The failing assertion ensures that the final snapshot gets generated so
CDR records can get finalized. The only place where a channel staging
snapshot flag could be left set is in chan_sip.c:handle_request_bye().
The function could return before clearing the flag because the channel
could dissappear while the function had to have the channel unlocked.
* Fixed handle_request_bye() channel snapshot staging coverage area to not
have a return in the middle of it and be unable to clear the staging flag.
* Pushed the channel snapshot staging coverage area into
ast_rtp_instance_set_stats_vars() to ensure that the staging is not
interrutped.
* Made callers of ast_rtp_instance_set_stats_vars() not call it with any
channels or channel driver private locks held to eliminate the deadlock
potential. The callers must hold references to the passed in channel and
rtp objects.
* Eliminated sip_hangup() trying to get the bridge peer. It is futile at
this point because the channel could never be in a bridge.
Review: https://reviewboard.asterisk.org/r/3431/
........
Merged revisions 412385 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
(5) The old refcounter implementation in utils/ has been removed.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412115 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412153 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
* Removed ast_internal_timing_enabled(), AST_OPT_FLAG_INTERNAL_TIMING, and
ast_opt_internal_timing.
ASTERISK-22846 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3414/
........
Merged revisions 411715 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411716 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 411717 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Assert if a channel is destroyed but has the snapshot staging flag set.
In this case the final channel destruction snapshot would never get taken.
* Assert if what we just got out of the stasis cache is not what we were
looking for. This assert would have saved several days searching for a
bug and a lot of my hair.
* Assert if the music on hold message posts could not find the associated
channel. A crash will happen later when manager tries to send the MOH AMI
message. This assert catches the problem when the stasis message is
posted instead of by the thread processing the defective message.
* Always generate a backtrace when an ast_assert() fails.
Review: https://reviewboard.asterisk.org/r/3411/
........
Merged revisions 411701 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411702 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a response has a content length of 0, fwrite would be called to write a
buffer with no data in it. This resulted in the following classic error
message:
[Apr 3 11:49:17] ERROR[26421] http.c: fwrite() failed: Success
This patch makes it so that we only attempt to write out the content if the
calculated content_length is non-zero.
........
Merged revisions 411687 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit contains several changes to sorcery:
1) Application of sorcery configuration based on module name is automatically performed
when sorcery is opened for a module.
2) Sorcery will not attempt to apply the same wizard to an object type more than once.
3) Sorcery gives more exact results when attempting to apply a wizard, whether as the
default or based on configuration.
Sorcery unit tests still pass for me after making these changes.
Review: https://reviewboard.asterisk.org/r/3326
........
Merged revisions 411159 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch works around a problem with the HTTP body
being dropped from the response to a specific client
and under specific circumstances:
a) Client request comes from node.js user agent
"Shred" via use of swagger-client library.
b) Asterisk and Client are *not* on the same
host or TCP/IP stack
In testing this problem, it has been determined that
the write of the HTTP body is lost, even if the data
is written using low level write function. The only
solution found is to instruct the TCP stack with the
shutdown function to flush the last write and finish
the transmission. See review for more details.
ASTERISK-23548 #close
(closes issue ASTERISK-23548)
Reported by: Sam Galarneau
Review: https://reviewboard.asterisk.org/r/3402/
........
Merged revisions 411462 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411463 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 411465 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On graceful shutdown, sorcery wizards are all killed off, but it is
possible for sorcery instances to still have dangling pointers after
this, possibly causing a crash. Giving the sorcery instances a reference
to their wizards ensures that the wizard reference will remain valid for
the lifetime of the sorcery instance.
Review: https://reviewboard.asterisk.org/r/3401
........
Merged revisions 411295 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix memory leak in ast_unreal_new_channels(). Made it generate the ;2
uniqueid on a stack variable instead of mallocing it.
* Made send error response to ARI and AMI requests instead of just logging
excessive uniqueid length and allowing truncation. action_originate() and
ari_channels_handle_originate_with_id().
* Fixed minor truncating uniqueid hole when generating the ;2 uniqueid
string length. Created public and internal lengths of uniqueid. The
internal length can handle a max public uniqueid plus an appended ;2.
* free() and ast_free() are NULL tolerant so they don't need a NULL test
before calling.
* Made use better struct initialization format instead of the position
dependent initialization format. Also anything not explicitly initialized
in the struct is initialized to zero by the compiler.
* Made ast_channel_internal_set_fake_ids() use the safer
ast_copy_string() instead of strncpy().
Review: https://reviewboard.asterisk.org/r/3371/
........
Merged revisions 410949 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a request was received with a Content-type of json,
the body was sent for json parsing - even if it was zero
length. This resulted in ARI requests failing that were
valid, such as a channel DELETE with no parameters. The
code has now been changed to skip json parsing with zero
content length.
(closes issue SWP-6748)
Reported by: Samuel Galarneau
Review: https://reviewboard.asterisk.org/r/3360/
........
Merged revisions 410858 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410863 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the CDR core, every channel should either be filtered out (due to being an
'internal' channel used as an implementation detail, such as playing media
back into a bridge) or it should get a CDR. Even if that CDR ends up being
discarded, we still give the channel a CDR in case we end up needing it. If we
hit a situation where a channel does not have a CDR, we should blow up in
-dev-mode. Asserts are appropriate for that.
This patch adds those asserts, as they would have quickly caught the error
fixed by r410814.
........
Merged revisions 410861 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410862 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change enables DNS client support within PJSIP. System
nameservers are automatically discovered using res_init or
res_ninit. If this fails then PJSIP will resort to using
gethostbyname for resolution.
By enabling this support we gain SRV support, failover, and
weight support.
(closes issue ASTERISK-23435)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3343/
........
Merged revisions 410795 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410796 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Callerid checksum-ing was being handled incorrectly here. When the checksum is
calculated to be 0x00, it will perform 0x100-0x00 which results in 0x100. This
value will then fail the otherwise correct callerid message.
This patch changes the logic to simply add the calculated checksum to the
transmitted 2's compliment checksum.
Review: https://reviewboard.asterisk.org/r/3356/
(closes issue ASTERISK-23488)
........
This is a merge of merged revisions 410750 410747 from http://svn.asterisk.org/svn/asterisk/branches/12
I didn't want a broken patch to be comitted to trunk so I pre-merge merged them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410775 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Playing back a file to a channel in an ARI bridge would attempt to wait until
the playback concluded before returning. The method used involved signaling the
waiting thread in the ARI custom playback function.
The problem with this is that there were some corner cases that were not accounted for:
* If a bridge channel could not be found, then we never would attempt the playback but
would still attempt to wait for the playback to complete.
* If the bridge playfile action failed to queue, we would still attempt to wait for the
playback to complete.
* If the bridge playfile action were queued but some circumstance caused the playback
not to occur (the bridge dies, the channel is removed from the bridge), then we would
never be notified.
The solution to this is to move the waiting logic into the bridge code. A new bridge
API function is added to queue a synchronous action on a bridge. The waiting thread
is notified when the queued frame has been freed, either due to an error occurring
or due to successful playback. As a failsafe, the waiting thread has a 10 minute
timeout just in case there is a frame leak somewhere.
Review: https://reviewboard.asterisk.org/r/3338
........
Merged revisions 410673 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Realtime backends' update and store callbacks return the number of rows affected,
or -1 if there was a failure. There were a couple of issues:
* The config API was treating 0 as a successful return, and positive values as
a failure. Now the config API treats anything >= 0 as a success.
* res_sorcery_realtime was treating 0 as a successful return from the store
procedure, and any positive values as a failure. Now sorcery treats anything
> 0 as a success. It still considers 0 a "failure" since there is no change
to report to observers.
Review: https://reviewboard.asterisk.org/r/3341
........
Merged revisions 410592 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The syncing thread sleeps for a second before waiting to be
told to attempt to sync again. If a signal were sent during this
sleeping period, we would end up having to wait until the next
sync signal occurred in order to sync up the astdb.
This code rearrangement also ensures that any pending transactions
will be synced prior to Asterisk shutting down.
Patches: db_sync.patch by John Hardin (License #6512)
........
Merged revisions 410556 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 410559 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made res_musiconhold.c always post the MusicOnHoldStart/MusicOnHoldStop
events when it actually starts/stops the music streams. This allows the
events to always happen when MOH starts/stops. The event posting code was
moved to the MOH alloc/release routines.
* Made channel_do_masquerade() stop any MOH on the original channel before
masquerading so the original channel will get a stop event with correct
information.
* Cleaned up a couple odd codings in moh_files_alloc() and moh_alloc()
dealing with the music state variable.
(issue ASTERISK-23311)
Reported by: Benjamin Keith Ford
Review: https://reviewboard.asterisk.org/r/3306/
........
Merged revisions 410493 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410494 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created the 'pjsip show channel' and 'pjsip show contact' commands.
Refactored out the hated ast_hashtab. Replaced with ao2_container.
Cleaned up function naming. Internal only, no public name changes.
Cleaned up whitespace and brace formatting in cli code.
Changed some NULL checking from "if"s to ast_asserts.
Fixed some register/unregister ordering to reduce deadlock potential.
Fixed ast_sip_location_add_contact where the 'name' buffer was too short.
Fixed some self-assignment issues in res_pjsip_outbound_registration.
(closes issue ASTERISK-23276)
Review: http://reviewboard.asterisk.org/r/3283/
........
Merged revisions 410287 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The config option help information has always parsed the <see-also> tags in the
XML documentation. Unfortunately, it just never bothered displaying them on
the CLI. With this patch, when you execute 'config show help [module] [obj]
[option]', it will display what other options are useful to you.
(closes issue ASTERISK-22008)
Reported by: Richard Mudgett
........
Merged revisions 410209 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410210 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to prevent confusion over the allow and disallow
list of codecs being the same an option for registering a
field as an alias is added. The alias field will be read
from the configuration file, but afterwards is not listed
as a known field. With disallow set as an alias, the CLI
command pjsip show endpoint # will list the allow= field,
but not the disallow field.
(closes issue ASTERISK-23092)
Review: https://reviewboard.asterisk.org/r/3193/
........
Merged revisions 410190 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A stasis cache entry now contains more than a single message/snapshot. It
contains messages/snapshots for the local entity as well as any remote
entities that post to the cached item. In addition callbacks can be
supplied when the cache is created to compute and post the aggregate
message/snapshot representing all entities stored in the cache entry.
* All stasis messages now have an eid to indicate what entity posted it.
* The stasis cache enhancements allow device state to cache and aggregate
the device states from local and remote entities in a single operation.
The cached aggregate device state is available immediately after it is
posted to the stasis bus. This improves performance by eliminating a
cache dump and associated ao2 container traversals to calculate the
aggregate state.
(closes issue ASTERISK-23204)
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3281/
........
Merged revisions 410184 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410185 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch creates the AST_SORCERY dialplan function which allows someone to
retrieve any value from a sorcery-based config file. It's similar to
AST_CONFIG.
The creation of the function itself was fairly straightforward but it required
changes to the underlying sorcery infrastructure that rippled into individual
sorcery objects. The changes stemmed from inconsistencies in how sorcery
created ast_variable objectsets from sorcery objects and the inconsistency
in how individual objects used that feature especially when it came to
parameters that can be specified multiple times like contact in aor and match
in identify. You can read more here...
http://lists.digium.com/pipermail/asterisk-dev/2014-February/065202.html
So, what this patch does, besides actually creating the AST_SORCERY function,
is the following...
* Creates ast_variable_list_append which is a helper to append one ast_variable
list to another.
* Modifies the ast_sorcery_object_field_register functions to accept the
already-defined sorcery_fields_handler callback.
* Modifies ast_sorcery_objectset_create to accept a parameter indicating return
type preference...a single ast_variable with all values concatenated or an
ast_variable list with multiple entries. Also fixed a few bugs.
* Modifies individual sorcery object implementations to use the new function
definition of the ast_sorcery_object_field_register functions.
* Modifies location.c and res_pjsip_endpoint_identifier_ip.c to implement
sorcery_fields_handler handlers so they return multiple occurrences as an
ast_variable_list.
* Added a whole bunch of tests to test_sorcery.
(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3254/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Transport TOS values were interpreted as DSCP values without being documented
as such. Endpoint TOS values (tos_audio/tos_video) behaved normally as TOS
values have historically. This patch makes the transport TOS values behave as
TOS values and makes all TOS values readable as string values (e.g. AF11).
In addition, alembic scripts have been updated to use the proper field types
for all TOS/COS values.
(issue ASTERISK-23235)
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3304/
........
Merged revisions 410028 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove some unnecessary RAII_VAR() usage.
