Remove MWI's dependency on the event system by moving it to
Stasis-core. This also introduces forwarding topic pools in Stasis-core
which aggregate many dynamically allocated topics into a single primary
topic.
Review: https://reviewboard.asterisk.org/r/2368/
(closes issue ASTERISK-21097)
Patch-by: Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was essentially duplicated functionality where normal channels used
AST_CAUSE_ANSWERED_ELSEWHERE while local channels and queues used
AST_FLAG_ANSWERED_ELSEWHERE. This removes the flag and converts that usage
into AST_CAUSE_ANSWERED_ELSEWHER usage.
Review: https://reviewboard.asterisk.org/r/1944
(closes issue ASTERISK-19865)
Patch-by: Birger Harzenetter
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* chan_mobile: Fixed an overrun where the cind_state buffer (an integer array
of size 16) would be overrun due to improper bounds checking. At worst, the
buffer can be overrun by a total of 48 bytes (assuming 4-byte integers),
which would still leave it within the allocated memory of struct hfp. This
would corrupt other elements in that struct but not necessarily cause any
further issues.
* app_sms: The array imsg is of size 250, while the array (ud) that the data
is copied into is of size 160. If the size of the inbound message is
greater then 160, up to 90 bytes could be overrun in ud. This would corrupt
the user data header (array udh) adjacent to ud.
* chan_unistim: A number of invalid memmoves are corrected. These would move
data (which may or may not be valid) into the ends of these buffers.
* asterisk: ast_console_toggle_loglevel does not check that the console log
level being set is less then or equal to the allowed log levels of 32.
* format_pref: In ast_codec_pref_prepend, if any occurrence of the specified
codec is not found, the value used to index into the array pref->order
would be one greater then the maximum size of the array.
* jitterbuf: If the element being placed into the jitter buffer lands in the
last available slot in the jitter history buffer, the insertion sort attempts
to move the last entry in the buffer into one slot past the maximum length
of the buffer. Note that this occurred for both the min and max jitter
history buffers.
* tdd: If a read from fsk_serial returns a character that is greater then 32,
an attempt to read past one of the statically defined arrays containing the
values that character maps to would occur.
* localtime: struct ast_time and tm are not the same size - ast_time is larger,
although it contains the elements of tm within it in the same layout. Hence,
when using memcpy to copy the contents of tm into ast_time, the size of tm
should be used, as opposed to the size of ast_time.
* extconf: this treats ast_timing's minmask array as if it had a length of 48,
when it has defined the size of the array as 24. pbx.h defines minmask as
having a size of 48.
(issue ASTERISK-19668)
Reported by: Matt Jordan
........
Merged revisions 362485 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362496 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added ability to use multiple lines on phone, so for one device in configuration multiple lines can be defined, it allows to have multiple calls on one phone, callwaiting and switching between calls.
* Added ability for translation on-screen menu to multiple languages. Tested on Russian languages. Supported encodings: ISO 8859-1, ISO 8859-2, ISO 8859-4, ISO 8859-5, ISO 2022-JP. Language controlled by 'language' and on-screen menu of phone
* Other described in CHANGES file
Testing done by issue tracker users: ibercom, scsiborg, idarwin, TeknoJuce, c0rnoTa.
Tested on production system by Jonn Taylor (jonnt) using phone models: Nortel i2004, 1120E and 1140E.
(closes issue ASTERISK-16890)
Review: https://reviewboard.asterisk.org/r/1243/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continue channel opaque-ification by wrapping all of the stringfields.
Eventually, we will restrict what can actually set these variables, but
the purpose for now is to hide the implementation and keep people from
adding code that directly accesses the channel structure. Semantic
changes will follow afterward.
Review: https://reviewboard.asterisk.org/r/1661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r335078 | mjordan | 2011-09-09 11:27:01 -0500 (Fri, 09 Sep 2011) | 29 lines
Merged revisions 335064 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335064 | mjordan | 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) | 23 lines
Updated SIP 484 handling; added Incomplete control frame
When a SIP phone uses the dial application and receives a 484 Address
Incomplete response, if overlapped dialing is enabled for SIP, then
the 484 Address Incomplete is forwarded back to the SIP phone and the
HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete
application dialplan logic was automatically triggered; now, explicit
dialplan usage of the application is required.
Additionally, this patch adds a new AST_CONTOL_FRAME type called
AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame,
it is an indication that the dialplan expects more digits back from the
device. If the device supports overlap dialing it should attempt to
notify the device that the dialplan is waiting for more digits; otherwise,
it can handle the frame in a manner appropriate to the channel driver.
(closes issue ASTERISK-17288)
Reported by: Mikael Carlsson
Tested by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/1416/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335079 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317478 | russell | 2011-05-05 17:53:45 -0500 (Thu, 05 May 2011) | 12 lines
Fix some consistency issues with jitterbuffer config.
Store the defaults noted in the sample config files in the jitterbuffer config
data structure. This makes the CLI commands that output these settings show
the right thing. Also only show the settings that are relevant in the settings
CLI commands, based on which jitterbuffer is selected and whether it's enabled.
(closes issue #19083)
Reported by: rgagnon
Patches:
issue-19083-trunk-r313139.diff uploaded by rgagnon (license 1202)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When configuring the adaptive jitterbuffer, the target_extra
value not only could not be set from the configuration, but was
not even being set to its proper default. This value is required
in order for the adaptive jitterbuffer to work correctly. To resolve
this a config option has been added to expose this value to the conf
files, and a default value is provided when no config specific value
is present.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the process of swapping ULAW to a place in the extended codec space, we
found several unhandled cases, where a 32-bit integer was still being used to
handle a codec field. Most of these have been fixed with this commit, although
there is at least one case (codec_dahdi) which depends upon outside headers to
be altered before a conversion can be made.
(Fixes AST-278, SWP-459)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a crash reported in #asterisk-dev where chan_mgcp unexpectedly
allocated an RTP instance from res_rtp_multicast, since by not specifying an
engine, you get the first one in the list of engines.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@211732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
