lines
When traversing the queue of frames for possible retransmission after
receiving a VNAK, handle sequence number wraparound so that all frames that
should be retransmitted actually do get retransmitted.
(issue #10227, reported and patched by mihai)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75761 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r75445 | russell | 2007-07-17 15:48:21 -0500 (Tue, 17 Jul 2007) | 13 lines
Merged revisions 75444 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r75444 | russell | 2007-07-17 15:45:27 -0500 (Tue, 17 Jul 2007) | 5 lines
Ensure that when encoding the contents of an ast_frame into an iax_frame, that
the size of the destination buffer is known in the iax_frame so that code
won't write past the end of the allocated buffer when sending outgoing frames.
(ASA-2007-014)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75446 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r74767 | russell | 2007-07-11 17:57:07 -0500 (Wed, 11 Jul 2007) | 13 lines
Merged revisions 74766 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r74766 | russell | 2007-07-11 17:53:26 -0500 (Wed, 11 Jul 2007) | 5 lines
The function make_trunk() can fail and return -1 instead of a valid new call
number. Fix the uses of this function to handle this instead of treating it
as the new call number. This would cause a deadlock and memory corruption.
(possible cause of issue #9614 and others, patch by me)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@74769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Tilghman Lesher
Russell Bryant
Brett Bryant
Michiel van Baak
Joshua Colp
Mark Michelson
Kevin P. Fleming
Jeff Peeler
Terry Wilson
Steve Murphy
Olle Johansson
Jason Parker
Luigi Rizzo
Dwayne M. Hubbard