https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181655 | file | 2009-03-12 13:29:19 -0300 (Thu, 12 Mar 2009) | 10 lines
Fix issue with streaming MOH failing if nobody is listening.
When a music class is setup to actually provide music on hold
from a stream we need to constantly read audio from it since it
will constantly be providing audio. This is now done despite there
being no channels listening to it.
(closes issue #14416)
Reported by: caspy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181423 | russell | 2009-03-11 16:42:58 -0500 (Wed, 11 Mar 2009) | 9 lines
Make code that updates BRIDGEPEER variable thread-safe.
It is not safe to read the name field of an ast_channel without the channel
locked. This patch fixes some places in channel.c where this was being done,
and lead to crashes related to masquerades.
(closes issue #14623)
Reported by: guillecabeza
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181340 | dvossel | 2009-03-11 12:25:31 -0500 (Wed, 11 Mar 2009) | 11 lines
encrypted IAX2 during packet loss causes decryption to fail on retransmitted frames
If an iax channel is encrypted, and a retransmit frame is sent, that packet's iseqno is updated while it is encrypted. This causes the entire frame to be corrupted. When the corrupted frame is sent, the other side decrypts it and sends a VNAK back because the decrypted frame doesn't make any sense. When we get the VNAK, we look through the sent queue and send the same corrupted frame causing a loop. To fix this, encrypted frames requiring retransmission are decrypted, updated, then re-encrypted. Since key-rotation may change the key held by the pvt struct, the keys used for encryption/decryption are held within the iax_frame to guarantee they remain correct.
(closes issue #14607)
Reported by: stevenla
Tested by: dvossel
Review: http://reviewboard.digium.com/r/192/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181371 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181328 | file | 2009-03-11 14:22:52 -0300 (Wed, 11 Mar 2009) | 14 lines
Fix issue where an attended transfer could not be completed under a rare scenario.
When completing an attended transfer chan_sip does a check to make sure the extension
in the URI portion of the Refer-To header is a local valid extension. We don't actually
need to check this since we know for sure the other channel is already up and talking to
the extension. Some devices do not put the extension in the Refer-To header either, which
can cause the extension check to fail. We now no longer do this check if it is an attended
transfer.
(closes issue #14628)
Reported by: sverre
Patches:
14628.diff uploaded by file (license 11)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181345 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181295 | file | 2009-03-11 13:36:50 -0300 (Wed, 11 Mar 2009) | 9 lines
Fix a problem with inband DTMF detection on outgoing SIP calls when dtmfmode=auto.
When dtmfmode was set to auto the inband DTMF detector was not setup
on outgoing SIP calls. This caused inband DTMF detection to fail.
The inband DTMF detector is now setup for both dtmfmode inband and auto.
(closes issue #13713)
Reported by: makoto
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If trying to dial a non-existent queue, there would
be a segfault when attempting to access q->weight, even
though q was NULL. This problem was introduced during
the queue-reset merge and thus only affects trunk.
(closes issue #14643)
Reported by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The main problem here was that cstdlib was undefining free thereby causing the
proper debug macros to not be used. ast_h323.cxx has been changed to call
ast_free instead to avoid the issue.
A few other issues were addressed:
- There were a few instances of functions improperly passing ast_free instead
of ast_free_ptr.
- Some clean up was done to avoid the debug macros intentionally being redefined.
(copied below from Kevin's commit, appreciate the help)
- disable astmm.h from doing anything when STANDALONE is defined, which is used
by the tools in the utils/ directory that use parts of Asterisk header files in
hackish ways; also ensure that utils/extconf.c and utils/conf2ael.c are
compiled with STANDALONE defined.
(closes issue #13593)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r181133 | jpeeler | 2009-03-10 22:25:04 -0500 (Tue, 10 Mar 2009) | 13 lines
Fix malloc debug macros to work properly with h323.
The main problem here was that cstdlib was undefining free thereby causing the
proper debug macros to not be used. ast_h323.cxx has been changed to call
ast_free instead to avoid the issue. Because using the ast prefix calls are
a better choice, ast_free_ptr is the new wrapper for free to pass to functions.
Also, a little bit of clean up was done to avoid the debug macros intentionally
being redefined.
(closes issue #13593)
Reported by: pj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181134 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(actually its $(localstatedir)/run/asterisk
Makes setups with asterisk as non-root easier to manage because you can
setup permissions on this dir instead of touching a file and setting
permissions on that.
Files that come to mind are asterisk.pid and asterisk.ctl socket.
Prodded by and ok @russell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180898 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Copied from my review board description:
This is a continuation of the API changes documentation started for describing
changes between releases. Most of the API changes were pretty simple needing
only to be brought to attention via the new "Asterisk API Changes" list.
However, if you see anything that needs further explanation feel free to
supplement what is there. The current method of documenting is to add (in the
header file): \version <ver number> <description of changes> and then to add
the function to the change list in doxyref.h on the AstAPIChanges page. I also
made sure all the functions that were newly added were tagged with \since
1.6.1. I think this is a good habit to start both for the historical aspect as
well as for the future ability to easily add a "New Asterisk API" page.
