This does introduce a dependency on the GMime library for handling HTTP POSTs, but it is available in most distros.
If the library is present, then the compile flag for ENABLE_UPLOADS is enabled by default in menuselect.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109229 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r109226 | mmichelson | 2008-03-17 17:05:49 -0500 (Mon, 17 Mar 2008) | 12 lines
Fix a logic flaw in the code that stores lock info which is displayed
via the "core show locks" command. The idea behind this section of code was
to remove the previous lock from the list if it was a trylock that had failed.
Unfortunately, instead of checking the status of the previous lock, we were referencing
the index immediately following the previous lock in the lock_info->locks array.
The result of this problem, under the right circumstances, was that the lock which
we currently in the process of attempting to acquire could "overwrite" the previous lock
which was acquired. While this does not in any way affect typical operation, it *could*
lead to misleading "core show locks" output.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: mvanbaak
Tested by: murf, mvanbaak
Due to a bug that occurred when merge_contexts_and_delete scanned the "old" or existing contexts, and found a context
that doesn't exist in the new set, yet owned by a different registrar. The context is created in the new set, with the
old registrar, and and all the priorities and extens that have a different registrar are copied into it. But, not the
includes, ignorepats, and switches. I added code to do this immediately after the context is created.
This still leaves a logical hole in the code. If you define a context in two places, (eg. in extensions.conf and also
in extensions.ael), and they both have includes, but different in composition, no new context will be generated, and
therefore the 'old' includes, switches, and ignorepats will not be copied. I'd have added code to simply add any non-duplicates
into the 'new' context that had a different registrar, but there is one big complication: includes, and switches are definitely
order dependent. (ignorepats I'm not sure about). And we'll have to develop some sort of policy about how we
merge order dependent lists, especially if the intersection of the two sets is empty. (in other words, they do not have any
elements in common). Do the new go first, or the old? I've elected to punt this issue until a user complains. Hopefully,
this is pretty rare thing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when dialing a channel that does not provide progress (analog ZAP lines)
The phone does handle the double update on calls to channels that do
provide progress and wont insert duplicate items
(closes issue #12239)
Reported by: DEA
Patches:
chan_skinny-call-log.txt uploaded by DEA (license 3)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
aastra-check-cfg is the same as the other check-cfg entries,
and aastra-xml is to load a pre-configured xml script.
(closes issue #12229)
Reported by: gowen72
Patches:
aastra.patch uploaded by gowen72 (license 432)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109111 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108737 | mmichelson | 2008-03-14 11:44:08 -0500 (Fri, 14 Mar 2008) | 33 lines
Fix a race condition in the SIP packet scheduler which could cause a crash.
chan_sip uses the scheduler API in order to schedule retransmission of reliable
packets (such as INVITES). If a retransmission of a packet is occurring, then the
packet is removed from the scheduler and retrans_pkt is called. Meanwhile, if
a response is received from the packet as previously transmitted, then when we
ACK the response, we will remove the packet from the scheduler and free the packet.
The problem is that both the ACK function and retrans_pkt attempt to acquire the
same lock at the beginning of the function call. This means that if the ACK function
acquires the lock first, then it will free the packet which retrans_pkt is about to
read from and write to. The result is a crash.
The solution:
1. If the ACK function fails to remove the packet from the scheduler and the retransmit
id of the packet is not -1 (meaning that we have not reached the maximum number of
retransmissions) then release the lock and yield so that retrans_pkt may acquire the
lock and operate.
2. Make absolutely certain that the ACK function does not recursively lock the lock in
question. If it does, then releasing the lock will do no good, since retrans_pkt will
still be unable to acquire the lock.
(closes issue #12098)
Reported by: wegbert
(closes issue #12089)
Reported by: PTorres
Patches:
12098-putnopvutv3.patch uploaded by putnopvut (license 60)
Tested by: jvandal
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108583 | russell | 2008-03-13 16:38:16 -0500 (Thu, 13 Mar 2008) | 11 lines
Fix another issue that was causing crashes in chanspy. This introduces a new
datastore callback, called chan_fixup(). The concept is exactly like the
fixup callback that is used in the channel technology interface. This callback
gets called when the owning channel changes due to a masquerade. Before this
was introduced, if a masquerade happened on a channel being spyed on, the
channel pointer in the datastore became invalid.
(closes issue #12187)
(reported by, and lots of testing from atis)
(props to file for the help with ideas)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108530 | russell | 2008-03-13 16:06:33 -0500 (Thu, 13 Mar 2008) | 10 lines
Make a tweak that gets the LEDs on polycom phones to blink when an extension that
has been subscribed to goes on hold. Otherwise, they just stay on like it does
when an extension is in use.
(closes issue #11263)
Reported by: russell
Patches:
notify_hold.rev1.txt uploaded by russell (license 2)
Tested by: russell
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108531 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Though this overflow is exploitable remotely, we are NOT issuing a security
advisory for this since in order to exploit the overflow, the attacker would
have to establish an authenticated manager session AND have the system privilege.
