The scheduler thread that kills idle TCP connections was not registering
with PJProject properly and causing assertions if PJProject was built in
debug mode.
This change registers the thread with PJProject the first time that the
scheduler callback executes.
AST-2016-005
Change-Id: I5f7a37e2c80726a99afe9dc2a4a69bdedf661283
"Idle" here means that someone connects to us and does not send a SIP
request. PJProject will not automatically time out such connections, so
it's up to Asterisk to do it instead.
When we receive an incoming TCP connection, we will start a timer
(equivalent to transaction timer D) waiting to receive an incoming
request. If we do not receive a request in that timeframe, then we will
shut down the TCP connection.
ASTERISK-25796 #close
Reported by George Joseph
AST-2016-005
Change-Id: I7b0d303e5d140d0ccaf2f7af562071e3d1130ac6
Due to some ignored return values, Asterisk could crash if processing an
incoming REGISTER whose contact URI was above a certain length.
ASTERISK-25707 #close
Reported by George Joseph
Patches:
0001-res_pjsip-Validate-that-URIs-don-t-exceed-pjproject-.patch
AST-2016-004
Change-Id: I3ea7cee16f29c8088794de3085ca7523c1c4833d
Fix off nominal crash where we could not setup the channel to process
frames for the softmix bridge technology because of allocation failure.
Change-Id: Ic307a8386e46bf551e48fcd1eb97276714d56372
The test_voicemail_notify_endl test checks the end-of-line
characters of an email message to confirm that they are consistent.
The test wrongfully assumed that reading from the email message
into a buffer will always result in more than 1 character being
read. This is incorrect. If only 1 character was read the test
would go outside of the buffer and access other memory causing
a crash.
The test now checks to ensure that 2 or more characters are read
in ensuring the test stays within the buffer.
ASTERISK-25874 #close
Change-Id: Ic2c89cea6e90f2c0bc2d8138306ebbffd4f8b710
If try to move message to Cust1 (number 5)
the function 'save_to_folder' tries to create Greeting folder instead of Cust1.
This patch fixed it by setting GREETINGS_FOLDER = -1
ASTERISK-24927 #close
Change-Id: I03d1a761894bcc2d130ec9b003bbcddc28e25c51
* Added Useragent and RegExpire headers to AMI Event
ContactStatusDetail with associated documentation.
ASTERISK-25903 #close
Change-Id: If3d121e943e588d016ba51d4eb9c6a421a562239
The first available transport of the appropriate type is used now.
This patch adds new config option 'transport' for outbound-publish.
If transport is set then outbound PUBLISH requests will use this transport.
ASTERISK-25901 #close
Change-Id: Ib389130489b70e36795b0003fa5fd386e2680151
Contact expiration can occur in several places: res_pjsip_registrar,
res_pjsip_registrar_expire, and automatically when anyone calls
ast_sip_location_retrieve_aor_contact. At the same time, res_pjsip_registrar
may also be attempting to renew or add a contact. Since none of this was locked
it was possible for one thread to be renewing a contact and another thread to
expire it immediately because it was working off of stale data. This was the
casue of intermittent registration/inbound/nominal/multiple_contacts test
failures.
Now, the new named lock functionality is used to lock the aor during contact
expire and add operations and res_pjsip_registrar_expire now checks the
expiration with the lock held before deleting the contact.
ASTERISK-25885 #close
Reported-by: Josh Colp
Change-Id: I83d413c46a47796f3ab052ca3b349f21cca47059
There's a bug in pjproject's sip_parser where the ":" wasn't correctly
interpreted. This is causing IPv6 addresses in the "received" parameter of the
Via header to cause a syntax check failure.
This patch was submitted to Teluu on 4/10/2016.
ASTERISK-25910 #close
Reported-by: Anthony Messina
Change-Id: Ic7e4c4aa14ded61860401ec349f5177568c4d922
Locking some objects like sorcery objects can be tricky because the underlying
ao2 object may not be the same for all callers. For instance, two threads that
call ast_sorcery_retrieve_by_id on the same aor name might actually get 2
different ao2 objects if the underlying wizard had to rehydrate the aor from a
database. Locking one ao2 object doesn't have any effect on the other even if
those objects had locks in the first place.
Named locks allow access control by keyspace and key strings. Now an "aor"
named "1000" can be locked and any other thread attempting to lock "aor" "1000"
will wait regardless of whether the underlying ao2 object is the same or not.
Mutex and rwlocks are supported.
This capability will initially be used to lock an aor when multiple threads may
be attempting to prune expired contacts from it.
Change-Id: If258c0b7f92b02d07243ce70e535821a1ea7fb45
Sometimes uw-imap function 'mail_fetchbody' returns huge len
which then pass to uw-imap function 'rfc822_base64'.
uw-imap tries to allocate huge memory and abort() on fail.
This patch check the len.
If the len more than max size (128 Mbytes) log error.
This patch also set variables len, newlen to avoid uninizialezed len.
This patch also check pointer returned by rfc822_base64.
ASTERISK-25899 #close
Change-Id: I4a0e7d655f11abef6a5224e2169df6d5c1f1caca
BLF pickup isn't working on Cisco SPA and Snom phones
if the direction="recipient" attribute is missing in 'dialog' tag.
This patch adds direction="recipient" if extension state is
Ringing.
