The code for gathering contacts could result in the same contact
being retrieved and added to the list multiple times. The container
which stores the contacts to display will now only allow a contact
to be added to it once instead of multiple times.
ASTERISK-28228
Change-Id: I805185cfcec03340f57d2b9e6cc43c49401812df
We now check that a body exists and it has a length > 0 before
attempting to process it.
ASTERISK-28447
Reported-by: Gil Richard
Change-Id: Ic469544b22ab848734636588d4c93426cc6f4b1f
The MWI core recently got some new API calls that make tracking MWI state
lifetime more reliable. This patch updates those modules that subscribe to
specific MWI topics to use the new API. Specifically, these modules now
subscribe to both MWI topics and MWI state.
ASTERISK-28442
Change-Id: I32bef880b647246823dbccdf44a98d384fcabfbd
Currently, DELETE /ari/channels/<channelID> supports only few hangup reasons.
It's good enough for simple use, but when it needs to set the detail reason,
it comes challenges.
Added reason_code query parameter for that.
ASTERISK-28385
Change-Id: I1cf1d991ffd759d0591b347445a55f416ddc3ff2
According T.38 Gateway 'Use case 3'
https://wiki.asterisk.org/wiki/display/AST/T.38+Gateway
T.38 Gateway should send T.38 negotiation request to called endpoint
if FAX preamble (using V.21 detector) generated by called endpoint.
But it does not, because fax_gateway_detect_v21 constructs T.38
negotiation request, but forwards it only to other channel,
not to the channel on which FAX preamble is detected.
Some SIP endpoints could be improperly configured to rely on the other side
to initiate T.38 re-INVITEs.
With this patch the T.38 Gateway tries to negotiate with both sides
by sending T.38 negotiation request to both endpoints supported T.38.
Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39
This change adds support for larger TLS certificates by allowing
OpenSSL to fragment the DTLS packets according to the configured
MTU. By default this is set to 1200.
This is accomplished by implementing our own BIO method that
supports MTU querying. The configured MTU is returned to OpenSSL
which fragments the packet accordingly. When a packet is to be
sent it is done directly out the RTP instance.
ASTERISK-28018
Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06
The change #10017 "Handle fax gateway being started more than once"
introdiced a bug which leads to segfault in res_fax_spandsp.
The res_fax_spandsp module does not support reserving sessions, so
fax_session_reserve returns a fax session with state AST_FAX_STATE_INACTIVE.
The fax_gateway_start does not create a real fax session if the fax session
is already present and the state is not AST_FAX_STATE_RESERVED.
But the "reserved" session created for res_fax_spandsp has state
AST_FAX_STATE_INACTIVE, so fax_gateway_start not starting.
Then when fax_gateway_framehook is called and gateway T.38 state is
NEGOTIATED the call of gateway->s->tech->write(gateway->s, f) leads to
segfault, because session tech_pvt is not set, i.e. the tech session
was not initialized/started.
This patch adds check also on AST_FAX_STATE_INACTIVE to the "reserved"
session created for res_fax_spandsp will start.
This patch also adds extra check and log ERROR if tech_pvt is not set
before call tech->write.
ASTERISK-27981 #close
Change-Id: Ife3e65e5f18c902db2ff0538fccf7d28f88fa803
This patch adds a channel name to output of CLI 'fax show session'
and also expands the channel name field up to 30 characters on
CLI 'fax show sessions'
Change-Id: Id059c43ff41811f5e76712b83fb63b8f246da953
When monitoring Asterisk instances, it's often useful to know when an
outbound registration fails, as this often maps to the notion of a trunk
and having a trunk fail is usually a "bad thing". As such, this patch
adds monitoring metrics that track the state of PJSIP outbound registrations.
It does this by looking for the Registry events coming across the Stasis
system topic, and publishing those as metrics to Prometheus. Note that
while this may support other outbound registration types (IAX2, SIP, etc.)
those haven't been tested. Your mileage may vary.
(And why are you still using IAX2 and SIP? It's 2019 folks. Get with the
program.)