By gaining this privilege, the attacker already has more powerful weapons at his
disposal than overflowing a buffer with a malformed manager header, so the vulnerability
in this case really lies with the authentication method that allowed the attacker to
gain the system privilege in the first place.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108469 | russell | 2008-03-13 15:26:28 -0500 (Thu, 13 Mar 2008) | 4 lines
Fix a couple uses of sprintf. The second one could actually cause an overflow
of a stack buffer. It's not a security issue though, it only depends on your
configuration.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes removes the hard coded maximum packet size of 4kB from chan_sip.
It now starts by allocating 1kB, and growing the buffer as needed to accommodate large
packets.
(closes issue #8556, reported by mikma, patch by jamesgolovich)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108439 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: ctooley
Patches:
eivr_tcp_generic.patch uploaded by jpeeler (license 325)
This change adds the ability to communicate over a TCP socket instead of forking a child process.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108288 | mmichelson | 2008-03-12 16:53:46 -0500 (Wed, 12 Mar 2008) | 14 lines
Change AST_SCHED_DEL use to ast_sched_del for autocongestion in chan_sip.
The scheduler callback will always return 0. This means that this id
is never rescheduled, so it makes no sense to loop trying to delete
the id from the scheduler queue. If we fail to remove the item from the
queue once, it will fail every single time.
(Yes I realize that in this case, the macro would exit early because the
id is set to -1 in the callback, but it still makes no sense to use
that macro in favor of calling ast_sched_del once and being done with it)
This is the first of potentially several such fixes.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #9503)
Reported by: tzafrir
Patches:
fix_cleanups uploaded by tzafrir (license 46)
zapata_sections uploaded by tzafrir (license 46)
skipchannel_options uploaded by tzafrir (license 46)
conf_sample uploaded by tzafrir (license 46)
patches updated by me to better conform to coding guidelines and fix some problems
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108286 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108227 | mmichelson | 2008-03-12 16:16:28 -0500 (Wed, 12 Mar 2008) | 12 lines
Added a large comment before the AST_SCHED_DEL macro to explain its purpose as well as when
it is appropriate and when it is not appropriate to use it.
I also removed the part of the debug message that mentions that this is probably a bug because
there are some perfectly legitimate places where ast_sched_del may fail to delete an entry (e.g.
when the scheduler callback manually reschedules with a new id instead of returning non-zero to
tell the scheduler to reschedule with the same idea). I also raised the debug level of the debug
message in AST_SCHED_DEL since it seems like it could come up quite frequently since the macro
is probably being used in several places where it shouldn't be. Also removed the redundant line,
file, and function information since that is provided by ast_log.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108238 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108086 | kpfleming | 2008-03-12 14:16:07 -0500 (Wed, 12 Mar 2008) | 6 lines
if we receive an INVITE with a Content-Length that is not a valid number, or is zero, then don't process the rest of the message body looking for an SDP
closes issue #11475
Reported by: andrebarbosa
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108135 | russell | 2008-03-12 14:57:42 -0500 (Wed, 12 Mar 2008) | 40 lines
(closes issue #12187, reported by atis, fixed by me after some brainstorming
on the issue with mmichelson)
- Update copyright info on app_chanspy.
- Fix a race condition that caused app_chanspy to crash. The issue was that
the chanspy datastore magic that was used to ensure that spyee channels did
not disappear out from under the code did not completely solve the problem.
It was actually possible for chanspy to acquire a channel reference out of
its datastore to a channel that was in the middle of being destroyed. That
was because datastore destruction in ast_channel_free() was done near the
end. So, this left the code in app_chanspy accessing a channel that was
partially, or completely invalid because it was in the process of being free'd
by another thread. The following sort of shows the code path where the race
occurred:
=============================================================================
Thread 1 (PBX thread for spyee chan) || Thread 2 (chanspy)
--------------------------------------||-------------------------------------
ast_channel_free() ||
- remove channel from channel list ||
- lock/unlock the channel to ensure ||
that no references retrieved from ||
the channel list exist. ||
--------------------------------------||-------------------------------------
|| channel_spy()
- destroy some channel data || - Lock chanspy datastore
|| - Retrieve reference to channel
|| - lock channel
|| - Unlock chanspy datastore
--------------------------------------||-------------------------------------
- destroy channel datastores ||
- call chanspy datastore d'tor ||
which NULL's out the ds' || - Operate on the channel ...
reference to the channel ||
||
- free the channel ||
||
|| - unlock the channel
--------------------------------------||-------------------------------------
=============================================================================
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108083 | file | 2008-03-12 15:26:37 -0300 (Wed, 12 Mar 2008) | 4 lines
Add a trigger mode that triggers on both read and write. The actual function that returns the combined audio frame though will wait until both sides have fed in audio, or until one side stops (such as the case when you call Wait).
(closes issue #11945)
Reported by: xheliox
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Remove some magic in unload_module that isn't needed. Module use counts
already ensure that the function isn't going to be in use at this point.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sean Bright
Terry Wilson
Mark Michelson
Michiel van Baak
Steve Murphy
Kevin P. Fleming
Joshua Colp
Jason Parker
Russell Bryant
Jeff Peeler
Tilghman Lesher