* Made the struct stasis_subscription ao2 object use the ao2 lock instead
of a redundant join_lock in the struct for ast_cond_wait().
* Removed locks on some ao2 objects that don't need the lock.
* Made the topic pool entries container use the ao2 template functions.
* Add some missing allocation failure checks.
* Add missing cleanup in off nominal path of dispatch_message().
........
Merged revisions 409270 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@409271 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is possible to pre-load pbx_config. As a result, pbx_config - which will
load and parse the dialplan - will attempt to use various dialplan components,
such as device state providers and presence state providers, prior to them
being initialized by the core. This would lead to a crash, as the components
had not created their Stasis cache entries.
This patch moves a number of core component initializations before the module
pre-load. This guarantees that if someone does pre-load pbx_config - or other
pbx modules - that the Stasis caches for the various core components are
created.
(closes issue ASTERISK-23320)
Reported by: xrobau
(closes issue ASTERISK-23265)
Reported by: Andrew Nagy
Tested by: Andrew Nagy, Rusty Newton
........
Merged revisions 408855 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408859 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk didn't support the dynamic payload change in rtp mapping in the 200
OK response.
Scenario:
Asterisk sends the INVITE proposing alaw and telephone-event, it proposes
rtpmap:101 for telephone-event. Peer responds with 2xx, it answers with
alaw and telephone-event also, but it proposes a different rtpmap number
(rtpmap:103) for telephone-event.
Expected Behaviour:
Asterisk should honour the rtpmapping in the response and send DTMF packets
using 103 as payload type for DTMF.
Actual Behaviour: Asterisk sends DTMF packets using payload type 101.
With this patch asterisk now supports changes that can occur in the rtp mapping
in the response.
(closes issue ASTERISK-23279)
Reported by: NITESH BANSAL
Review: https://reviewboard.asterisk.org/r/3225/
Patches:
dynamic_payload_change.patch uploaded by nbansal (license 6418)
........
Merged revisions 408729 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 408730 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408731 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed off-nominal json ref counting issue with using the following API
calls: ast_json_object_set() and ast_json_array_append().
* Fixed off-nominal error reporting in ast_ari_endpoints_list().
* Fixed some miscellaneous off-nominal json ref counting issues in
report_receive_fax_status() and dial_to_json().
........
Merged revisions 408713 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408714 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Updated the code to check to see if MOH is playing on the transferor and if
so then start it on the channel that replaces it during a masquerade.
Example scenario of the problem:
Alice calls Bob and then Bob begins the attended transfer process into a queue.
Upon going on hold Alice hears music and so does Bob once he is in the queue.
Bob then transfers Alice into the queue and then music for Alice stops even
though she should be hearing it since has now replaced Bob in the queue.
The problem that was occurring is that once the channel was masqueraded the app
(queues, confbridge, etc...) had no way of knowing that the channel had just
been swapped out thus it did not start music for the present channel.
Credit to Olle Johansson for pointing me in the right direction on this issue.
(closes issue ASTERISK-19499)
Reported by: Timo Teräs
Review: https://reviewboard.asterisk.org/r/3226/
........
Merged revisions 408642 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 408643 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 408644 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408645 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to retrieve an arbitrary sorcery instance from a dialplan function
(or any place else) there needs to be a registry of sorcery instances.
ast_sorcery_init now creates a hashtab as a registry.
ast_sorcery_open now checks the hashtab for an existing sorcery instance
matching the caller's module name. If it finds one, it bumps the
refcount and returns it. If not, it creates a new sorcery instance,
adds it to the hashtab, then returns it.
ast_sorcery_retrieve_by_module_name is a new function that does a hashtab
lookup by module name. It can be called by the future dialplan function.
res_pjsip/config_system needed a small change to share the main res_pjsip
sorcery instance.
tests/test_sorcery was updated to include a test for the registry.
(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3184/
........
Merged revisions 408518 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is highly unlikely, but - at least in Asterisk 12 - theoretically possible
to load Asterisk with no dialplan whatsoever. If that occurs, and some other
module (that is not a pbx module) attempts to merge its contexts into the
dialplan, the existing merge routine will crash. This is because it is not
insane, and rightly believes that you provided some sort of dialplan,
somewhere.
This patch will gracefully merge the contexts in such a case. Note that this
is highly unlikely to occur in 1.8/11, as features will most likely provide
some dialplan via parking. However, in Asterisk 12, parking is now provided
by res_parking, and hence may create its dialplan later.
(closes issue ASTERISK-23297)
Reported by: CJ Oster
Review: https://reviewboard.asterisk.org/r/3222
........
Merged revisions 408200 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 408201 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 408220 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
URI's are supposed to be case sensitive and all
lower case. In practice some portions of URI's
in ARI are case insensitive and others are not,
such as TECH, which in one instance would match
a lower case name and in another would not. In
this patch, the ast_endpoint_lastest_snapshot()
function is modified to change the TECH portion
to full upper case before lookup. This resolves
the discrepancy noted by the reporter. However
I chose to avoid forcing the /ari prefix of the
URI's to be lower case for now. Except for the
two cases here, all URI's should be lower case,
unless they are part of a resource name or id.
Review: https://reviewboard.asterisk.org/r/3211/
Reported by: Zane Conkle
(closes issue ASTERISK-23125)
........
Merged revisions 408140 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408141 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_format_sdp_parse and ast_format_sdp_generate
the check checks for a valid interface and function
were potentially confusing, and hid an error in the
test of the presence of the function that is called
later. This patch clears up and corrects the test.
Review: https://reviewboard.asterisk.org/r/3208/
(closes issue ASTERISK-23098)
Reported by: marcelloceschia
Patches:
main_format.patch uploaded by marcelloceschia (license 6036)
ASTERISK-23098.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 408137 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 408138 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408139 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The old code depended on undefined va_arg behaviour: calling a function
twice with the same va_list parameter and expecting it to continue where
it left off. The changed code behaves like the manpage says it should.
Also added a bunch of early returns to trap errors (e.g. OOM) instead of
crashing.
The problem was found by Julian Lyndon-Smith. The deviant behaviour on
the raspberry PI also uncovered another bug (fixed in r407875) in the
res_config_pgsql.so driver.
Reported by: jmls
Tested by: jmls
Review: https://reviewboard.asterisk.org/r/3201/
........
Merged revisions 407968 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407970 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a first stab at tweaking the performance profile of the scheduler. Removing
the hashtab usage removes an extra memory allocation when scheduling something and
makes it so rescheduling does not incur any memory allocation at all.
Review: https://reviewboard.asterisk.org/r/3199/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407958 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When formatting an optional IE, the value is, of course, optional. As such, it
is entirely appropriate for ast_json_object_get to return NULL. If that occurs,
we now simply skip the IE that was requested, as it was not provided by the
entity that raised the event.
Thanks to George Joseph (gtjoseph) for catching this and reporting it in
#asterisk-dev
........
Merged revisions 407750 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407752 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows timing implementation data to be stored directly
on the timer itself thus removing the requirement for many
implementations to do a container lookup for the same information.
This means that API calls into timing implementations can directly
access the information they need instead of having to find it.
Review: https://reviewboard.asterisk.org/r/3175/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The appdocsxml.dtd specifies that a "required" attribute in a parameter may
have a value of yes, no, true, or false. On some systems, specifying "False"
instead of "false" would cause a validation error. This patch fixes the casing
to explicitly match the DTD.
........
Merged revisions 407676 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407677 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch brings CDR processing further in line with r407085. During some dial
operations, the application would not be locked to the Dial application and
would instead continue to show the previously known application. In particular,
this would occur when a Parked call would time out. This was due to a previous
snapshot already locking the application to Park - processing this in a Dial
Begin allows the Dial application to reassert its rightful place.
(CDRs. Ugh.)
But hooray for the Parked Call tests for catching this in the Asterisk Test
Suite.
........
Merged revisions 407166 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a number of small-ish problems that were noticed when
witnessing the records that the FreePBX dialplan produces:
(1) Mid-call events (as well as privacy options) have the ability to change the
overall state of the Dial operation after the called party answers. This
means that publishing the DialEnd event when the called party is premature;
we have to wait for the execution of these subroutines to complete before
we can signal the overall status of the DialEnd. This patch moves that
publication and adds handlers for the mid-call events.
(2) The AST_FLAG_OUTGOING channel flag is cleared if an after bridge goto
datastore is detected. This flag was preventing CDRs from being recorded
for all outbound channels that had a 'continue' option enabled on them by
the Dial application.
(3) The CDR engine now locks the 'Dial' application as being the CDR
application if it detects that the current CDR has entered that app. This
is similar to the logic that is done for Parking. In general, if we entered
into Dial, then we want that CDR to record the application as such - this
prevents pre-dial handlers, mid-call handlers, and other shenaniganry
from changing the application value.
(4) The CDR engine now checks for the AST_SOFTHANGUP_HANGUP_EXEC in more places
to determine if the channel is in hangup logic or dead. In either case, we
don't want to record changes in the channel.
(5) The default option for "endbeforehexten" has been changed to "yes". In
general, you don't want to see CDRs in the 'h' exten or in hangup logic.
Since the semantics of that option changed in 12, it made sense to update
the default value as well.
(6) Finally, because we now have the ability to synchronize on the messages
published to the CDR topic, on shutdown the CDR engine will now synchronize
to the messages currently in flight. This helps to ensure that all
in-flight CDRs are written before shutting down.
(closes issue ASTERISK-23164)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3154
........
Merged revisions 407084 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an 'ExtensionStatus' event was raised it included the status as a
numerical value, but did not include a text description of the status.
Added a 'StatusText' field to the event which is a string representation
of the extension status. Also added this to the 'Extension State' command
response.
(closes issue ASTERISK-23154)
Reported by: Jonathan Rose
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CEL data structures need to be protected during a configuration reload
and shutdown. Asterisk crashed during a shutdown because CEL events were
still in flight and the CEL data structures were already destroyed.
* Protected the cel_backends, cel_dialstatus_store, and cel_linkedids ao2
containers with a global ao2 object wrapper.
* Added NULL checks before use of the cel_backends, cel_dialstatus_store,
and cel_linkedids ao2 containers in case the CEL module is already
shutdown.
* Fixed overloading of the cel_linkedids held objects reference count.
During shutdown any held objects would be leaked.
* Fixed memory leak of cel_linkedids held objects if the LINKEDID_END is
not being tracked. The objects in the cel_linkedids container were not
removed if the LINKEDID_END event is not used.
* Added access protection to the cel_backends container during the CLI
"cel show status" command.
* Made cel_backends, cel_dialstatus_store, and cel_linkedids use the
standard ao2 callback templates for the hash and cmp functions.
* Eliminated unnecessary uses of RAII_VAR().
* Made ast_cel_engine_init() cleanup alocated resources on failure.
(closes issue AST-1253)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3128/
........
Merged revisions 406417 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 406418 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 406465 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406466 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally, the manager module would get an "INTERNAL_OBJ: bad magic
number" error on a "core restart gracefully" command if an AMI connection
is established.
* Added ao2_global_obj protection to the sessions global container.
* Fixed the order of unreferencing a session object in session_destroy().
* Removed unnecessary container traversals of the white/black filters
during session_destructor().
(closes issue AST-1242)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3144/
........
Merged revisions 406341 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 406342 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406343 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds improvements to support for allow=all in
pjsip.conf so that it functions as intended. Previously,
the allow/disallow socery configuration would set & clear
codecs from the media.codecs and media.prefs list, but if
all was specified the prefs list was not updated. Then a
call would fail when create_outgoing_sdp_stream() created
an SDP with no audio codecs.
A new function ast_codec_pref_append_all() is provided to
add all codecs to the prefs list - only those not already
on the list. This enables the configuration to specify a
codec preference, but still add all codecs, and even then
remove some codecs, as shown in this example:
allow = ulaw, alaw, all, !g729, !g723
Also, the display order of allow in cli output is updated
to match the configuration by using prefs instead of caps
when generating a human readable string.
Finally, a change to create_outgoing_sdp_stream() skips a
codec when it does not have a payload code instead of the
call failing.
(closes issue ASTERISK-23018)
Reported by: xrobau
Review: https://reviewboard.asterisk.org/r/3131/
........
Merged revisions 405875 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405876 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes typos of "transfered" instead of "transferred" in various code. Fixes incorrect gosub param help text for app_queue.
Fixes Asterisk man pages containing unquoted minus signs. Adds note about the "textsupport" option in sip.conf.sample.
