Behaviour now is that general codec config flows to default_line and default_device. [devices] stuff amends default_device and similar for [lines]. These are copied to individual device and line as they are created.
Added confcapability and confprefs for the configured stuff which doesn't change as device and so on are connected. prefs are based on line prefs if they exist, else the device prefs are used (prefs identifies codec order).
(closes issue #13806)
Reported by: pj
Patches:
codecs.diff uploaded by wedhorn (license 30)
Tested by: pj and me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163448 | russell | 2008-12-12 07:44:08 -0600 (Fri, 12 Dec 2008) | 26 lines
Resolve issues that could cause DTMF to be processed out of order.
These changes come from team/russell/issue_12658
1) Change autoservice to put digits on the head of the channel's frame readq
instead of the tail. If there were frames on the readq that autoservice
had not yet read, the previous code would have resulted in out of order
processing. This required a new API call to queue a frame to the head
of the queue instead of the tail.
2) Change up the processing of DTMF in ast_read(). Some of the problems
were the result of having two sources of pending DTMF frames. There
was the dtmfq and the more generic readq. Both were used for pending
DTMF in various scenarios. Simplifying things to only use the frame
readq avoids some of the problems.
3) Fix a bug where a DTMF END frame could get passed through when it
shouldn't have. If code set END_DTMF_ONLY in the middle of digit emulation,
and a digit arrived before emulation was complete, digits would get
processed out of order.
(closes issue #12658)
Reported by: dimas
Tested by: russell, file
Review: http://reviewboard.digium.com/r/85/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163383 | tilghman | 2008-12-11 17:35:55 -0600 (Thu, 11 Dec 2008) | 9 lines
When a Ctrl-C or Ctrl-D ends a remote console, on certain shells, the terminal
is messed up. By intercepting those events with a signal handler in the remote
console, we can avoid those issues.
(closes issue #13464)
Reported by: tzafrir
Patches:
20081110__bug13464.diff.txt uploaded by Corydon76 (license 14)
Tested by: blitzrage
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163253 | russell | 2008-12-11 15:46:29 -0600 (Thu, 11 Dec 2008) | 8 lines
Fix some observed slowdowns in dialplan processing.
The change is to remove autoservice usage from dialplan functions that do not
need it because they do not perform operations that potentially block.
(closes issue #13940)
Reported by: tbelder
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163254 65c4cc65-6c06-0410-ace0-fbb531ad65f3
is used while continuous mode was already turned on.
(closes issue #13738)
Reported by: smurfix
Patches:
res.patch.fixed uploaded by smurfix (license 547)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The conversion to use ast_check_hangup() everywhere instead of checking the softhangup
flag directly introduced this problem. The issue is that ast_check_hangup() checked
for tech_pvt to be NULL. Unfortunately, this will be NULL is some valid circumstances,
such as with a dummy channel.
The fix is simple. Don't check tech_pvt. It's pointless, because the code path that
sets this to NULL is when the channel hangup callback gets called. This happens inside
of ast_hangup(), which is the same function responsible for freeing the channel. Any
code calling ast_check_hangup() better not be calling it after that point, and if so,
we have a bigger problem at hand.
(closes issue #14035)
Reported by: erogoza
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163092 | russell | 2008-12-11 10:54:51 -0600 (Thu, 11 Dec 2008) | 11 lines
Fix an issue that made it so you could only have a single caller executing
a custom feature at a time. This was especially problematic when custom
features ran for any appreciable amount of time.
The fix turned out to be quite simple. The dynamic features are now stored
in a read/write list instead of a list using a mutex.
(closes issue #13478)
Reported by: neutrino88
Fix suggested by file
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163094 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163080 | mmichelson | 2008-12-11 10:24:43 -0600 (Thu, 11 Dec 2008) | 14 lines
Fix a potential crash due to unsafe datastore handling.
This patch also contains a conversion from using long to time_t
for representing times for a queue, as well as some whitespace
fixes.
(closes issue #14060)
Reported by: nivek
Patches:
datastore_fixup.patch.corrected uploaded by nivek (license 636)
with slight modification from me
Tested by: nivek
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163081 65c4cc65-6c06-0410-ace0-fbb531ad65f3
channel variables, and in any case, was redundant;
pbx_substitute_variables_helper ALREADY does substitution for global
variables.
(closes issue #13327)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162922 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162874 | jpeeler | 2008-12-10 16:04:18 -0600 (Wed, 10 Dec 2008) | 5 lines
(closes issue #13229)
Reported by: clegall_proformatique
Ensure that moh_generate does not return prematurely before local_ast_moh_stop is called. Also, the sleep in mp3_spawn now only occurs for http locations since it seems to have been added originally only for failing media streams.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162891 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162804 | file | 2008-12-10 15:01:17 -0400 (Wed, 10 Dec 2008) | 6 lines
Fix subscription based MWI up a bit. We only want to put sip: at the beginning of the URI if it is not already there and revert code to ignore destination check if subscribing for MWI.
