Initialize the calendars container before calling load_config and return FAILURE
on allocation failure. Also, use the AST_MODULE_LOAD_* values for return values.
Thanks to rmudgett for pointing out the error and the need to use the defined
values for return
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242812 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r242520 | tilghman | 2010-01-24 00:33:01 -0600 (Sun, 24 Jan 2010) | 8 lines
Only rebuild bison and flex source files on demand, if bison and flex are detected by the configure script.
Changed after discussion on the -dev list about possible unnecessary build
failures, due to checkouts/untars causing these special source files to
possibly be newer than their resulting C files. This should additionally
ensure that nobody need learn about extra Makefile arguments to ensure the
proper files get rebuilt when changes are made to these special source files.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r237405 | tilghman | 2010-01-04 12:19:00 -0600 (Mon, 04 Jan 2010) | 16 lines
Add a flag to disable the Background behavior, for AGI users.
This is in a section of code that relates to two other issues, namely
issue #14011 and issue #14940), one of which was the behavior of
Background when called with a context argument that matched the current
context. This fix broke FreePBX, however, in a post-Dial situation.
Needless to say, this is an extremely difficult collision of several
different issues. While the use of an exception flag is ugly, fixing all
of the issues linked is rather difficult (although if someone would like
to propose a better solution, we're happy to entertain that suggestion).
(closes issue #16434)
Reported by: rickead2000
Patches:
20091217__issue16434.diff.txt uploaded by tilghman (license 14)
20091222__issue16434__1.6.1.diff.txt uploaded by tilghman (license 14)
Tested by: rickead2000
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r235940 | jpeeler | 2009-12-21 13:43:41 -0600 (Mon, 21 Dec 2009) | 13 lines
Change Monitor to not assume file to write to does not contain pathing.
227944 changed the fname_base argument to always append the configured monitor
path. This change was necessary to properly compare files for uniqueness.
If a full path is given though, nothing needs to be appended and that is
handled correctly now.
(closes issue #16377)
(closes issue #16376)
Reported by: bcnit
Patches:
res_monitor.c-issue16376-1.patch uploaded by dant (license 670)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235941 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The option is global and currently the acceptable values as noted in the sample
config are accept or deny.
(closes issue #15228)
Reported by: lp0
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Classes are now tracked past removal from the core container, and module
removal is actively prevented until all references are freed.
* A hanging reference stored in the channel has been removed. This could have
caused a mismatch and the music state not properly cleared, if two or more
reloads occurred between MOH being stopped and MOH being restarted.
* In certain circumstances, duplicate classes were possible.
* A race existed at reload time between a process being killed and the thread
responsible for reading from the related pipe respawning that process.
* Several reference counts have also been corrected. At least one could have
caused deleted classes to stick around forever, consuming resources. This
originally manifested as MOH external processes that were not killed at
reload time.
(closes issue #16279, closes issue #16207)
Reported by: parisioa, dcabot
Patches:
20091202__issue16279__2.diff.txt uploaded by tilghman (license 14)
Tested by: parisioa, tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@232660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the process of swapping ULAW to a place in the extended codec space, we
found several unhandled cases, where a 32-bit integer was still being used to
handle a codec field. Most of these have been fixed with this commit, although
there is at least one case (codec_dahdi) which depends upon outside headers to
be altered before a conversion can be made.
(Fixes AST-278, SWP-459)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A thread storage variable was being freed incorrectly, which
resulted in a double free if two queries were made in the same thread.
(closes issue #16011)
Reported by: cristiandimache
Patches:
issue16011.diff uploaded by dvossel (license 671)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@229093 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* chan_console accessed pvts after deallocation.
* cdr_mysql stored a pointer that was freed by realloc()
* The module loader did not check usecount on shutdown, which led to chan_iax2
reading a timer that was already unloaded.
* The event subsystem sometimes creates an event with no IEs. Due to a corner
condition, the code would read beyond the memory boundary.
* res_pktccops did not correctly check whether its monitor thread was started.
(closes issue #16062)
Reported by: alexanderheinz
Patches:
20091109__issue16062.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@228798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r227944 | jpeeler | 2009-11-04 17:47:08 -0600 (Wed, 04 Nov 2009) | 14 lines
Fix incorrect filename comparsion after monitor file change
The logic to detect if a requested file is indeed a different file from the
current file was incorrect. The main issue being confusion of the use of
filename_base which was previously set without pathing information and then
compared to another full path. Robust file comparison logic has been added
to properly check if two files are the same even if symlinks are used.
(closes issue #15313)
Reported by: caspy
Patches:
20091103__issue15313__1.4.diff.txt uploaded by jpeeler (license 325)
but mostly tilghman's work
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a side project I've been poking at this week. The intent is to discuss
Asterisk architecture in a top down fashion to help new developers understand how
Asterisk is put together. There is a ton of stuff to write about, so this will
just continue to evolve over time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch finishes the implementation of OBJ_MULTIPLE in astobj2 (the
case where multiple results need to be returned; OBJ_NODATA mode
already was supported). In addition, it converts ast_channel_iterators
(only the targeted versions, not the ones that iterate over all
channels) to use this method.