ASTERISK-24601 #close
Change-Id: I5b2c097ca29fd59e92ba237ca5d397cb1b0bcd8c
This eliminates some casts that I made a note saying v10 and above
would no longer need them.
Better late than never :)
Change-Id: I346cdb3032b6478ceb40eb6fe732978b54035572
Because SQLite doesn't support full ALTER capabilities, alembic scripts
require batch operations. However, that capability wasn't available until
0.7.0 which some distributions haven't reached yet. Therefore, the batch
operations introduced in commit 86d6e44cc (review 2319) have been reverted
and SQLite is unsupported again, for now anyway.
Tested the full upgrade and downgrade on MySQL/Mariadb and Postgresql.
ASTERISK-25890 #close
Reported-by: Harley Peters
Change-Id: I82eba5456736320256f6775f5b0b40133f4d1c80
When shutting down, the PJSIP sorcery is destroyed. The registrar
expiration module queries the PJSIP sorcery to determine what
to expire. As there was no synchronization between termination
of the expiration thread and the unloading of the module it was
possible for the thread to try to access the PJSIP sorcery after
it had been destroyed.
This change ensures that the thread is shut down before allowing
the module to be considered unloaded.
Change-Id: I69fd239edbaaf160c2d37ae00d3ac06e5596fe8b
The problem is ast_frdup() does not copy whole frame.subclass for voice,
video and image frames, only the format is copied. For video frames, the
subclass structure contains the .frame_ending flag used to put the RTP
marker where it needs to be.
ASTERISK-25894 #close
Change-Id: I812ca90e84ed5d4f473b997d0dd0d3c5a915fe33
This adds a new ARI method that allows for you to dial a channel that
you previously created in ARI.
By combining this with the create method for channels, it allows for a
workflow where a channel can be created, manipulated, and then dialed.
The channel is under control of the ARI application during all stages of
the Dial and can even be manipulated based on channel state changes
observed within an ARI application.
The overarching goal for this is to eventually be able to add a dialed
channel to a Stasis bridge earlier than the "Up" state. However, at the
moment more work is needed in the Dial and Bridge APIs in order to
facilitate that.
ASTERISK-25889 #close
Change-Id: Ic6c399c791e66c4aa52454222fe4f8b02483a205
This adds a new ARI method to the channels resource that allows for the
creation of a new channel. The channel is created and then placed into
the specified Stasis application.
This is different from the existing originate method that creates a
channel, dials it, and then places the answered channel into the
dialplan or a Stasis application. This method does not attempt to call
the channel at all. Dialing is left as a later step after channel
creation. This allows for pre-dialing channel manipulation if desired.
ASTERISK-25889
Change-Id: I3c96a0aba914b08e39f6256371a5bd4c92cbded8
This change introduces the concept of autohints. These are hints
which are created as a result of device state changes occurring within
the core. When this happens a hint will be created (if it does not
exist already) using the device name as the extension.
For example if a device state change is received for "PJSIP/bob"
and autohints are enabled on a context then a hint will exist in
that context for "bob" with a device of "PJSIP/bob".
For virtual or custom device states the name after the type will
be used. For example if the device state of "Custom:bob" changes
then a hint will exist in that context for "bob" with a device of
"Custom:bob".
This functionality can be enabled in extensions.conf by placing
"autohints=yes" in a context.
ASTERISK-25881 #close
Change-Id: I7e444c7da41b7b7d33374420fec658beeb18584e
Some SIP devices indicate hold/unhold using deferred SDP reinvites. In
other words, they provide no SDP in the reinvite.
A typical transaction that starts hold might look something like this:
* Device sends reinvite with no SDP
* Asterisk sends 200 OK with SDP indicating sendrecv on streams.
* Device sends ACK with SDP indicating sendonly on streams.
At this point, PJMedia's SDP negotiator saves Asterisk's local state as
being recvonly.
Now, when the device attempts to unhold, it again uses a deferred SDP
reinvite, so we end up doing the following:
* Device sends reinvite with no SDP
* Asterisk sends 200 OK with SDP indicating recvonly on streams
* Device sends ACK with SDP indicating sendonly on streams
The problem here is that Asterisk offered recvonly, and by RFC 3264's
rules, if an offer is recvonly, the answer has to be sendonly. The
result is that the device is not taken off hold.
What is supposed to happen is that Asterisk should indicate sendrecv in
the 200 OK that it sends. This way, the device has the freedom to
indicate sendrecv if it wants the stream taken off hold, or it can
continue to respond with sendonly if the purpose of the reinvite was
something else (like a session timer refresher).
The fix here is to alter the SDP negotiator's state when we receive a
reinvite with no SDP. If the negotiator's state is currently in the
recvonly or inactive state, then we alter our local state to be
sendrecv. This way, we allow the device to indicate the stream state as
desired.
ASTERISK-25854 #close
Reported by Robert McGilvray
Change-Id: I7615737276165eef3a593038413d936247dcc6ed
The Dial API takes responsiblity for creating an outbound channel when
calling ast_dial_append(). This commit adds a new function,
ast_dial_append_channel(), which allows us to create the channel outside
the Dial API and then to append the channel to the ast_dial structure.
This is useful for situations where the channel's creation and dialing
are distinct operations. Upcoming ARI early bridge work will illustrate
its usage.
ASTERISK-25889
Change-Id: Id8179f64f8f99132f80dead8d5db2030fd2c0509
