This reverts commit a3a2fbaec6.
Reason for revert: There is a lot of code that relies on the broken
behavior that this fixes.
Change-Id: I410c395a0168acbdaf89e616e3cb5e1312d190cb
When an AOR is modified endpoints are updated that reference
the AOR so they can start receiving updates and reflect the
correct state. If this is the case then we shouldn't change
the endpoint to be offline if it does not reference the AOR
but instead only when the endpoint is completely updated for
all its AORs.
ASTERISK-28056
patches:
pjsip_options-aor.diff submitted by jhord (license 6978)
Change-Id: I3ee00023be2393113cd4e056599f23f3499ef164
This unit test runs through combinations of...
* Local codecs
* Remote Codecs
* Codec Preference
* Incoming/Outgoing
A few new APIs were created to make it easier to test
the functionality but didn't result in any actual
functional change.
ASTERISK_28777
Change-Id: Ic8957c43e7ceeab0e9272af60ea53f056164f164
Based on this new endpoint setting, a joint list of preferred codecs
between those received from the Asterisk core (remote), and those
specified in the endpoint's "allow" parameter (local) is created and
is used to create the outgoing SDP offer.
* Add outgoing_call_offer_pref to pjsip_configuration (endpoint)
* Add "call_direction" to res_pjsip_session.
* Update pjsip_session_caps.c to make the functions more generic
so they could be used for both incoming and outgoing.
* Update ast_sip_session_create_outgoing to create the
pending_media_state->topology with the results of
ast_sip_session_create_joint_call_stream().
* The endpoint "preferred_codec_only" option now automatically sets
AST_SIP_CALL_CODEC_PREF_FIRST in incoming_call_offer_pref.
* A helper function ast_stream_get_format_count() was added to
streams to return the current count of formats.
ASTERISK-28777
Change-Id: Id4ec0b4a906c2ae5885bf947f101c59059935437
This change provides functions that take in a JSON payload, verify that
the contents contain all the mandatory fields and required values (if
any), and signs the payload with the private key. Four fields are added
to the payload: x5u, attest, iat, and origid. As of now, these are just
placeholder values that will be set to actual values once the logic is
implemented for what to do when an actual payload is received, but the
functions to add these values have all been implemented and are ready to
use. Upon successful signing and the addition of those four values, a
ast_stir_shaken_payload is returned, containing other useful information
such as the algorithm and signature.
Change-Id: I74fa41c0640ab2a64a1a80110155bd7062f13393
If a frame handling routine returns a list of frames (vs. a single frame)
those frames are never passed to a tech's write_stream handler even if one is
available. For instance, if a codec translation occurred and that codec
returned multiple frames then those particular frames were always only sent
to the tech's "write" handler. If that tech (pjsip for example) was stream
capable then those frames were essentially ignored. Thus resulting in bad
audio.
This patch makes it so the "write_stream" handler is appropriately called
for all cases, and for all frames if available.
ASTERISK-28795 #close
Change-Id: I868faea0b73a07ed5a32c2b05bb9cf4b586f739d
The dial application had 80 characters of destination length
limitation. But this limitation causes unexpected dial string
cut if the dial string is long.
Removed unnecessary limited buffer to support longer dial
destination.
ASTERISK-27946
Change-Id: I72c8f0319a4b47e8180817a66a7e9bde063cb330
RFC5621 requires any content type with a Content-Disposition
with handling=required to be rejected with a 415 response
ASTERISK-28782 #close
Change-Id: Iad969df75936730254b95c1a8bc3b48497070bb4
named_acl.c (which is really a named_ha) now uses ast_ha_output.
I've also updated main/manager.c to output the actual ACL on "manager
show user <username>" if one is set. If this works then we can add
similar to other modules as required.
Change-Id: I0ec9876a90dddd379c80ec078d48e3ee6991eb0f
When an outgoing channel is created a list of formats may
optionally be provided which is used as a request that the
formats be used if possible. If an endpoint is not configured
for any of the formats we ignore this request and use what is
configured. This has the side effect of also including other
stream types (such as video) that were not present in the
requested formats.
This change makes it so that the intention of the request is
preserved - that is if only an audio format is requested then
even if there is no joint audio format between the request and
the configuration we will still only place an audio stream in
the outgoing call.