(issue ASTERISK-23061)
(issue ASTERISK-23028)
(issue ASTERISK-23046)
(issue ASTERISK-23027)
(closes issue ASTERISK-23061)
(closes issue ASTERISK-23028)
(closes issue ASTERISK-23046)
(closes issue ASTERISK-23027)
Reported by: Eugene, Jeremy Laine, Denis Pantsyrev
Patches:
transferred.patch uploaded by Jeremy Laine (license 6561)
hyphen.patch uploaded by Jeremy Laine (license 6561)
sip.conf.sample.patch uploaded by Eugene (license 6360)
........
Merged revisions 405791 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 405792 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405829 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The per console verbose level feature as previously implemented caused a
large performance penalty. The fix required some minor incompatibilities
if the new rasterisk is used to connect to an earlier version. If the new
rasterisk connects to an older Asterisk version then the root console
verbose level is always affected by the "core set verbose" command of the
remote console even though it may appear to only affect the current
console. If an older version of rasterisk connects to the new version
then the "core set verbose" command will have no effect.
* Fixed the verbose performance by not generating a verbose message if
nothing is going to use it and then filtered any generated verbose
messages before actually sending them to the remote consoles.
* Split the "core set debug" and "core set verbose" CLI commands to remove
the per module verbose support that cannot work with the per console
verbose level.
* Added a silent option to the "core set verbose" command.
* Fixed "core set debug off" tab completion.
* Made "core show settings" list the current console verbosity in addition
to the root console verbosity.
* Changed the default verbose level of the 'verbose' setting in the
logger.conf [logfiles] section. The default is now to once again follow
the current root console level. As a result, using the AMI Command action
with "core set verbose" could again set the root console verbose level and
affect the verbose level logged.
(closes issue AST-1252)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3114/
........
Merged revisions 405431 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405432 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In https://reviewboard.asterisk.org/r/3057/, applications and functions that
manipulate CDRs were made to interact over Stasis. This was done to
synchronize manipulations of CDRs from the dialplan with the updates the
engine itself receives over the message bus.
This change rested on a faulty premise: that messages published to the CDR
topic or to a topic that forwards to the CDR topic are synchronized with the
messages handled by the CDR topic subscription in the CDR engine. This is not
the case. There is no ordering guaranteed for two messages published to the
same topic; ordering is only guaranteed if a message is published to the same
subscriber.
Stasis was modified in r405311 to allow a publisher to synchronize on the
subscriber. This patch uses that API to synchronize the CDR publishers with
the CDR engine message router, which maintains the overall topic subscription.
(closes issue ASTERISK-22884)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3099/
........
Merged revisions 405312 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds an API call to Stasis that allows a publisher to publish a
stasis message that will not return until a specific subscriber handles the
message. Since a subscriber can have their own forwarding topic which orders
messages from many topics, this allows a publisher who knows of that subscriber
to synchronize to that subscriber regardless of the forwarding relationships
between topics.
This is of particular use for dialplan applications that need to synchronize
on a particular subscriber's handling of a message.
(issue ASTERISK-22884)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3099/
........
Merged revisions 405311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405313 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI action UserEvent event response would include the action header in its
keyvalue pairs list. Adjusted the start of the header loop to skip over the
action part.
(closes issue ASTERISK-22899)
Reported by: outtolunc
Patches:
svn_manager.c.skip_action.diff.txt uploaded by outtolunc (license 5198)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404832 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk does not support any of the transfer encodings specified in
HTTP/1.1, other than the default "identity" encoding.
According to RFC 2616:
A server which receives an entity-body with a transfer-coding it does
not understand SHOULD return 501 (Unimplemented), and close the
connection. A server MUST NOT send transfer-codings to an HTTP/1.0
client.
This patch adds the 501 Unimplemented response, instead of the hard work
of actually implementing other recordings.
This behavior is especially problematic for Node.js clients, which use
chunked encoding by default.
(closes issue ASTERISK-22486)
Review: https://reviewboard.asterisk.org/r/3092/
........
Merged revisions 404565 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Implements the following cli commands:
pjsip list aors
pjsip list auths
pjsip list channels
pjsip list contacts
pjsip list endpoints
pjsip show aor(s)
pjsip show auth(s)
pjsip show channels
pjsip show endpoint(s)
Also...
Minor modifications made to the AMI command implementations to facilitate
reuse.
New function ast_variable_list_sort added to config.c and config.h to implement
variable list sorting.
(issue ASTERISK-22610)
patches:
pjsip_cli_v2.patch uploaded by george.joseph (License 6322)
........
Merged revisions 404480 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch updates the log messages to include descriptive
names for event types. This is an improvement over having
only cryptic type numbers.
(closes issue ASTERISK-22909)
Reported by: outtolunc
Review: https://reviewboard.asterisk.org/r/3081/
Patches:
svn_security_events.c.names.diff.txt uploaded by outtolunc (license 5198)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the explanation, here is a copy-paste of the review board explanation:
Initially, it was discovered that performing an attended transfer of a
multiparty bridge with a PJSIP channel would cause a deadlock. A PBX thread
started a masquerade and reached the point where it was calling the fixup()
callback on the "original" channel. For chan_pjsip, this involves pushing a
synchronous task to the session's serializer. The problem was that a task ahead
of the fixup task was also attempting to perform a channel masquerade. However,
since masquerades are designed in a way to only allow for one to occur at a
time, the task ahead of the fixup could not continue until the masquerade
already in progress had completed. And of course, the masquerade in progress
could not complete until the task ahead of the fixup task had completed.
Deadlock.
The initial fix was to change the fixup task to be asynchronous. While this
prevented the deadlock from occurring, it had the frightful side effect of
potentially allowing for tasks in the session's serializer to operate on a
zombie channel.
Taking a step back from this particular deadlock, it became clear that the
problem was not really this one particular issue but that masquerades
themselves needed to be addressed. A PJSIP attended transfer operation calls
ast_channel_move(), which attempts to both set up and execute a masquerade. The
problem was that after it had set up the masquerade, the PBX thread had swooped
in and tried to actually perform the masquerade. Looking at changes that had
been made to Asterisk 12, it became clear that there never is any time now that
anyone ever wants to set up a masquerade and allow for the channel thread to
actually perform the masquerade. Everyone always is calling ast_channel_move(),
performs the masquerade itself before returning.
In this patch, I have removed all blocks of code from channel.c that will
attempt to perform a masquerade if ast_channel_masq() returns true. Now, there
is no distinction between setting up a masquerade and performing the
masquerade. It is one operation. The only remaining checks for
ast_channel_masq() and ast_channel_masqr() are in ast_hangup() since we do not
want to interrupt a masquerade by hanging up the channel. Instead, now
ast_hangup() will wait for a masquerade to complete before moving forward with
its operation.
The ast_channel_move() function has been modified to basically in-line the
logic that used to be in ast_channel_masquerade(). ast_channel_masquerade() has
been killed off for real. ast_channel_move() now has a lock associated with it
that is used to prevent any simultaneous moves from occurring at once. This
means there is no need to make sure that ast_channel_masq() or
ast_channel_masqr() are already set on a channel when ast_channel_move() is
called. It also means the channel container lock is not pulling double duty by
both keeping the container locked and preventing multiple masquerades from
occurring simultaneously.
The ast_do_masquerade() function has been renamed to do_channel_masquerade()
and is now internal to channel.c. The function now takes explicit arguments of
which channels are involved in the masquerade instead of a single channel.
While it probably is possible to do some further refactoring of this method, I
feel that I would be treading dangerously. Instead, all I did was change some
comments that no longer are true after this changeset.
The other more minor change introduced in this patch is to res_pjsip.c to make
ast_sip_push_task_synchronous() run the task in-place if we are already a SIP
servant thread. This is related to this patch because even when we isolate the
channel masquerade to only running in the SIP servant thread, we would still
deadlock when the fixup() callback is reached since we would essentially be
waiting forever for ourselves to finish before actually running the fixup. This
makes it so the fixup is run without having to push a task into a serializer at
all.
(closes issue ASTERISK-22936)
Reported by Jonathan Rose
Review: https://reviewboard.asterisk.org/r/3069
........
Merged revisions 404356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is in preparation for external MWI support.
Removed code from the system for normal mailbox handling that appends
@default to the mailbox identifier if it does not have a context. The
only exception is the legacy hasvoicemail users.conf option. The legacy
option will only work for app_voicemail mailboxes. The system cannot make
any assumptions about the format of the mailbox identifer used by
app_voicemail.
chan_sip and chan_dahdi/sig_pri had the most changes because they both
tried to interpret the mailbox identifier. chan_sip just stored and
compared the two components. chan_dahdi actually used the box
information.
The ISDN MWI support configuration options had to be reworked because
chan_dahdi was parsing the box@context format to get the box number. As a
result the mwi_vm_boxes chan_dahdi.conf option was added and is documented
in the chan_dahdi.conf.sample file.
Review: https://reviewboard.asterisk.org/r/3072/
........
Merged revisions 404348 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk is shut down, the astdb_atexit() function releases
(finalize) the previously initiated (prepared) SQL statements in
sqlite3. Another thread making a subsequent request can cause a
crash in sqlite3. This patch eliminates that issue by resetting
the statement pointer after it is released/cleared. The sqlite3
code detects the null pointer, and aborts the operation cleanly.
(closes issue AST-1265)
Reported by: Alexander Hömig
(closes issue ASTERISK-22350)
Reported by: Birger "WIMPy" Harzenetter
Review: https://reviewboard.asterisk.org/r/3078/
........
Merged revisions 404344 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 404345 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When doing the rework of the CDR engine that pushed all of the logic into cdr.c
and made it respond to changes in channel state over Stasis, we knew that
accessing the CDR engine from the dialplan would be "slightly"
non-deterministic. Dialplan threads would be accessing CDRs while Stasis
threads would be updating the state of said CDRs - whereas in the past,
everything happened on the dialplan threads. Tests have shown that "slightly"
is in reality "very".
This patch synchronizes things by making the dialplan applications/functions
that manipulate CDRs do so over Stasis. ForkCDR, NoCDR, ResetCDR, CDR, and
CDR_PROP now all use Stasis to send their requests over to the CDR engine,
and synchronize on the channel Stasis topic via a subscription so that they
return their values/control to the dialplan at the appropriate time.
While going through this, the following changes were also made:
* DISA, which can reset the CDR when a user successfully authenticates, now
just uses the ResetCDR app to do this. This prevents having to duplicate
the same Stasis synchronization logic in that application.
* Answer no longer disables CDRs. It actually didn't work anyway - calling
DISABLE on the channel's CDR doesn't stop the CDR from getting the Answer
time - it just kills all CDRs on that channel, which isn't what the caller
would intend.
(closes issue ASTERISK-22884)
(closes issue ASTERISK-22886)
Review: https://reviewboard.asterisk.org/r/3057/
........
Merged revisions 404294 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original commit message by mmichelson (asterisk 12 r403311):
"This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such."
The above was initially committed and then reverted at r403398. The problem
was found to be in core_local.c in the publish_local_bridge_message function.
The ast_unreal_lock_all function locks and adds a reference to the returned
channels and while they were being unlocked they were not being unreffed when
no longer needed. Fixed by unreffing the channels.
Also in bridge.c a lock was obtained on "other->chan", but then an attempt was
made to unlock "other" and not the previously locked channel. Fixed by
unlocking "other->chan"
(closes issue ASTERISK-22709)
Reported by: John Bigelow
........
Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridges have two new optional properties, a creator and a name.
Certain consumers of bridges will automatically provide bridges that
they create with these properties. Examples include app_bridgewait,
res_parking, app_confbridge, and app_agent_pool. In addition, a name
may now be provided as an argument to the POST function for creating
new bridges via ARI.
(closes issue AFS-47)
Review: https://reviewboard.asterisk.org/r/3070/
........
Merged revisions 404042 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Framehooks can be used in a reactive manner to execute specific logic
when a frame is received with a certain type and payload. Since it is
possible for framehooks to provide frames it was possible for this
reactive framehook to be unaware of frames it is looking for.
This change makes it so that when framehooks return a modified frame
the code will now re-iterate (from the beginning) and call any
previous framehooks that have not provided a modified frame themselves.
Review: https://reviewboard.asterisk.org/r/3046/
........
Merged revisions 404027 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows individual dialplan functions to be marked as
'dangerous', to inhibit their execution from external sources.
A 'dangerous' function is one which results in a privilege escalation.
For example, if one were to read the channel variable SHELL(rm -rf /)
Bad Things(TM) could happen; even if the external source has only read
permissions.
Execution from external sources may be enabled by setting
'live_dangerously' to 'yes' in the [options] section of asterisk.conf.