During this work, I removed the 'ao2_flags' arguments to the
ast_channel_iterator constructor functions; there were no uses of that
argument yet, there is only one possible flag to pass, and it made the
iterators less 'opaque'. If at some point in the future someone really
needs an ast_channel_iterator that does not lock the container, we can
provide constructor(s) for that purpose.
Review: https://reviewboard.asterisk.org/r/379/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r224670 | kpfleming | 2009-10-19 18:44:07 -0500 (Mon, 19 Oct 2009) | 7 lines
Correct timestamp calculations when RTP sample rates over 8kHz are used.
While testing some endpoints that support 16kHz and 32kHz sample rates, some
log messages were generated due to calc_rxstamp() computing timestamps in a way
that produced odd results, so this patch sanitizes the result of the
computations.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CONFIRMED status doesn't imply busy or free, that is handled with the TRANSP
field. Luckily, libical already sets the is_busy status on the span for us.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This isn't the best way to do this, but it is the easiest. There are some
limitations that are going to need to be addressed at some point with reloads
and when I (or someone else) work on that, then the API can be updated to
handle passing the private config data that the calendar tech modules need in
a better way as well.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223016 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is done in such a way as to allow the driver to continue to
function with older databases which don't have these features.
(closes issue #16000)
Reported by: jamicque
Patches:
20091002__issue16000.diff.txt uploaded by tilghman (license 14)
20091002__issue16000__1.6.1.diff.txt uploaded by tilghman (license 14)
Tested by: jamicque
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This affected the ~~EXTEN~~ hack, where a subroutine might have changed the
value before it was used in the caller.
Patch by myself, tested by ebroad on #asterisk
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222152 | kpfleming | 2009-10-05 20:16:36 -0500 (Mon, 05 Oct 2009) | 20 lines
Fix ao2_iterator API to hold references to containers being iterated.
See Mantis issue for details of what prompted this change.
Additional notes:
This patch changes the ao2_iterator API in two ways: F_AO2I_DONTLOCK
has become an enum instead of a macro, with a name that fits our
naming policy; also, it is now necessary to call
ao2_iterator_destroy() on any iterator that has been
created. Currently this only releases the reference to the container
being iterated, but in the future this could also release other
resources used by the iterator, if the iterator implementation changes
to use additional resources.
(closes issue #15987)
Reported by: kpfleming
Review: https://reviewboard.asterisk.org/r/383/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222176 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221086 | twilson | 2009-09-30 09:49:11 -0500 (Wed, 30 Sep 2009) | 25 lines
Change the SSRC by default when our media stream changes
Be default, change SSRC when doing an audio stream changes Asterisk doesn't
honor marker bit when reinvited to already-bridged RTP streams,resulting in
far-end stack discarding packets with "old" timestamps that areactually part of
a new stream. This patch sends AST_CONTROL_SRCUPDATE whenever there is a
reinvite, unless the 'constantssrc' is set to true in sip.conf.
The original issue reported to Digium support detailed the following situation:
ITSP <-> Asterisk 1.4.26.2 <-> SIP-based Application Server Call comes in
fromITSP, Asterisk dials the app server which sends a re-invite back
toAsterisk--not to negotiate to send media directly to the ITSP, but to
indicatethat it's changing the stream it's sending to Asterisk. The app
servergenerates a new SSRC, sequence numbers, timestamps, and sets the marker
bit on the new stream. Asterisk passes through the teimstamp of the new stream,
butdoes not reset the SSRC, sequence numbers, or set the marker bit.
When the timestamp on the new stream is older than the timestamp on the
originalstream, the ITSP (which doesn't know there has been any change) discards
the newframes because it thinks they are too old. This patch addresses this by
changing the SSRC on a stream update unless constantssrc=true is set in
sip.conf.
Review: https://reviewboard.asterisk.org/r/374/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
JABBER_RECEIVE (along with JabberSend) makes Asterisk interact with users over
XMPP to process calls.
SendText can be used instead of JabberSend in the context of XMPP based voice
channels (chan_gtalk and chan_jingle).
(closes issue #12569)
Reported by: eech55
Tested by: phsultan, asannucci, lmadsen, jtodd, maxgo
Review: https://reviewboard.asterisk.org/r/88/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220457 65c4cc65-6c06-0410-ace0-fbb531ad65f3
gcc 4.4 has more strict rules for aliasing. It doesn't like a
struct sockaddr_in pointer pointing to a struct sockaddr. So we make it
a union.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@217445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This makes res_calendar.c compile on OpenBSD and the same
cast is used in a lot of other places where time_t type vars are used.
(closes issue #15656)
Reported by: mvanbaak
Patches:
2009081100-rescalendarcompilefix.diff.txt uploaded by mvanbaak (license 7)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@212343 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207647 | kpfleming | 2009-07-21 08:04:44 -0500 (Tue, 21 Jul 2009) | 12 lines
Ensure that user-provided CFLAGS and LDFLAGS are honored.