(closes issue #12560)
Reported by: vsauer
Patches:
patch001.diff uploaded by ramonpeek (license 266)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162805 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162738 | file | 2008-12-10 13:50:43 -0400 (Wed, 10 Dec 2008) | 6 lines
When a SIP peer unregisters set the expiry time back to 0 so that the 200 OK contains an expires of 0.
(closes issue #13599)
Reported by: hjourdain
Patches:
chan_sip.c.diff uploaded by hjourdain (license 583)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162739 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r162671 | murf | 2008-12-10 09:45:01 -0700 (Wed, 10 Dec 2008) | 22 lines
(closes issue #14022)
Reported by: wetwired
Tested by: murf
I checked, and I added a mod to the trunk version
of Asterisk that would make it 8-bit transparent
on 27 Nov 2007, but I made no such updates to
1.4. My best guess is that 1.4 was released, and
it was not appropriate to commit an enhancement.
But I'm going to add the same fixes to 1.4 now,
for the following reasons:
1. wetwired is correct; 1.4 is **mostly** 8-bit
transparent now. This is because the lexical
token forming rules use . in most 'word'
state continuances. It's just the beginning
of a 'word' that is picky.
2. Accepting 8-bit chars in some places and
not others leads to bug reports like this.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r162670 | mmichelson | 2008-12-10 10:44:37 -0600 (Wed, 10 Dec 2008) | 14 lines
Update to stringfield handling so that side-effects on
parameters are not evaluated multiple times.
An example where this caused a problem was in chan_sip.c, with
the line
ast_string_field_set(p, fromdomain, ++fromdomain);
This patch was originally uploaded to issue #13783 by
jamessan. While the issue was closed for other reasons, this
patch is valid and fixes a separate problem, and is thus
being committed.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162653 | file | 2008-12-10 12:05:29 -0400 (Wed, 10 Dec 2008) | 6 lines
Increment the sequence number on the end packets for RFC2833. After reading the RFC some more and doing some testing I agree with this change.
(closes issue #12983)
Reported by: vt
Patches:
dtmf_inc_seqnum_on_end_pkts.diff uploaded by vt (license 520)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After the nightly update of the documentation on asterisk.org, I'll post
an update to asterisk-dev with a pointer to the changes. This covers some
release branch and commit policy information. None of this should be a
surprise, since it's just documenting what we have already been doing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162413 | russell | 2008-12-09 16:17:39 -0600 (Tue, 09 Dec 2008) | 8 lines
Remove the test_for_thread_safety() function completely.
The test is not valid. Besides, if we actually suspected that recursive
mutexes were not working, we would get a ton of LOG_ERROR messages when
DEBUG_THREADS is turned on.
(inspired by a discussion on the asterisk-dev list)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162286 | russell | 2008-12-09 14:57:35 -0600 (Tue, 09 Dec 2008) | 9 lines
Fix an issue where callers on an incoming call on an SLA trunk would not hear ringback.
We need to make sure that we don't start writing audio to the trunk channel until we're
actually ready to answer it. Otherwise, the channel driver will treat it as inband
progress, even though all they are getting is silence.
(closes issue #12471)
Reported by: mthomasslo
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162291 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162264 | murf | 2008-12-09 13:20:54 -0700 (Tue, 09 Dec 2008) | 1 line
In discussion with seanbright on #asterisk-dev, I have added a default rule, and an option to suppress the default rule from being generated in the flex output, for the sake of those OS's where they didn't tweak flex's ECHO macro, and the compiler doesn't like it. The regressions are OK with this.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162271 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162265 | mmichelson | 2008-12-09 14:28:44 -0600 (Tue, 09 Dec 2008) | 6 lines
If we fail to start a thread for the pbx to run in, we need to
be sure to decrease the number of active calls on the system.
This fix may relate to ABE-1713, but it is not certain yet.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162204 | file | 2008-12-09 15:47:07 -0400 (Tue, 09 Dec 2008) | 7 lines
Make sure that the timestamp for DTMF is not the same as the previous voice frame and do not send audio when transmitting DTMF as this confuses some equipment.
(closes issue #13209)
Reported by: ip-rob
Patches:
13209.diff uploaded by file (license 11)
Tested by: ip-rob, bujones
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162205 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r162071 | tilghman | 2008-12-09 11:07:50 -0600 (Tue, 09 Dec 2008) | 3 lines
For some reason, after a distclean, gcc started returning
'value computed is not used'. Fixing (for --enable-dev-mode).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162203 65c4cc65-6c06-0410-ace0-fbb531ad65f3