Although doing so is not recommended.
Also, the ABI was changed to something more reasonable, since Asterisk
12 does not yet have a public release.
(closes issue ASTERISK-22905)
Review: http://reviewboard.digium.internal/r/432/
........
Merged revisions 403913 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 403917 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 403959 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403960 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds an event for when an originated call is redirected to
another target. This event contains the original channel and the newly
created channel. If a stasis subscription exists on the original originated
channel for a stasis application then a new subscription will also be
created on the stasis application to the redirected channel. This allows
the application to follow the call path completely.
(closes issue ASTERISK-22719)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/3054/
........
Merged revisions 403808 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were still a few cases in which ATTENDEDTRANSFER and BLINDTRANSFER
wouldn't be set on channels involved with blind and attended transfers.
This would happen with features that were initialized by channel driver
specific mechanisms in multiparty calls. This patch resolves those cases
while attempted to keep the behavior for setting those variables as
consistent as possible.
(closes issue AFS-24)
Review: https://reviewboard.asterisk.org/r/3040/
........
Merged revisions 403781 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The change contains a slightly adjusted patch that was on the issue
(submitted by kmoore). A fix was made by adding in a bridge lock
while calling bridge_start/stop from the framehook callback. Since
the framehook callback is not called from the bridging core the bridge
is not locked, but needs to be before calling bridge_start.
(closes issue ASTERISK-22749)
Reported by: Kinsey Moore
Review: https://reviewboard.asterisk.org/r/3066/
Patches:
lock_inversion.diff uploaded by kmoore (license 6273)
........
Merged revisions 403767 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the ability to specify channel variables when creating/originating a
channel in ARI. The variables are sent in the body of the request and should
be formatted as a single level JSON object. No nested objects allowed.
For example: {"variable1": "foo", "variable2": "bar"}.
(closes issue ASTERISK-22872)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3052/
........
Merged revisions 403752 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The voicemail registration/unregistration functions now take a struct of
callbacks instead of a lengthy parameter list of callbacks.
* The voicemail registration/unregistration functions now prevent a
competing module from interfering with an already registered callback
supplying module.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds CHANNEL read support for chan_pjsip. This allows the dialplan
to use the CHANNEL function on a chan_pjsip channel to obtain run-time
information about the channel from the PJSIP channel driver and the PJSIP
stack. This includes:
* RTP information, including source/destination media addresses, whether or
not the media is secure, held, and other properties.
* RTCP information. This includes sets of parseable information, as well as
individual statistic attriutes.
* PJSIP information. This includes URIs, local/remote signalling addresses,
whether or not the signalling is secure, and other properties.
* The endpoint name. This can be used in conjunction with the PJSIP_ENDPOINT
function to obtain more detailed endpoint information.
Review: https://reviewboard.asterisk.org/r/3038/
........
Merged revisions 403618 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403619 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Eliminated shadowing of the __ast_sorcery_apply_config() name parameter
causing confusion.
* Fix potential crash from sorcery.conf user input in
__ast_sorcery_apply_config() if the user supplied a malformed config line
that is missing the sorcery object type name.
* Remove redundant test in __ast_sorcery_apply_config(). !config and
config == CONFIGS_STATUS_FILEMISSING are identical.
........
Merged revisions 403541 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The snapshot process for endpoints uses the channel ids present
on the endpoint itself. Without keeping a reference it was possible
for the strings to be freed underneath any consumer of an endpoint
snapshot.
A reference is now held by the snapshot to the channel ids and
released when the snapshot is destroyed.
(issue ASTERISK-22801)
Reported by: Matt Jordan
........
Merged revisions 403542 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make ast_sorcery_observer_remove() accept a const callbacks struct.
* Make ast_sorcery_observer_remove() tolerant of the sorcery parameter
being NULL. Now it can be called within a module unload routine if the
sorcery initialization fails.
* Fix ast_sorcery_observer_add() to fail if the container link fails.
........
Merged revisions 403324 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such.
........
Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The patch allows ARI to parse request parameters from an incoming JSON
request body, instead of requiring the request to come in as query
parameters (which is just weird for POST and DELETE) or form
parameters (which is okay, but a bit asymmetric given that all of our
responses are JSON).
For any operation that does _not_ have a parameter defined of type
body (i.e. "paramType": "body" in the API declaration), if a request
provides a request body with a Content type of "application/json", the
provided JSON document is parsed and searched for parameters.
The expected fields in the provided JSON document should match the
query parameters defined for the operation. If the parameter has
'allowMultiple' set, then the field in the JSON document may
optionally be an array of values.
(closes issue ASTERISK-22685)
Review: https://reviewboard.asterisk.org/r/2994/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403177 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created a data model and implemented functionality for an ARI device state
resource. The following operations have been added that allow a user to
manipulate an ARI controlled device:
Create/Change the state of an ARI controlled device
PUT /deviceStates/{deviceName}&{deviceState}
Retrieve all ARI controlled devices
GET /deviceStates
Retrieve the current state of a device
GET /deviceStates/{deviceName}
Destroy a device-state controlled by ARI
DELETE /deviceStates/{deviceName}
The ARI controlled device must begin with 'Stasis:'. An example controlled
device name would be Stasis:Example. A 'DeviceStateChanged' event has also
been added so that an application can subscribe and receive device change
events. Any device state, ARI controlled or not, can be subscribed to.
While adding the event, the underlying subscription control mechanism was
refactored so that all current and future resource subscriptions would be
the same. Each event resource must now register itself in order to be able
to properly handle [un]subscribes.
(issue ASTERISK-22838)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3025/
........
Merged revisions 403134 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created the following AMI commands and corresponding events for res_pjsip:
PJSIPShowEndpoints - Provides a listing of all pjsip endpoints and a few
select attributes on each.
Events:
EndpointList - for each endpoint a few attributes.
EndpointlistComplete - after all endpoints have been listed.
PJSIPShowEndpoint - Provides a detail list of attributes for a specified
endpoint.
Events:
EndpointDetail - attributes on an endpoint.
AorDetail - raised for each AOR on an endpoint.
AuthDetail - raised for each associated inbound and outbound auth
TransportDetail - transport attributes.
IdentifyDetail - attributes for the identify object associated with
the endpoint.
EndpointDetailComplete - last event raised after all detail events.
PJSIPShowRegistrationsInbound - Provides a detail listing of all inbound
registrations.
Events:
InboundRegistrationDetail - inbound registration attributes for each
registration.
InboundRegistrationDetailComplete - raised after all detail records have
been listed.
PJSIPShowRegistrationsOutbound - Provides a detail listing of all outbound
registrations.
Events:
OutboundRegistrationDetail - outbound registration attributes for each
registration.
OutboundRegistrationDetailComplete - raised after all detail records
have been listed.
PJSIPShowSubscriptionsInbound - A detail listing of all inbound subscriptions
and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
PJSIPShowSubscriptionsOutbound - A detail listing of all outboundbound
subscriptions and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
(issue ASTERISK-22609)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2959/
........
Merged revisions 403131 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403133 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change prevents channels used as implementation details from
leaking out to ARI. It does this by preventing creation of JSON blobs
of channel snapshots created from those channels and sanitizing JSON
blobs of bridge snapshots as they are created. This introduces a
framework for excluding information from output targeted at Stasis
applications on a consumer-by-consumer basis using channel sanitization
callbacks which could be extended to bridges or endpoints if necessary.
This prevents unhelpful error messages from being generated by
ast_json_pack.
This also corrects a bug where BridgeCreated events would not be
created.
(closes issue ASTERISK-22744)
Review: https://reviewboard.asterisk.org/r/2987/
Reported by: David M. Lee
........
Merged revisions 403069 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When translating from one format to another it is possible
to inform the translation function that the source frame should
be freed. This was previously done immediately but shortly
afterwards the frame that was freed was accessed and used again.
This change moves code around a bit so that the frame is now
freed after it has been completely used.
(closes issue ASTERISK-22788)
Reported by: Corey Farrell
Patches:
translate-access-after-free-11up.patch uploaded by coreyfarrell (license 5909)
translate-access-after-free-1.8.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 403014 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 403015 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 403016 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403017 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a crash when CELGenUserEvent is called from the dialplan
while CEL is disabled. Currently, CEL does not create its topics and
forwards if it is not enabled and external entities may depend on
these topics blindly since they should always be available. This patch
breaks up route creation and topic/forward creation such that the CEL
topics and forwards will always exist while the router and its
associated routes will be torn down and recreated as necessary.
(closes issue ASTERISK-22799)
Review: https://reviewboard.asterisk.org/r/3010/
Reported by: Matt Jordan
........
Merged revisions 402838 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Similar to how background works, if a say application is called with
this variable set to 'true', 'yes', 'on', etc. then using DTMF while
the say action is in progress will result in the channel jumping to
that extension in the dialplan.
Review: https://reviewboard.asterisk.org/r/3011/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402819 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Two variables were being checked for NULLity immediately
after being declared NULL. I moved the NULL check until
after the variables are allocated.
This allows for the "channelvars" option in manager.conf
to work as intended again.
........
Merged revisions 402767 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ARI POST calls only accept parameters via the URL's query string.
While this works, it's atypical for HTTP API's in general, and
specifically frowned upon with RESTful API's.
This patch adds parsing for application/x-www-form-urlencoded request
bodies if they are sent in with the request. Any variables parsed this
way are prepended to the variable list supplied by the query string.
(closes issue ASTERISK-22743)
Review: https://reviewboard.asterisk.org/r/2986/
........
Merged revisions 402555 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several places in the code were using wait4 while other places were using
waitpid. This change makes all places use waitpid in order to make things
more consistent and since the 'rusage' object passed in/out of wait4 was
never used.
(closes issue ASTERISK-22557)
Reported by: YvesGael
Patches:
asterisk-11.5.1-wait4.patch uploaded by hurdman (license 6537)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When publishing channel snapshots, we currently compute the caller ID name and
number by giving preference first to ani.{name|number}, then to
id.{name|number}. However, when a channel driver (such as chan_sip) updates the
caller ID, it typically only updates the caller ID stored in id.{name|number}.
This means that we are currently giving preference to stale information.
When looking at the rest of the code base, the only other place where we appear
to use this same logic is in app_amd. Everywhere else, we treat the party
information in ani as being separate to the party information in id.
This patch publishes only the caller ID name and number in the snapshot field
for caller_name and caller_num. Note that the information in ANI is still
available in caller_ani.
Review: https://reviewboard.asterisk.org/r/2992/
........
Merged revisions 402501 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402502 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Made the vector macro API be more like linked lists.
1) Added a name parameter to ast_vector() to name the vector struct.
2) Made the API take a pointer to the vector struct instead of the struct
itself.
3) Added an element cleanup macro/function parameter when removing an
element from the vector for ast_vector_remove_cmp_unordered() and
ast_vector_remove_elem_unordered().
4) Added ast_vector_get_addr() in case the vector element is not a simple
pointer.
* Converted an inline vector usage in stasis_message_router to use the
vector API. It needed the API improvements so it could be converted.
* Fixed topic reference leak in router_dtor() when the
stasis_message_router is destroyed.
* Fixed deadlock potential in stasis_forward_all() and
stasis_forward_cancel(). Locking two topics at the same time requires
deadlock avoidance.
* Made internal_stasis_subscribe() tolerant of a NULL topic.
* Made stasis_message_router_add(),
stasis_message_router_add_cache_update(), stasis_message_router_remove(),
and stasis_message_router_remove_cache_update() tolerant of a NULL
message_type.
* Promoted a LOG_DEBUG message to LOG_ERROR as intended in
dispatch_message().
Review: https://reviewboard.asterisk.org/r/2903/
........
Merged revisions 402429 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ConfBridge allows custom DTMF menus to be created in the confbridge.conf
file by assigning a DTMF key sequence to a sequence of actions as follows:
DTMF-sequence = action,action...
Unfortunately, the normal config file processing code interprets an
initial '#' character as starting a directive such as #include.
* Add the ability to escape the first non-blank character in a config line
so the '#' character can be used without triggering the directive
processing code.
(closes issue AFS-2)
(closes issue ASTERISK-22478)
Reported by: Nicolas Tanski
Patches:
jira_asterisk_22478_v11.patch (license #5621) patch uploaded by rmudgett (modified)
Review: https://reviewboard.asterisk.org/r/2969/
........
Merged revisions 402407 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402416 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Typedefed and added doxegen for the voicemail callback functions.
* Simplified the prototypes for ast_install_vm_functions() and
ast_install_vm_test_functions() to use the new function typedefs.