ASTERISK-28787
Change-Id: Ia54c0c63e94aca176169b9bae4bb8a8380ea245f
This patch makes it so ast_coredumper now outputs the following information to
a *-info.txt file when processing a core file:
asterisk version and "built by" string
BUILD_OPTS
system start, and last reloaded date/time
taskprocessor list
equivalent of "bridge show all"
equivalent of "core show channels verbose"
Also a slight modification was made when trying to obtain the pid(s) of a
running Asterisk. If it fails to retrieve any it now reports an error.
Change-Id: I54f35c19ab69b8f8dc78cc933c3fb7c99cef346b
This fixes ast_addressfamily_to_sockaddrsize to reference the
provided argument, and ast_sockaddr_from_sockaddr to not use the name of
a structure as argument.
Change-Id: Ibf5db469c47c3b4214edf8456326086174e8edd7
This commit sets up some of the initial framework for the module and
adds a way to read the private key from the specified file, which will
then be appended to the certificate object. This works fine for now, but
eventually some other structure will likely need to be used to store all
this information. Similarly, the caller_id_number is specified on the
certificate config object, but in the end we will want that information
to be tied to the certificate itself and read it from there.
A method has been added that will retrieve the private key associated
with the caller_id_number passed in. Tab completion for certificates and
stores has also been added.
Change-Id: Ic4bc1416fab5d6afe15a8e2d32f7ddd4e023295f
If a negative (error) return is received from dundi_lookup_internal,
this is not handled correctly when assigning the result to the buffer.
As such, use a signed integer in the assignment and do a proper
comparison.
ASTERISK-21205
Change-Id: I5214ebb6491e2bd14f90c7d3ce229da86888f739
When examining a stream to determine hold/unhold information we
only care about the default audio stream. Other streams aren't
used for hold/unhold.
ASTERISK-28784
Change-Id: I7a1f10f07822c4aee1f98a38b9628849b578afe4
When the Asterisk receives 200 OK with invalid SDP,
the Asterisk/PJPROJECT terminating the session.
But if the channel was in the Bridge, Asterisk tries send
the Re-Invite before terminating the session.
And when the Asterisk sending the Re-Invite, it doesn't check
the SDP is NULL or not. This crashes the Asterisk.
Fixed it to close the session correctly if the UAS sends the
200 OK with wrong SDP.
ASTERISK-28743
Change-Id: Ifa864e0e125b1a7ed2f3abd4164187e1dddc56da
This patch has been included in Gentoo distribution for at least since
asterisk 1.8, but there are references in the logs going back as far as
1.0.0 - not sure if this is still required in any way, it does apply,
and it doesn't (as far as we can determine) cause build failures.
Change-Id: I46d8845e30200205e80580680bf060aa3012ba54
We (Gentoo distribution) reckon that in the case of multiple versions of
gmime installed we should prefer the newest one.
Change-Id: Idf7be613230232eb1d573d93c4a5a8297f4ecd2d
The state of the default audio stream is used for hold/unhold so we
restrict it to sendrecv as the core does not handle when it changes as
a result of hold/unhold.
This restriction does not apply to other media types though so we now
only restrict it to audio. This allows the other default streams to
store their state at all values, and not just sendrecv and removed.
ASTERISK-28783
Change-Id: I139740f38cea7f7d92a876ec2631ef50681f6625
Do not hang up a PJSIP channel on RTP timeout if that channel is in
a direct-media bridge. Also reset the time of the last received RTP packet when
direct-media ends (wait full rtp_timeout period before checking first time after
audio came back to Asterisk).
ASTERISK-28774
Reported-by: Michael Neuhauser
Change-Id: I8b62012be7685849e8fb2b1c5dd39d35313ca2d1
A pure blacklist is not good enough, we need a whitelist mechanism as
well, and the simplest way to do that is to re-use existing ACL
infrastructure.
This makes it simpler to blacklist say an entire block (/24) except a
smaller block (eg, a /29 or even a /32). Normally you'd need to
recursively split the block, so if you want to blacklist a /24 except
for a /29 you'd end up with a blacklit for a /25, /26, /27 and /28. I
feel that having an ACL instead of a blacklist only is clearer.
Change-Id: Id57a8df51fcfd3bd85ea67c489c85c6c3ecd7b30
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
binutils 2.34 merged this commit:
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;\
h=fd3619828e94a24a92cddec42cbc0ab33352eeb4
Which effectively does things like:
-#define bfd_section_size(bfd, ptr) ((ptr)->size)
-#define bfd_get_section_size(ptr) ((ptr)->size)
+#define bfd_section_size(sec) ((sec)->size)
So in order to remain backwards compatible we need to detect this API
change, and adjust accordingly. The simplest is to notice that the
bfd_get_section_size and bfd_get_section_vma MACROs are no longer
defined, and define then onto the new API. The alternative is to litter
the code with a number of #ifdef #else #endif splatters right through
the code.