Review: http://reviewboard.digium.com/r/190/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180719 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r180532 | dvossel | 2009-03-06 11:19:55 -0600 (Fri, 06 Mar 2009) | 9 lines
Fix handling of backreferences for ENUM lookups
enum.c did not handle regex backtraces correctly. The '\1' in the regex is a backreference that requires a pattern match to be inserted. The way the code used to work is that it would find the backreference and insert the entire input string minus the '+'. This is incorrect. The regexec() function takes in a variable called pmatch which is an array of structs containing the start and end indexes for each backreference substring. The original code actually passed the pmatch array pointer into regexec but never did anything with it. Now when a backtrace is found, the backtrace number is looked up in the pmatch array and the correct substring is inserted.
(closes issue #14576)
Reported by: chris-mac
Review: http://reviewboard.digium.com/r/187/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r180464 | mmichelson | 2009-03-05 17:26:11 -0600 (Thu, 05 Mar 2009) | 16 lines
[IMAP] Fix message retrieval issues when identical mailbox names were defined in separate contexts.
There was a fix put in a while back so that an X-Asterisk-VM-Context message header was
added to stored IMAP voicemails. This would allow for us to differentiate if the same
mailbox name was used in multiple contexts. The problem still left was that not all places
where messages were retrieved actually attempted to use this header for information when
retrieving messages. This commit fixes that so that MWI and message retrieval from VoiceMailMain
work as expected.
(closes issue #13853)
Reported by: vicks1
Patches:
13853_v2.patch uploaded by mmichelson (license 60)
Tested by: lmadsen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180465 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r180380 | mmichelson | 2009-03-05 12:58:48 -0600 (Thu, 05 Mar 2009) | 25 lines
Fix broken mailbox parsing when searchcontexts option is enabled.
When using the searchcontexts option in voicemail.conf, the code
made the assumption that all mailbox names defined were unique across
all contexts. However, the code did nothing to actually enforce this
assumption, nor did it do anything to alert a user that he may have
created an ambiguity in his voicemail.conf file by defining the same
mailbox name in multiple contexts.
With this change, we now will issue a nice long warning if searchcontexts
is on and we encounter the same mailbox name in multiple contexts and ignore
any duplicates after the first box. Whether searchcontexts is enabled or not,
if we come across a duplicate mailbox in the same context, then we will issue
a warning and ignore the duplicated mailbox. I have also added a small note
to voicemail.conf.sample in the explanation for searchcontexts explaining
that you cannot define the same mailbox in multiple contexts if you have
enabled the option.
(closes issue #14599)
Reported by: lmadsen
Patches:
14599.patch uploaded by mmichelson (license 60) (with slight modification)
Tested by: lmadsen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180383 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r180372 | kpfleming | 2009-03-05 12:22:16 -0600 (Thu, 05 Mar 2009) | 9 lines
Fix problems when RTP packet frame size is changed
During some code analysis, I found that calling ast_rtp_codec_setpref() on an ast_rtp session does not work as expected; it does not adjust the smoother that may on the RTP session, in fact it summarily drops it, even if it has data in it, even if the current format's framing size has not changed. This is not good.
This patch changes this behavior, so that if the packetization size for the current format changes, any existing smoother is safely updated to use the new size, and if no smoother was present, one is created. A new API call for smoothers, ast_smoother_reconfigure(), was required to implement these changes.
Review: http://reviewboard.digium.com/r/184/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180373 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit brings in the bridging core, bridging technologies,
and the ConfBridge application.
For usage information on the ConfBridge application please see
the output of "core show application ConfBridge" from the CLI.
For API documentation please see the doxygen page describing the
architecture and the documentation for each API call.
Review: http://reviewboard.digium.com/r/93/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180369 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, chan_sip had both sip_peer and sip_user objects in memory. A
patch went in to remove sip_user to simplify the code, since everything
could be done with just sip_peer. This patch resolves some regressions
found that were introduced by those changes.
This code comes from svn/asterisk/team/group/sip-object-matching/.
Here is a list of the changes that have been made:
1) When doing a match by name with the find_peer() function, make it much
easier to specify which objects should be matched by having a parameter
that specifies exactly which object types should be considered. Also,
update find_by_name() to handle this parameter. Finally, update all
code to use the new option values.
2) When looking up an object for an outbound request by name, consider
peers only. (create_addr())
3) Only match peers on an incoming registration request.
4) When doing authentication (except for SUBSCRIBE), look up users
by name, instead of all objects by name.
5) When doing authentication (except for SUBSCRIBE), after looking for
a user by name, look for a peer by IP address, instead of all objects
by IP address.
6) When handling the SIP qualify CLI command or manager action, look for
a peer by name, instead of any object by name.
7) When handling the SIP unregister CLI command, look for a peer by name,
instead of any object by name.
9) In sip_do_debug_peer(), search for a peer by name, instead of any object
by name.
9) When handling the SIPPEER() dialplan function, search for a peer by name,
instead of any object by name.
10) In the following session timer related functions, st_get_se(),
st_get_refresher(), and st_get_mode(), when looking for an object for a
given sip_pvt using pvt->peername, look for a peer by name, instead of any
object by name.
11) Fix build_peer() to properly handle the case where separate type=peer and
type=user entries were specified in sip.conf.
(closes issue #14505)
Reported by: lmadsen
Review: http://reviewboard.digium.com/r/172/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the subscription context for a call pickup subscription differs
from the context of the call pickup target, there's not an easy way
to divine what context should be used for the pickup. The way to work
around this is to use PICKUPMARK as the context for the pickup.
This has been documented in the sip.conf.sample file
(ABE-1708)
closes issue #14567
submitted by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180155 65c4cc65-6c06-0410-ace0-fbb531ad65f3