* Simplified the voicemail callback function pointer variable declarations
to use the new function typedefs.
........
Merged revisions 402398 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds the following AMI events, closely following their CLI counterparts:
BridgeDestroy
BridgeKick
BridgeTechnologyList
BridgeTechnologySuspend
BridgeTechnologyUnsuspend
BridgeDestroy kicks an entire bridge, where BridgeKick kicks just one
channel off the bridge. When kicking a channel, specifying the bridge
also (optional) insures it is not removed from the wrong bridge. The
BridgeTechnology events allow viewing and changing suspension status,
which affects only subsequent not active bridging.
(closes ASTERISK-22356)
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/2973/
........
Merged revisions 402387 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For awhile now, we've noticed continuous integration builds hanging on CentOS 6
64-bit build agents. After resolving a number of problems with symbols, strange
locks, and other shenanigans, the problem has persisted. In all cases, gdb
shows the Asterisk process stuck in loader.c on one of the infinite while loops
that calls dlclose repeatedly until success.
The documentation of dlclose states that it returns 0 on success; any other
value on error. It does not state that repeatedly calling it will eventually
clear those errors. Most likely, the repeated calls to dlclose was to force a
close by exhausting the references on the library; however, that will never
succeed if:
(a) There is some fundamental error at work in the loaded library that
precludes unloading it
(b) Some other loaded module is referencing a symbol in the currently loaded
module
This results in Asterisk sitting forever.
Since we have matching pairs of dlopen/dlclose, this patch opts to only call
dlclose once, and log out as an ERROR if dlclose fails to return success. If
nothing else, this might help to determine why on the CentOS 6 64-bit build agent
things are not closing successfully.
Review: https://reviewboard.asterisk.org/r/2970
........
Merged revisions 402287 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 402288 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402289 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Based on feedback from ipengineer in #asterisk, when the media indexer
cannot access a sound file on the system (or otherwise fails) Asterisk
displays a "Cannot frob file" error but fails to tell you why. This is
especially problematic as the media_indexer failing will rpevent Asterisk
from starting, as it is in the core.
We now display the errno error messages so folks can figure out what they've
done wrong.
........
Merged revisions 402285 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402286 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Debug messages aren't free. Even when the debug level is sufficiently low such
that the messages are never evaluated, there is a cost to having to parse
Asterisk logs that contain debug messages that (a) fail to convey sufficient
information or (b) occur so frequently as to be next to meaningless. Based on
having to stare at lots of DEBUG messages, this patch makes the following
changes:
* channel.c: When copying variables from a parent channel to a child channel,
specify the channels involved. Do not log anything for a variable that is not
inherited; the fact that it doesn't have an _ or __ already signifies that it
won't be inherited.
* pbx.c: Specify what function evaluation has occurred that created the result.
* translate.c: Bump up the translator path messages to 10. I've never once had
to use these debug messages, and for each format that is registered (on
startup) and unregistered (on shutdown) the entire f^2 matrix is logged out.
For short tests in the Asterisk Test Suite, this should make finding the
actual test much easier.
* xmldoc.c: The debug message that 'blah' is not found in the tree is expected.
Often, description elements - which are not required - are not provided.
This debug message adds no additional value, as it is not indicative of an
error or helpful in debugging which element did not contain a 'blah' element
as a child. If an element is supposed to contain a child element, then that
XML tree should have failed validation in the first place.
Review: https://reviewboard.asterisk.org/r/2966/
........
Merged revisions 402150 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 402151 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402154 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402155 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Surrogate channels would pop up from time to time in dial message handling.
This would cause a WARNING message to appear, indicating that the Surrogate
channel had no CDR. This patch filters out those channels that have the
internal implementation flag set, such that the WARNING message isn't
displayed.
........
Merged revisions 402090 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In function ast_rtp_instance_early _bridge_make_compatible the
use of instance 0/1 as arguments doesn't clearly communicate a
direction that the copying of payloads from the source channel
to the destination channel will occur, making it more probable
to have the arguments to ast_rtp_codecs_payloads_copy() put in
the reverse order. This patch renames the arguments with _dst
and _src suffixes and corrects the copy direction.
(closes issue ASTERISK-21464)
Reported by: Kevin Stewart
Review: https://reviewboard.asterisk.org/r/2894/
........
Merged revisions 402000 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Test shows rtpmap:119 being copied per this change, but is not in sip invite
........
Merged revisions 402042 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402043 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402054 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also covers ast_app_parse_timelen-fail-zero-length.patch, but the patch was
replaced with one of my own.
(issue ASTERISK-22467)
Reported by: Corey Farrell
Patches:
chan_dahdi-cleanup_push.patch uploaded by coreyfarrell (license 5909)
clicompat-r2.patch uploaded by coreyfarrell (license 5909)
codecs-ilbc-doCPLC.patch uploaded by coreyfarrell (license 5909)
data-cleanup-test-registration.patch uploaded by coreyfarrell (license 5909)
main-asterisk-kill-listener.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 401704 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 401705 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 401706 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original issue noted that the bridge is orphaned when res_parking.so
is not loaded and a call uses the dial kK flags.
A similar issue happens when only one of the park flags is used. In this
case you have the bridge with one or the other channel left in it. The
channel and bridge will stay around until the channel hangs up.
* Fixed the initial bridge channel push failure to act as if the channel
were kicked out of the bridge. The bridge then decides if it needs to be
dissolved.
(closes issue ASTERISK-22629)
Reported by: Kevin Harwell
Review: https://reviewboard.asterisk.org/r/2928/
........
Merged revisions 401424 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401425 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This particular debug message, during a stress test, was logged so
often that it appeared that there may be a memory leak in the logger
code. In actuality, there was no memory leak, but the logger thread
was having a hard time keeping up with the demands of the rest of the
system.
Since this debug message has no value at all, the best way to fix the
problem was to just remove the message.
(closes issue AST-1225)
reported by John Bigelow
Patches:
spammy_log.diff uploaded by Mark Michelson (License #5049)
........
Merged revisions 401364 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A common idiom in Asterisk is to due something like:
for (ao2_obj = list_beginning; ao2_obj = next_item; ao2_ref(ao2_obj, -1)) {
...do stuff...
}
This is nice because it automatically takes care of the object references
for you. However, there is a pitfall here. If a break statement is in the
for loop, then the current reference is not cleaned up. In some cases, this
is on purpose, but in others there is a leak. This commit fixes the leak
cases.
........
Merged revisions 401248 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most callers of ast_channel_make_compatible() happen before the channels
enter a two party bridge. With the new bridging framework, two party
bridging technologies may also call ast_channel_make_compatible() when
there is more than one thread involved with the two channels.
* Added channel lock protection in set_format() and
ast_channel_make_compatible_helper() when dealing with the channel's
native formats while setting up a translation path.
* Fixed best_src_fmt and best_dst_fmt usage consistency in
ast_channel_make_compatible_helper(). The call to
ast_translator_best_choice() got them backwards.
* Updated some callers of ast_channel_make_compatible() and the function
documentation. There is actually a difference between the two channels
passed in.
* Fixed the deadlock potential in res_fax.c dealing with
ast_channel_make_compatible(). The deadlock potential was already there
anyway because res_fax called ast_channel_make_compatible() with chan
locked.
(closes issue ASTERISK-22542)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2915/
........
Merged revisions 401239 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r378303 the AST_FLAG_DISABLE_DEVSTATE_CACHE flag was added that tells
the devstate system to not cache states for non-real devices. However,
when optimizing away channels (ast_do_masquerade), that flag wasn't
copied.
In my case, using Local devices as queue members created a situation
where the endpoint was considered in use, but the state change of the
device being available again was ignored (not cached). The endpoint
channel was optimized into the (previously) Local channel, but kept
the do-not-cache flag. The end result being that the queue member
apparently stayed in use forever.
(closes issue ASTERISK-22718)
Reported by: Walter Doekes
Review: https://reviewboard.asterisk.org/r/2925/
........
Merged revisions 401178 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 401179 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 401180 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Consistently compare format2index() return value so matrix_get() cannot
get passed negative values.
* Optimize ast_translator_best_choice() to defer initializing things until
needed. Also cached the matrix_get() return value rather than repeatedly
calling it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds an /applications API to ARI, allowing explicit management of
Stasis applications.
* GET /applications - list current applications
* GET /applications/{applicationName} - get details of a specific application
* POST /applications/{applicationName}/subscription - explicitly subscribe to
a channel, bridge or endpoint
* DELETE /applications/{applicationName}/subscription - explicitly unsubscribe
from a channel, bridge or endpoint
Subscriptions work by a reference counting mechanism: if you subscript to an
event source X number of times, you must unsubscribe X number of times to stop
receiveing events for that event source.
Review: https://reviewboard.asterisk.org/r/2862
(issue ASTERISK-22451)
Reported by: Matt Jordan
........
Merged revisions 400522 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes said publication for a few reasons:
(1) It is unnecessary. Association of the channel technology with a specific
channel is an implementation detail that should be assumed to "just happen",
and consumers of Stasis don't need to be informed about it.
(2) Publication of said message can now cause crashes, as the actual creation
of a channel in normal locations now stages its messages. As a result, things
that create dummy channels (such as the SIP RTP QOS unit test) and associate
them with a channel technology were now crashing, as the channel itself was
not known by Stasis.
........
Merged revisions 400460 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400461 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r337595, additional security events were added for chan_sip
authentication failures. The new IEs added to the existing invalid
password event were defined as required IEs, but existing users of the
event did not set the new IEs and could not since they didn't apply to
existing uses. They are now marked as optional IEs.
(closes issue ASTERISK-22578)
Reported by: Matt Jordan
........
Merged revisions 400421 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 400440 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400441 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces usage of an additional libxslt cleanup function,
xsltCleanupGlobals, when the configure script detects that it is
available. Early versions of the library did not include this function.
(closes issue ASTERISK-22570)
Reported by: Corey Farrell
Patches:
xsltCleanupGlobals.patch uploaded by Corey Farrell (License 5909)
........
Merged revisions 400384 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r400318 | mmichelson | 2013-10-02 17:08:49 -0500 (Wed, 02 Oct 2013) | 12 lines
Remove unnecessary waits from stasis.
Since caches are updated on publisher threads, there is no need
to wait for the cache updates to occur after a stasis message
is published.
In the case of chan_pjsip device state changes, this set of
changes caused an improvement to performance.
Review: https://reviewboard.asterisk.org/r/2890
........
r400319 | mmichelson | 2013-10-02 17:10:54 -0500 (Wed, 02 Oct 2013) | 3 lines
Remove svn:mergeinfo property.
........
Merged revisions 400318-400319 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previous code was requiring both name and number to be available.
Also restored a comment block on why caller id is also set on an outgoing
call leg in addition to connected line from earlier versions of Asterisk.
........
Merged revisions 400303 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400304 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the switch from channel names to channel unique IDs happened, the poor
CLI command got left in the dust. This fixes the command so that users can
once again see how Asterisk is messing up your billing information.
........
Merged revisions 400286 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400287 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* There were several places in ARI where an external library was mallocing
memory that must always be released with free(). When MALLOC_DEBUG is
enabled, free() is redirected to the MALLOC_DEBUG version. Since the
external library call still uses the normal malloc(), MALLOC_DEBUG
complains that the freed memory block is not registered and will not free
it. These cases must use ast_std_free().
* Changed calls to asprintf() and vasprintf() to the equivalent
ast_asprintf() and ast_vasprintf() versions respectively.
........
Merged revisions 400270 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400271 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch covers two problems:
1) Currently, when a call is transferred into a parking lot from a bridge
(using either the blind transfer or one touch parking mechanisms), the
application fails to be set to "Park" in the resulting CDR record for
the parked channel. This is due to the ParkedCall message arriving before
the BridgeEnter for the channel entering the parking bridge. The ParkedCall
message isn't handled as the CDR for the channel has already been finalized
(due to the channel having left its two party bridge), and the BridgeEnter -
which creates the new CDR - doesn't have the parking information. This patch
modifies the behavior so that reception of a ParkedCall message will - if
not handled by a CDR chain - cause a new CDR to be created and put into the
Parking state.
2) It fixes a FRACK that occurred when a channel is originated into a parking
space. The DialedPending state - which occurs for both Dialed and Originated
channels - assumed that it couldn't handle the parking transitions due to it
having a Party B; however, Originated channels don't have a Party B. As such,
the existing CDR needs to transition into the parking state - this patch does
that.
Review: https://reviewboard.asterisk.org/r/2877/
(closes issue ASTERISK-22482)
Reported by: Richard Mudgett
........