Change-Id: I3efe0f8e8f3e338d16fcbc2b26a505367b6e172f
Fixes the following compile error:
chan_vpb.cc:2688:26: error: catching polymorphic type
‘class std::exception’ by value
Change-Id: Ic87bc357d72427d77626735c83200fd278a7a649
Given a scenario where MixMonitor was initiated over AMI it
was possible for the channel and MixMonitor thread to remain
alive past hang up of the channel. This scenario required
the AMI initiated MixMonitor to retrieve the channel, a
hangup to occur on the channel in another thread, and then
for MixMonitor to actually start. If this occurred the
MixMonitor thread would remain alive indefinitely and
the channel reference would remain.
This change ensures that audiohooks are never able to
be attached to channels that have been hung up. An
additional fix has also been done in app_mixmonitor to
properly release the channel reference if this occurs.
ASTERISK-28780
Change-Id: I8044c06daa06f0f16607788c596f55623be26f58
This is a generic jenkinsfile to build Asterisk and optionally
perform one or more of the following:
* Publish the API docs to the wiki
* Run the Unit tests
* Run Testsuite Tests
This job can be triggered manually from Jenkins or be triggered
automatically on a schedule based on a cron string.
Change-Id: Id9d22a778a1916b666e0e700af2b9f1bacda0852
bridge_p2p_rtp_write will forward rtp to the bridged rtp instance
without modifying the ssrc. However, it is not updating the SSRC
in the bridged rtp. Thus, when SSRC packets are generated, they
have the correct SSRC for the sender.
ASTERISK-28773 #close
Change-Id: I39f923bde28ebb4f0fddc926b92494aed294a478
If ICE support is enabled but not negotiated, the rtp->ice structure is
not being destroyed. This leads to Asterisk waiting for ICE to complete
instead of immediately starting the DTLS handshake, resulting in the
call leg having no RTP.
ASTERISK-28769 #close
Change-Id: I17c137546dc9ecfb9583c24dcf4c2ced8bbd7a27
If the SSRC of a received RTP packet differed from the previous SSRC
an SSRC change control frame would be queued ahead of the media
frame. In the case of audio this would result in the format of the
audio frame not being checked, and if it differed or was not allowed
then it could cause the call to drop due to failure to set up a
translation path.
The chan_pjsip module will now no longer assume the first frame
will be the audio frame and instead goes through the complete list
to find it.
ASTERISK-28759
Change-Id: I6d854cc523f343e299a615636fc65bdbd5f809ec
A regular expression in a NAPTR response record can have a trailing
'i' flag to indicate that the expression should be evaluated in a
case-insensitive way. We were not checking for that flag which caused
the record parsing to fail on otherwise valid input.
Although this change will initially go into Asterisk 13, 16, and 17,
it is my intention to replace the majority of this code in 16 and up -
including this fix - by changing enum.c to consume the new DNS API
which duplicates most of this logic already. Asterisk 13 doesn't have
the DNS API, so this fix will be as good as it gets.
ASTERISK-26711 #close
Reported by: Vitold
Change-Id: I33943a5b3e7539c6dca3a5079982ee15a08186f0
This change introduce a CLI command for the RTP to display the general
configuration.
In the first step add the follow fields of the configurations:
- rtpstart
- rtpend
- dtmftimeout
- rtpchecksum
- strictrtp
- learning_min_sequential
- icesupport
Change-Id: Ibe5450898e2c3e1ed68c10993aa1ac6bf09b821f
The ast_get_txt() API function (and by extension, the TXTCIDNAME
dialplan function) were broken in
65b8381550 such that we would never
actually make a DNS TXT query as described.
This patch restores the documented behavior.
ASTERISK-19460 #close
Reported by: George Joseph
Change-Id: I1b19aea711488cb1ecd63843cddce05010e39376
traud
Sean Bright
Jaco Kroon
Joshua C. Colp
George Joseph
Ben Ford
Kevin Harwell
sungtae kim
Torrey Searle
Michael Neuhauser
Paulo Vicentini
Jared Smith
Rodrigo Ramírez Norambuena