This commit changes the build system so that user-provided flags (in ASTCFLAGS
and ASTLDFLAGS) are supplied to the compiler/linker *after* all flags provided
by the build system itself, so that the user can effectively override the
build system's flags if desired. In addition, ASTCFLAGS and ASTLDFLAGS can now
be provided *either* in the environment before running 'make', or as variable
assignments on the 'make' command line. As a result, the use of COPTS and LDOPTS
is no longer necessary, so they are no longer documented, but are still supported
so as not to break existing build systems that supply them when building Asterisk.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@207680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the security events API. This API is to be used by
Asterisk components to report events that have security implications.
A simple example is when a connection is made but fails authentication. These
events can be used by external tools manipulate firewall rules or something
similar after detecting unusual activity based on security events.
Inside of Asterisk, the events go through the ast_event API. This means that
they have a binary encoding, and it is easy to write code to subscribe to these
events and do something with them.
One module is provided that is a subscriber to these events - res_security_log.
This module turns security events into a parseable text format and sends them
to the "security" logger level. Using logger.conf, these log entries may be
sent to a file, or to syslog.
One service, AMI, has been fully updated for reporting security events.
AMI was chosen as it was a fairly straight forward service to convert.
The next target will be chan_sip. That will be more complicated and will
be done as its own project as the next phase of security events work.
For more information on the security events framework, see the documentation
generated from doc/tex/. "make asterisk.pdf"
Review: https://reviewboard.asterisk.org/r/273/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206021 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While doing some reading about OpenSSL, I noticed a couple of things that
needed to be improved with our usage of OpenSSL.
1) We had initialization of the library done in multiple modules. This has now
been moved to a core function that gets executed during Asterisk startup.
We already link OpenSSL into the core for TCP/TLS functionality, so this
was the most logical place to do it.
2) OpenSSL is not thread-safe by default. However, making it thread safe is
very easy. We just have to provide a couple of callbacks. One callback
returns a thread ID. The other handles locking. For more information,
start with the "Is OpenSSL thread-safe?" question on the FAQ page of
openssl.org.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r201600 | russell | 2009-06-18 10:24:31 -0500 (Thu, 18 Jun 2009) | 29 lines
Fix memory corruption and leakage related reloads of non files mode MoH classes.
For Music on Hold classes that are not files mode, meaning that we are executing
an application that will feed us audio data, we use a thread to monitor the
external application and read audio from it. This thread also makes use of the
MoH class object. In the MoH class destructor, we used pthread_cancel() to ask
the thread to exit. Unfortunately, the code did not wait to ensure that the
thread actually went away. What needed to be done is a pthread_join() to ensure
that the thread fully cleans up before we proceed. By adding this one line, we
resolve two significant problems:
1) Since the thread was never joined, it never fully goes away. So, on every
reload of non-files mode MoH, an unused thread was sticking around.
2) There was a race condition here where the application monitoring thread
could still try to access the MoH class, even though the thread executing
the MoH reload has already destroyed it.
(issue #15109)
Reported by: jvandal
(issue #15123)
Reported by: axisinternet
(issue #15195)
Reported by: amorsen
(issue AST-208)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201610 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch provides a new implementation of the optional API support defined
in asterisk/optional_api.h; this new version provides solves compatibility
issues with the use of linker version scripts for suppressing global symbols.
In addition, there is now a functional (and tested!) implementation for Mac OS/X,
so module writers no longer need to use special tests before calling optional
API functions. All future implementations must provide these same semantics,
so that module writers can rely on them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the option to give a module a load priority. The value represents the order in which a module's load() function is initialized. The lower the value, the higher the priority. The value is only checked if the AST_MODFLAG_LOAD_ORDER flag is set. If the AST_MODFLAG_LOAD_ORDER flag is not set, the value will never be read and the module will be given the lowest possible priority
on load. Since some modules are reliant on a timing interface, the timing modules have been given a high load priorty.
(closes issue #15191)
Reported by: alecdavis
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/262/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move MusicOnHold, SetMusicOnHold, StartMusicOnHold, StopMusicOnHold static
documentation to the new AstXML form.
(issue #15245)
Reported by: eliel
Patches:
res_musiconhold_static_conversion.txt uploaded by lmadsen (license 10)
(with some fixes and formatting by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move function PP_EACH_USER and PP_EACH_EXTENSION documentation to the new
AstXML form.
(issue #15245)
Reported by: eliel
Patches:
res_phoneprov_static_conversion.txt uploaded by lmadsen (license 10)
(with PP_EACH_USER add by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199411 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Moved more static docs to XML (pplications and manager actions):
Monitor, StopMonitor, ChangeMonitor, PauseMonitor, UnpauseMonitor.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198661 65c4cc65-6c06-0410-ace0-fbb531ad65f3
aji_io_recv takes the maximum number of bytes to read (instead of the total
buffer size), so we have to subtract 1 from our buffer size. Without this, when
we receive packets that are larger than our buffer, iksemel will choke and
things get wonky.
(closes issue #15232)
Reported by: lp0
Patches:
05302009_res_jabber.c.patch uploaded by seanbright (license 71)
Tested by: seanbright, lp0
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198375 65c4cc65-6c06-0410-ace0-fbb531ad65f3