Merged revisions 400062 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r399887, a minor performance improvement was introduced by not allocating
the manager variable struct if it wasn't used. Unfortunately, when directly
accessing an ast_channel struct, manager assumed that the struct was always
allocated. Since this was no longer the case, things got a bit crashy.
This fixes that problem by simply bypassing appending variables if the manager
channel variable struct isn't there.
........
Merged revisions 400058 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400059 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a large performance price currently in the CDR engine. We currently
perform two ao2_callback calls on a container that has an entry for every
channel in the system. This is done to create matching pairs between channels
in a bridge.
As such, the portion of the CDR logic that this patch deals with is how we
make pairings when a channel enters a mixing bridge. In general, when a
channel enters such a bridge, we need to do two things:
(1) Figure out if anyone in the bridge can be this channel's Party B.
(2) Make pairings with every other channel in the bridge that is not already
our Party B.
This is a two step process. In the first step, we look through everyone in the
bridge and see if they can be our Party B (single_state_process_bridge_enter).
If they can - yay! We mark our CDR as having gotten a Party B. If not, we keep
searching. If we don't find one, we wait until someone joins who can be our
Party B.
Step 2 is where we changed the logic
(handle_bridge_pairings and bridge_candidate_process). Previously, we would
first find candidates - those channels in the bridge with us - from the
active_cdrs_by_channel container. Because a channel could be a candidate if it
was Party B to an item in the container, the code implemented multiple
ao2_container callbacks to get all the candidates. We also had to store them
in another container with some other meta information. This was rather complex
and costly, particularly if you have 300 Local channels (600 channels!) going
at once.
Luckily, none of it is needed: when a channel enters a bridge (which is when
we're figuring all this stuff out), the bridge snapshot tells us the unique
IDs of everyone already in the bridge. All we need to do is:
For all channels in the bridge:
If the channel is us or our Party B that we got in step 1, skip it
Compare us and the candidate to figure out who is Party A (based on some
specific rules)
If we are Party A:
Make a new CDR for us, append it to our chain, and set the candidate as
Party B
If they are Party A:
If they don't have a Party B:
Make a new CDR for them, append us to their chain, and us as Party B
Otherwise:
Copy us over as Party B on their existing CDR.
This patch does that.
Because we now use channel unique IDs to find the candidates during bridging,
active_cdrs_by_channel now looks up things using uniqueid instead of channel
name. This makes the more complex code simpler; it does, however, have the
drawback that dialplan applications and functions will be slightly slower as
they have to iterate through the container looking for the CDR by name.
That's a small price to pay however as the bridging code will be called a lot
more often.
This patch also does two other minor changes:
(1) It reduces the container size of the channels in a bridge snapshot to 1.
In order to be predictable for multi-party bridges, the order of the
channels in the container must be stable; that is, it must always devolve
to a linked list.
(2) CDRs and the multi-party test was updated to show the relationship between
two dialed channels. You still want to know if they talked - previously,
dialed channels were always ignored, which is wrong when they have
managed to get a Party B.
(closes issue ASTERISK-22488)
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/2861/
........
Merged revisions 399666 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399667 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The config framework is supposed to be able to load configs that come from
multiple config files. The principle example is chan_sip's sip.conf and
users.conf. Unfortunately, it only does this correctly on initial load.
This patch causes the module's config to be reloaded entirely if any of
the config files change.
(closes issue ASTERISK-22009)
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/2859/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The remote console continued to have issues with its output. In this case CLI
command output would either not show up (if verbose level = 0) or would contain
verbose prefixes (if verbose level > 0) once log messages were sent to the
remote console. The fix now now adds verbose prefix data to all new lines
contained in a verbose log string.
(closes issue ASTERISK-22450)
Reported by: David Brillert
(closes issue AST-1193)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/2825/
........
Merged revisions 399267 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 399268 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some channels exist merely as an implementation detail in Asterisk, such as
ConfBridge's announcer/recorder channels. These channels should never be
exposed to the outside world, or to interfaces that report on Asterisk. We
already filter out such channels in snapshot processing; however, we failed to
filter out bridge related messages that involved these channels.
This patch filters out bridge related messages that are for such channels. This
prevents a spurious WARNING message from being displayed when those channels
move in and out of bridges.
........
Merged revisions 399146 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399147 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial, Queue, and FollowMe applications need to inhibit the bridging
initial connected line exchange in order to support the 'I' option.
* Replaced the pass_reference flag on ast_bridge_join() with a flags
parameter to pass other flags defined by enum ast_bridge_join_flags.
* Replaced the independent flag on ast_bridge_impart() with a flags
parameter to pass other flags defined by enum ast_bridge_impart_flags.
* Since the Dial, Queue, and FollowMe applications are now the only
callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the
calling contract to require the initial COLP exchange to already have been
done by the caller.
* Made all callers of ast_bridge_impart() check the return value. It is
important. As a precaution, I also made the compiler complain now if it
is not checked.
* Did some cleanup in parking_tests.c as a result of checking the
ast_bridge_impart() return value.
An independent, but associated change is:
* Reduce stack usage in ast_indicate_data() and add a dropping redundant
connected line verbose message.
(closes issue ASTERISK-22072)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2845/
........
Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The masquerade super test is failing on v12 with high fence violations and
crashing. The fence violations are showing that party id allocated memory
strings are somehow getting corrupted in the
bridge_reconfigured_connected_line_update() function. The invalid string
values happen to be the freed memory fill pattern.
After much puzzling, I deduced that the
bridge_reconfigured_connected_line_update() is copying a string out of the
source channel's caller party id struct just as another thread is updating
it with a new value. The copying thread is using the old string pointer
being freed by the updating thread. A search of the code found the
unreal_colp_redirect_indicate() routine updating the caller party id's
without holding the channel lock.
A latent bug in v1.8 and v11 hatched in v12 because of the bridging and
connected line changes. :)
(issue ASTERISK-22221)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2839/
........
Merged revisions 398938 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes some long-standing bugs in debug threads that were
exacerbated with recent Optional API work in Asterisk 12.
With debug threads enabled, on some systems, there's a lock ordering
problem between our mutex and glibc's mutex protecting its module list
(Ubuntu Lucid, glibc 2.11.1 in this instance). In one thread, the module
list will be locked before acquiring our mutex. In another thread, our
mutex will be locked before locking the module list (which happens in
the depths of calling backtrace()).
This patch fixes this issue by moving backtrace() calls outside of
critical sections that have the mutex acquired. The bigger change was to
reentrancy tracking for ast_cond_{timed,}wait, which wrongly assumed
that waiting on the mutex was equivalent to a single unlock (it actually
suspends all recursive locks on the mutex).
(closes issue ASTERISK-22455)
Review: https://reviewboard.asterisk.org/r/2824/
........
Merged revisions 398648 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 398649 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 398651 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When AST_DEVMODE is not defined, ast_asserts are not compiled into the
binary. In some cases, this means variables are not referenced or are
set but unused which causes warnings to show up.
(closes issue ASTERISK-22446)
Reported by: Jason Parker (qwell)
........
Merged revisions 398521 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cleanup code for optional_api needs to happen after all of the optional
API users and providers have unused/unprovided. Unfortunately, regsitering the
atexit() handler at the beginning of main() isn't soon enough, since module
destructors run after that.
........
Merged revisions 398149 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398150 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some configuration objects currently won't place nice if reloaded.
Specifically, in this case the pjsip transport objects. Now when
registering an object in sorcery one may specify that the object is
allowed to be reloaded or not. If the object is set to not reload
then upon reloading of the configuration the objects of that type
will not be reloaded. The initially loaded objects of that type
however will remain.
While the transport objects will not longer be reloaded it is still
possible for a user to configure an endpoint to an invalid transport.
A couple of log messages were added to help diagnose this problem if
it occurs.
(closes issue ASTERISK-22382)
Reported by: Rusty Newton
(closes issue ASTERISK-22384)
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2807/
........
Merged revisions 398139 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With the new work in Asterisk 12, there are some uses of the
optional_api that are prone to failure. The details are rather involved,
and captured on [the wiki][1].
This patch addresses the issue by removing almost all of the magic from
the optional API implementation. Instead of relying on weak symbol
resolution, a new optional_api.c module was added to Asterisk core.
For modules providing an optional API, the pointer to the implementation
function is registered with the core. For modules that use an optional
API, a pointer to a stub function, along with a optional_ref function
pointer are registered with the core. The optional_ref function pointers
is set to the implementation function when it's provided, or the stub
function when it's now.
Since the implementation no longer relies on magic, it is now supported
on all platforms. In the spirit of choice, an OPTIONAL_API flag was
added, so we can disable the optional_api if needed (maybe it's buggy on
some bizarre platform I haven't tested on)
The AST_OPTIONAL_API*() macros themselves remained unchanged, so
existing code could remain unchanged. But to help with debugging the
optional_api, the patch limits the #include of optional API's to just
the modules using the API. This also reduces resource waste maintaining
optional_ref pointers that aren't used.
Other changes made as a part of this patch:
* The stubs for http_websocket that wrap system calls set errno to
ENOSYS.
* res_http_websocket now properly increments module use count.
* In loader.c, the while() wrappers around dlclose() were removed. The
while(!dlclose()) is actually an anti-pattern, which can lead to
infinite loops if the module you're attempting to unload exports a
symbol that was directly linked to.
* The special handling of nonoptreq on systems without weak symbol
support was removed, since we no longer rely on weak symbols for
optional_api.
[1]: https://wiki.asterisk.org/wiki/x/wACUAQ
(closes issue ASTERISK-22296)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2797/
........
Merged revisions 397989 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Refactored cases where a combination of ast_verbose/options_verbose were
present. Also in general tried to eliminate, in as many places as possible,
where the options_verbose global variable was being used. Refactored the way
local and remote consoles handle verbose message logging in an attempt to
solve the various discrepancies that sometimes would show between the two.
(closes issue AST-1193)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/2798/
........
Merged revisions 397948 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 397958 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r397921 | mmichelson | 2013-08-29 10:42:10 -0500 (Thu, 29 Aug 2013) | 6 lines
Resolve assumptions that bridge snapshots would be non-NULL for transfer stasis events.
Attempting to transfer an unbridged call would result in crashes in either CEL code or
in the conversion to AMI messages.
........
r397922 | mmichelson | 2013-08-29 10:42:29 -0500 (Thu, 29 Aug 2013) | 3 lines
Remove extra debug message.
........
Merged revisions 397921-397922 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made ast_strftime_locale() ensure that the output buffer is initialized.
The std library strftime() returns 0 and does not touch the buffer if it
has an error. However, the function can also return 0 without an error.
(closes issue ASTERISK-22412)
Reported by: rmudgett
........
Merged revisions 397902 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397903 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed return value of ast_cdr_serialize_variables() on error. It needs
to return 0 indicating no CDR variables found.
* Made ast_cdr_serialize_variables() check the return value of
cdr_object_format_property() and assert if nonzero. A member of the
cdr_readonly_vars[] was not handled.
* Removed unused elements from cdr_readonly_vars[]: total_duration,
total_billsec, first_start, and first_answer.
........
Merged revisions 397900 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397901 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Stasis events (which get distributed over the ARI WebSocket) are created
by subscribing to the channel_all_cached and bridge_all_cached topics,
filtering out events for channels/bridges currently subscribed to.
There are two issues with that. First was a race condition, where
messages in-flight to the master subscribe-to-all-things topic would get
sent out, even though the events happened before the channel was put
into Stasis. Secondly, as the number of channels and bridges grow in the
system, the work spent filtering messages becomes excessive.
Since r395954, individual channels and bridges have caching topics, and
can be subscribed to individually. This patch takes advantage, so that
channels and bridges are subscribed to on demand, instead of filtering
the global topics.
The one case where filtering is still required is handling BridgeMerge
messages, which are published directly to the bridge_all topic.
Other than the change to how subscriptions work, this patch mostly just
moves code around. Most of the work generating JSON objects from
messages was moved to .to_json handlers on the message types. The
callback functions handling app subscriptions were moved from res_stasis
(b/c they were global to the model) to stasis/app.c (b/c they are local
to the app now).
(closes issue ASTERISK-21969)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2754/
........
Merged revisions 397816 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Storing a backtrace for each allocation in anticipation of a memory
management problem is very CPU intensive.
* Added the CLI "memory backtrace {on|off}" command to request that the
backtrace be gathered only on request. The backtrace is off by default.
(issue ASTERISK-22221)
Reported by: Matt Jordan
........
Merged revisions 397809 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397811 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel with the OUTGOING flag leaves a bridge, and it will survive
being pulled from the bridge (either because it will execute dialplan,
go into another bridge, or live in a friendly autoloop), we have to clear
the OUTGOING flag. This is the signal to the CDR engine that this channel
is no longer a second class citizen, i.e., it is not "dialed".
The soft hangup flags are only half the picture. If a channel is being
moved from one bridge to another, the soft hangup flags aren't set; however,
the state of the bridge_channel will not be hung up. Since the channel does
not have one of the two hang up states, that implies that the channel is
still technically alive.
This patch modifies the check so that it checks both the soft hangup flags
as well as the bridge_channel state. If either suggests that the channel
is going to persist, we clear the OUTGOING flag.
........
Merged revisions 397690 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The config options test requires the entire configuration item to be transparent from
the documentation system. So we let it do that too.
As an aside, please do not use this power for evil. Documentation is your friend, and
you really should document your configurations. Hiding your module's configuration
information from the system attempting to enforce some sanity in the universe is something
only a Bond villain would contemplate.
........
Merged revisions 397628 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When originating channels, ast_pbx_outgoing_* caused the dialed channel
reference to be bumped twice. Ostensibly, this routine is bumping the channel
lifetime such that the channel doesn't get nuked in between locks/unlocks;
however, since the routine should return the dialed channel with its
reference bumped, it only needs to do this one time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Starting Asterisk would kick back an ERROR message stating that the Stasis
message type ast_channel_snapshot_type was used prior to initialization.
This occurred due to the caching topic being created prior to the message
type that it depended on.
This patch re-orders the start up such that the message type is initialized
prior to the caching topic. It also checks the return value of the
initialization of the agent login/logoff types.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397585 65c4cc65-6c06-0410-ace0-fbb531ad65f3
DTMF start/end and hold/unhold events have state because a DTMF begin
event and hold event must be ended by something.
The following cases need to be handled when a channel is moved around in
the system.
* When a channel leaves a bridge it may owe a DTMF end event to the
bridge.
* When a channel leaves a bridge it may owe an UNHOLD event to the bridge.
(This case is explicitly ignored because things like transfers need
explicit control over this.)
* When a channel leaves the bridging system it may need to simulate a DTMF
end event to the channel.
* When a channel leaves the bridging system it may need to simulate an
UNHOLD event to the channel.
The patch also fixes the following:
* Fixes playing a file and restarting MOH using the latest MOH class used.
(closes issue ASTERISK-22043)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2791/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397577 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Review https://reviewboard.asterisk.org/r/2580/ tried to fix the mismatch
in memory pools but had a math error determining the buffer size and
didn't address other similar memory pool mismatches.
* Effectively reverted the previous patch to go in the same direction as
trunk for the returned memory pool of ast_bt_get_symbols().
* Fixed memory leak in ast_bt_get_symbols() when BETTER_BACKTRACES is
defined.
* Fixed some formatting in ast_bt_get_symbols().
* Fixed sig_pri.c freeing memory allocated by libpri when MALLOC_DEBUG is
enabled.
* Fixed __dump_backtrace() freeing memory from ast_bt_get_symbols() when
MALLOC_DEBUG is enabled.
* Moved __dump_backtrace() because of compile issues with the utils
directory.
(closes issue ASTERISK-22221)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2778/
........
Merged revisions 397525 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397528 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If an option is registered to a type and it is the last known type in the list
of registered types, and the option fails to register, an overrun of the types
array can occur due to the index variable having been already incremented.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397568 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass through support for Opus and VP8. That includes:
* Format attribute negotiation for Opus. Note that unlike some other codecs,
the draft RFC specifies having spaces delimiting the attributes in addition
to ';', so you have "attra=X; attrb=Y". This broke the attribute parsing in
chan_sip, so a small tweak was also included in this patch for that.
* A format attribute negotiation module for Opus, res_format_attr_opus
* Fast picture update for VP8. Since VP8 uses a different RTCP packet number
than FIR, this really is specific to VP8 at this time.
Note that the format attribute negotiation in res_pjsip_sdp_rtp was written
by mjordan. The rest of this patch was written completely by Lorenzo Miniero.
Review: https://reviewboard.asterisk.org/r/2723/
(closes issue ASTERISK-21981)
Reported by: Tzafrir Cohen
patches:
asterisk_opus+vp8_passthrough_20130718.patch uploaded by lminiero (License 6518)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are times when a configuration option should not have documentation.
1. Some options are registered with a particular object merely as a warning to
users. These options aren't even really 'deprecated' - which has its own
separate API call - they are actually provided by a different configuration
file. The options are merely registered so that the user gets a warning that
a different configuration file provides the item.
2. Some object types - most notably some used by modules that use sorcery - are
completely internal and should never be shown to the user.
3. Sorcery itself has several 'hidden' fields that should never be shown to a
user.
This patch updates the configuration framework and sorcery with additional API
calls that allow a module to register types as internal and options as not
requiring documentation. This bypasses the XML documentation checking.
This patch also re-enables the strict XML documentation checking in trunk, as
well as updates some documentation that was missing.
Review: https://reviewboard.asterisk.org/r/2785/
(closes issue ASTERISK-22359)
Reported by: Matt Jordan
(closes issue ASTERISK-22112)
Reported by: Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a new dialplan application, SayAlphaCase, that performs much
the same function as SayAlpha except that it takes additional options
which allow the user to specify whether the case of each letter should
be announced for uppercase, lowercase, or all letters. Similar
functionality has been added to the SAY ALPHA AGI command via an
optional parameter.
Original Patch by: Kevin Scott Adams
Reported by: Kevin Scott Adams
Review: https://reviewboard.asterisk.org/r/2725/
(closes issue ASTERISK-20782)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cause code needs to be passed from the disconnecting channel to the
bridge peers if the disconnecting channel dissolves the bridge.
* Made the call to an app_agent_pool agent disconnect with the busy cause
code if the agent does not ack the call in time or hangs up before acking
the call.
(closes issue ASTERISK-22042)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2772/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This essentially makes app_queue usable again. From reviewboard:
* Reporting of transfers and call completion is done by creating stasis
subscriptions and listening for specific events in order to determine
when the call is finished (either via a transfer or hangup).
* Dial end messages have been added where they were previously missing.
* Queue stats are properly being updated again once calls have finished.
* AgentComplete stasis messages and AMI events are now occurring again.
* Mixmonitor starting has been factored into its own function and uses the
Mixmonitor API now instead of using ast_pbx_run()
In addition to the changes in app_queue, there are several supplementary changes as well:
* Queue logging now differentiates between attended and blind transfers. A
note about this is in the CHANGES file.
* Local channel optimization events now report more information. This
includes which of the two local channels involved is the destination of
the optimization, the channel that is replacing the destination local channel,
and an identifier so that begin and end events can be matched to each other.
The end events are now sent whether the optimization was successful or not and
includes an indicator of whether the optimization was successful.
* Changes were made to features and bridging_basic so that additional flags may
be set on a bridge. This is necessary because the queue requires that its
bridge only allows move-swap local channel optimizations into the bridge.
(closes issue ASTERISK-21517)
Reported by Matt Jordan
(closes issue ASTERISK-21943)
Reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2694
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397451 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Resync the abstract jitter buffer on the following additional control
frames:
AST_CONTROL_HOLD
AST_CONTROL_UNHOLD
AST_CONTROL_T38_PARAMETERS
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397440 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This modifies the behavior of the CEL engine to conform to documented
behavior for Asterisk 12 as defined on the wiki
https://wiki.asterisk.org/wiki/display/AST/Asterisk+12+CEL+Specification
The primary changes deal with removal of the peer field from function
calls since it is no longer directly relevant to the bridging system
and removal of the layer of CDR-like business logic that was providing
a partial emulation of Asterisk 11 CEL functionality. With this change,
there is no longer a distinction between "bridges" and "conferences"
and all participation changes are denoted with bridge enter and bridge
exit messages.
This updates the CEL unit tests to handle these changes and simplifies
some of the macros used in the process.
This also fixes a segfault when attempting to ref a configuration that
failed to load.
Review: https://reviewboard.asterisk.org/r/2788/
(issue ASTERISK-21567)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397431 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The --version-script,asterisk.exports linker flag (and the module
exports) didn't provide _IO_stdin_used in the list of exported symbols.
That causes some kind of libc compatibility mode to kick in, where
stdio file structures (stdout/stderr) land somewhere else. In the
case of the Sparc, they landed on misaligned memory.
This became apparent first after r376428 (Reorder startup sequence)
when a lot of ast_log's were replaced with fprintf's. Writing to
stderr triggered a SIGBUS. (Compared to x86 and amd64 architectures,
the Sparc is very picky about memory alignment.)
(issue ASTERISK-21763)
(issue ASTERISK-21665)
Reported by: Jeremy Kister
Review: https://reviewboard.asterisk.org/r/2760/
........
Merged revisions 397377 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397378 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the file udptl.conf is unavailable at startup, UDPTL will fail to
initialize and while it makes some noise, it isn't immediately
obvious why consumers start to fail when using it. This patch makes
UDPTL load as though an empty config was provided when udptl is
unavailable at startup.
(closes issue ASTERISK-22349)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2773/
........
Merged revisions 397365 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397366 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For times when a reference in ARI might be ambiguous, the reference is
built as an URI (such as channel:1376341790.3).
An endpoint's channel list is not ambiguous, and in fact the field is
named 'channel_ids', but it had channel URI's instead of channel id's.
This patch changes the list to be the raw id instead of the URI.
(closes issue ASTERISK-22291)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397297 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added an option flags parameter to interval hooks. Interval hooks now
can specify if the callback will affect the media path or not.
* Added an option flags parameter to the bridge action custom callback.
The action callback now can specify if the callback will affect the media
path or not.
* Made the holding bridge technology reexamine the participant idle mode
option whenever the entertainment is restarted.
* Fixed app_agent_pool waiting agents needlessly starting and stopping MOH
every second by specifying the heartbeat interval hook as not affecting
the media path.
* Fixed app_agent_pool agent alert from restarting the MOH after the alert
beep. The agent entertainment is now changed from MOH to silence after
the alert beep.
* Fixed holding bridge technology to defer starting the entertainment. It
was previously a mixture of immediate and deferred.
* Fixed holding bridge technology to immediately stop the entertainment.
It was previously a mixture of immediate and deferred. If the channel
left the bridging system, any deferred stopping was discarded before
taking effect.
* Miscellaneous holding bridge technology rework coding improvements.
Review: https://reviewboard.asterisk.org/r/2761/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397294 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Performing a blond transfer (attended transfer that is completed
before the transfer recipient picks up) externally through chan_sip
or chan_pjsip would result in lost references to the channels
involved with the transfer as well as their bridge.
(closes issue ASTERISK-22092)
Reported by: mmichelson
Review: https://reviewboard.asterisk.org/r/2766/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is not safe to iterate over a macro'd list of ao2 objects, deref them such
that the item's destructor is called, and leave them in the list. The list
macro to iterate over items requires the item to be a valid allocated object
in order to proceed to the next item; with MALLOC_DEBUG on the corruption of
the linked list is caught in the crash.
This patch fixes the invalid access to free'd memory by removing the ao2 item
from the list before de-refing it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change protects accesses of res_parking such that it can unload
safely once transient uses of its registered functions are complete.
The parking API has been restructured such that its consumers do not
have access to the vtable exposed by the parking provider, but instead
route through stubs to prevent consumers from holding on to function
pointers.
This adds calls to all the parking unload functions and moves
application loading and unloading into functions in
parking_applications.c similar to the rest of the parts of res_parking.
Review: https://reviewboard.asterisk.org/r/2763/
(closes issue ASTERISK-22142)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This removes unused code, event types, IE pltypes, and event IE types
where possible and makes several functions private that were once
public. This includes a renumbering of the remaining event and IE types
which breaks binary compatibility with previous versions. The last
remaining consumers of the old event system (or parts thereof) are
main/security_events.c, res/res_security_log.c, tests/test_cel.c,
tests/test_event.c, main/cel.c, and the CEL backends.
Review: https://reviewboard.asterisk.org/r/2703/
(closes issue ASTERISK-22139)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SIP/foo -- Local;1==Local;2 -- .... -- Local;1==Local;2 -- SIP/bar
Kick a ;1 channel and the chain toward SIP/foo goes away.
Kick a ;2 channel and the chain toward SIP/bar goes away.
This can leave a local channel chain between the kicked ;1 and ;2 channels
that are orphaned until you manually request one of those channels to
hangup or request the bridge to dissolve.
* Added ast_bridge_kick() as a companion to ast_bridge_remove(). The
functional difference is that ast_bridge_kick() may dissolve the bridge as
a result of the channel leaving the bridge.
* Made CLI "bridge kick <bridge> <channel>" use ast_bridge_kick() instead
of ast_bridge_remove() so the bridge can dissolve if needed.
* Renamed bridge_channel_handle_hangup() to ast_bridge_channel_kick() and
made it accessible to other files.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396877 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The horrid structure of the source in the utils directory strikes again.
Moved the _ast_mem_backtrace_buffer[] definition from the logical location
in utils.c to hashtab.c so the aelparse and conf2ael utilities can link.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Change r395954 reordered some stasis object destruction, which should
have been fine. Unfortunately, it caused some hard to reproduce issues
related to objects being accessed after they had been destroyed. The
patch in r396329 fixed the destruction order problem; this patch
addresses the underlying issue. A few other stasis-related fixes were
also added.
* Add ref-bumps around areas where objects may get transitively
destroyed. (For example, where we lock a topic, unref a subscription,
which unrefs the topic, which explodes the topic when we try to
unlock it.)
* Wrote an extensive doxygen page about Stasis implementation,
relationships between objects, lifecycles of objects, how the
refcounting works, etc. Many other comments were added, corrected, or
cleaned up.
* Added an assert to the topic dtor to catch extra ref decrements.
* Fixed type used after destruction errors for graceful shutdown in
stasis_channels.c.
* I added two unit tests in an attempt to catch destruction order
issues. Since the underlying cause is a race condition, though, the
tests rarely failed even when the code was wrong.
* Fixed a leak in stasis_cache_pattern.c.
(closes issue ASTERISK-22243)
Review: https://reviewboard.asterisk.org/r/2746/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This reworks the CLI commands used to access sounds information from
"sounds show[ soundid]" to "core show sounds" and
"core show sound <soundid>". This also reworks the "sounds reload" CLI
command to fall under normal module reloading ("module reload sounds").
Also, make trunk build when DEBUG_MALLOC is not enabled.
Review: https://reviewboard.asterisk.org/r/2745/
(closes issue ASTERISK-22141)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396829 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When asterisk has run out of memory (for whatever reason), the alloc
function logs a message. Logging requires memory. A recipe for
infinite recursion.
Stop the recursion by comparing the function call depth for sane values
before attempting another OOM log message.
Review: https://reviewboard.asterisk.org/r/2743/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396822 65c4cc65-6c06-0410-ace0-fbb531ad65f3
By their nature, the connected line and redirecting interception routines
are not supposed to affect the channel's media. Therefore, they should
not suspend and unsuspend the channel while running. The
suspend/unsuspend operations could be expensive depending upon the bridge
and channel technology involved.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396814 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Bridge API DTMF hook matching would not deal with DTMF end events
only. It required a DTMF begin event to start matching the DTMF hooks.
There are many places in Asterisk where code only generates DTMF end
events without the corresponding begin event. One such place is the AMI
action Atxfer.
* Fixed DTMF hook matching if there is a string of DTMF frames in the read
queue. We could potentially miss some of them before.
* Fixed AMI Atxfer action documentation.
(closes issue ASTERISK-22037)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2752/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The feature_attended_transfer test is failing due to Asterisk not
passing DTMF in the bridges created for internal attended transfers.
This sets the features initialization routine to set this flag by
default and adjusts the basic bridge and confbridge's use of the
bridging system accordingly as per Richard's suggestion instead of
adjusting this individual case. This change allows the necessary DTMF
to pass through the attended transfer bridge and complete the test
successfully.
Review: https://reviewboard.asterisk.org/r/2759/
(closes issue ASTERISK-22222)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These problems were all caught by a test in the Asterisk Test Suite that
originated some Local channels and attempted to move the ;2 half of the Local
channel into a bridge using the Bridge AMI action.
(1) When originating a channel, the Newchannel event is emitted quickly;
however, the ;2 channel will not have a pbx thread assigned to it until
after the outbound 'dialing' for the ;1 is complete. Thus, there is a period
of time where the outside world "knows" of the channel's existence and can
influence it but Asterisk has not yet started the dialplan execution thread.
If a Bridge AMI action is taken on the channel, the channel appears to be a
Dialed channel with no PBX thread; hence, the channel will be imparted into
the Bridge by first 'yanking' the channel. At the same time, a race condition
can occur after the yank (but before entering the bridge) when ;1 answers
and starts a PBX on the ;2. The end result currently is an assertion failure
in the Bridging API, as a channel with a PBX is imparted into the Bridge.
There's no way to prevent AMI from attempting to Bridge a channel
immediately after creation; likewise, holding the channel lock through the
entire Dial operation is unwise (and impossible). Instead of treating the
presence of a PBX thread as an error, we simply bail out of the adding the
channel to the bridge through ast_bridge_impart. The Bridge action will
then fail - but we avoid a situation where the channel is both executing
a PBX thread and simultaneously being given a separate thread in the
bridging system (which would be a "bad thing"). Since imparting a channel
with a PBX *can* occur and is not a programming error, the asserts have been
removed.
(2) When the first condition occurs, we have to take one of two actions: either
hangup the yanked channel as it did not enter the bridge, or deref it
because we don't own it. We can determine if we own it or not by testing
for the presence of the PBX thread. If we hung it up directly, we'd crash.
(3) bridge_find_channel does not increase the reference count of the
ast_bridge_channel object. The RAII_VAR usage in ast_bridge_add_channel
thus created a ticking time bomb in whatever bridge the channel moved into,
as the destructor for the ast_bridge_channel object would be called.
Review: https://reviewboard.asterisk.org/r/2741/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the thread servicing the dial request isn't created successfully, the
outgoing dial lock will still be held when the function returns. This patch
unlocks the lock on this off nominal path.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a dial operation fails, the pbx_outgoing_attempt routine will exit without
first having unlocked the outgoing dial lock. This would be a "bad thing".
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This makes it so that we can detect failures to originate as with
earlier versions of Asterisk, which restores the Asterisk 11 behavior
for the originate manager action. This was causing the ACL tests for
SIP and IAX2 to fail since those tests expected originate failures
when ACLs would cause rejections. Also, this patch fixes crashes in
chan_sip when ACLs rejected peers during registration verification.
(closes issue ASTERISK-22212)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2753/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The lonely flag is an optional flag for bridge channels that will
make them leave a bridge when a channel leaves if only lonely
channels are in the bridge at that point. This is useful for things
like ending recording and playback channels when they cease to be
interacting with other channels in the bridge.
(closes issue ASTERISK-22117)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2721/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Changed ast_manager_build_bridge_state_string() to assume an empty
prefix string just like ast_manager_build_channel_state_string().
* Created ast_manager_build_bridge_state_string_prefix() to work just like
ast_manager_build_channel_state_string_prefix().
* Made BridgeMerge AMI event use To/From prefixes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does three things:
1. It provides a Surrogate channel technology with a consolidated
"implementation detail flag" on the channel technology. This tells
consumers of Stasis that the creation of this channel is an implementation
detail in Asterisk and can be ignored (if they so choose). This
consolidates the conference recorder/announcer flags as well - these flags
had no additional meaning beyond "ignore this channel please".
2. It modifies allocation of a channel in two ways:
(a) If a channel technology can be determined from the name, we set it
directly in the allocation routine. This prevents the initial
publication of the message from going out with a NULL channel technology
where possible. This lets Stasis consumers get the right channel
technology on the first publication.
(b) It reorganizes allocation to make use of the 'finalized' property on the
channel. This was already used to know that a channel had completely
finished its construction in the masquerade routine; now we also use it
to know whether or not the setting of certain channel properties is
occurring during or post construction. The various set routines were
modified accordingly as well.
3. The masquerade event is now dead, Jim. It no longer served any purpose
whatsoever - if you perform a call pickup you'll get a Pickup event;
if you perform an attended transfer you will still get those events; if you
steal a channel to put it elsewhere you'll get the corresponding NewExten or
BridgeEnter events.
Review: https://reviewboard.asterisk.org/r/2740
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396392 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Backtraces are allocated outside of the usual memory tracking performed by
MALLOC_DEBUG. This allows them to be used by the memory tracking enabled
by that build option; however, it also means that when backtraces are
disposed of they have to be done so outside of the re-defined free.
This patch undef's free prior to disposing of the allocated backtrace when
a backtrace is appended as a result of 'core show locks'.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396391 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents unreal channel optimization during the prequalification
phase when either channel is involved in DTMF emulation. This prevents
a situation where an emulated digit would be missed because the
emulation was never completed.
Review: https://reviewboard.asterisk.org/r/2747/
(closes issue ASTERISK-22214)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Depending on when a Surrogate channel replaces an existing channel, it is
possible to get a Dial message for the Surrogate channel. When this occurs, no
CDR will exist for the channel as Surrogate channels are ignored. Safely handle
the case when a CDR doesn't exist for a Dial message.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396371 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch implements the controls from ARI recordings. The controls
are:
* DELETE /recordings/live/{recordingName} - stop recording and
discard it
* POST /recordings/live/{recordingName}/stop - stop recording
* POST /recordings/live/{recordingName}/pause - pause recording
* POST /recordings/live/{recordingName}/unpause - resume recording
* POST /recordings/live/{recordingName}/mute - mute recording (record
silence to the file)
* POST /recordings/live/{recordingName}/unmute - unmute recording.
Since this underlying functionality did not already exist, is was
added to app.c by a set of control frames, similar to how playback
control works. The pause/mute control frames are toggles, even though
the ARI controls are idempotent, to be consistent with the playback
control frames.
(closes issue ASTERISK-22181)
Review: https://reviewboard.asterisk.org/r/2697/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Stasis changes in r395954 had an unanticipated side effect: messages
published directly to an _all topic does not get forwarded to the
corresponding caching topic.
This patch fixes that by changing how caching topics forward messages,
and how the caching pattern forwards are setup.
For the caching pattern, the all_topic is forwarded to the
all_topic_cached. This forwards messages published directly to the
all_topic to all_topic_cached.
In order to avoid duplicate messages on all_topic_cached, caching topics
were changed to no longer forward uncached messages. Subscribers to an
individual caching topic should only expect to receive cache updates,
and subscription change messages. Since individual caching topics are
new, this shouldn't be a problem.
There are a few minor changes to the pre-cache split behavior.
* For topics changed to use the caching pattern, the all_topic_cached
will forward snapshots in addition to cache updates. Since
subscribers by design ignore unexpected messages, this should be
fine.
* Caching topics that don't use the caching pattern no longer forward
non-cache updates. This makes no difference for the current caching
topics.
* mwi_topic_cached, channel_by_name_topic and
presence_state_topic_cached have no subscribers
* device_state_topic_cached's only subscriber only processes cache
udpates
(issue ASTERISK-22243)
Review: https://reviewboard.asterisk.org/r/2738
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Dial and Queue would previously apply a new set of features whenever
bridging. These options would be based purely on the options supplied
to the dial/queue applications. This patch changes the function those
applications use to bridge calls so that the features will be added
to the set of existing features for each channel rather than having
them override the existing features.
(closes issue ASTERISK-22209)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2713/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Roles are now cleared with each entry into a bridge with addChannel.
If the roles parameter is present, the role specified will be applied
to all channels being added with the addChannel command.
(closes issue ASTERISK-21973)
Reported by: Matt Jordan
https://reviewboard.asterisk.org/r/2691/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new res_ari_asterisk.so module presents several config options
from asterisk main. Unfortunately, they aren't exported, so the module
won't load on Linux.
This patch renames the variables, adding the ast_ prefix so they will
be exported.
Review: https://reviewboard.asterisk.org/r/2737
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The AMI message router is owned wholly by manager.c. Previously, each of the
manager_{item} source files had their own message router and they unsubscribed
from each; once they moved over to using a single message router only a single
unsubscribe became necessary.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* BridgeEnter now contains the unique ID of the channel that is to be swapped out, if applicable.
* There is a ParkedCallSwap event that is sent when a parked channel has a new channel take its place.
(closes issue ASTERISK-22193)
reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/2712
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396107 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This moves ast_str_container_alloc, ast_str_container_add,
ast_str_container_remove, and related private functions into
strings.c/h since they really don't belong in astobj2.c/h.
As a result of this move, utils also had to be updated.
Review: https://reviewboard.asterisk.org/r/2719/
(closes issue ASTERISK-22041)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396105 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit is smaller than the initial review placed on review board. This is because
a change to allow for channel drivers to access parking functionality externally was
committed and invalidated quite a few of the changes initially made.
(closes issue ASTERISK-22039)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2717
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396103 65c4cc65-6c06-0410-ace0-fbb531ad65f3