This patch also adds Sorcery observers to handle modifications to the
underlying PJSIP outbound registration objects. This is useful when a
reload is triggered that modifies the properties of an outbound registration,
or when ARI push configuration is used and an object is updated or
deleted. Because we rely on properties of the registration object to
define the metric (label key/value pairs), we delete the relevant metric when
we notice that something has changed and wait for a new Stasis message to
arrive to re-create the metric.
ASTERISK-28403
Change-Id: If01420e38530fc20b6dd4aa15cd281d94cd2b87e
This patch adds a few CLI commands to the res_prometheus module to aid
system administrators setting up and configuring the module. This includes:
* prometheus show status: Display basic statistics about the Prometheus
module, including its essential configuration, when it was last scraped,
and how long the scrape took. The last two bits of information are useful
when Prometheus isn't generating metrics appropriately, as it will at
least tell you if Asterisk has had its HTTP route hit by the remote
server.
* prometheus show metrics: Dump the current metrics to the CLI. Useful for
system administrators to see what metrics are currently available without
having to cURL or go to Prometheus itself.
ASTERISK-28403
Change-Id: Ic09813e5e14b901571c5c96ebeae2a02566c5172
This patch adds basic Asterisk bridge statistics to the res_prometheus
module. This includes:
* asterisk_bridges_count: The current number of bridges active on the
system.
* asterisk_bridges_channels_count: The number of channels active in a
bridge.
In all cases, enough information is provided with each bridge metric
to determine a unique instance of Asterisk that provided the data, along
with the technology, subclass, and creator of the bridge.
ASTERISK-28403
Change-Id: Ie27417dd72c5bc7624eb2a7a6a8829d7551788dc
This patch adds basic Asterisk endpoint statistics to the res_prometheus
module. This includes:
* asterisk_endpoints_state: The current state (unknown, online, offline)
for each defined endpoint.
* asterisk_endpoints_channels_count: The current number of channels
associated with a given endpoint.
* asterisk_endpoints_count: The current number of defined endpoints.
In all cases, enough information is provided with each endpoint metric
to determine a unique instance of Asterisk that provided the data, as well
as the underlying technology and resource definition.
ASTERISK-28403
Change-Id: I46443963330c206a7d12722d08dcaabef672310e
Using timestamp with signed int will cause timestamps exceeding max value
to be negative.
This causes the jitterbuffer to do passthrough of the packet.
ASTERISK-28421
Change-Id: I9dabd0718180f2978856c50f43aac4e52dc3cde9
This patch adds basic Asterisk channel statistics to the res_prometheus
module. This includes:
* asterisk_calls_sum: A running sum of the total number of
processed calls
* asterisk_calls_count: The current number of calls
* asterisk_channels_count: The current number of channels
* asterisk_channels_state: The state of any particular channel
* asterisk_channels_duration_seconds: How long a channel has existed,
in seconds
In all cases, enough information is provided with each channel metric
to determine a unique instance of Asterisk that provided the data, as
well as the name, type, unique ID, and - if present - linked ID of each
channel.
ASTERISK-28403
Change-Id: I0db306ec94205d4f58d1e7fbabfe04b185869f59
Prometheus is the defacto monitoring tool for containerized applications.
This patch adds native support to Asterisk for serving up Prometheus
compatible metrics, such that a Prometheus server can scrape an Asterisk
instance in the same fashion as it does other HTTP services.
The core module in this patch provides an API that future work can build
on top of. The API manages metrics in one of two ways:
(1) Registered metrics. In this particular case, the API assumes that
the metric (either allocated on the stack or on the heap) will have
its value updated by the module registering it at will, and not
just when Prometheus scrapes Asterisk. When a scrape does occur,
the metrics are locked so that the current value can be retrieved.
(2) Scrape callbacks. In this case, the API allows consumers to be
called via a callback function when a Prometheus initiated scrape
occurs. The consumers of the API are responsible for populating
the response to Prometheus themselves, typically using stack
allocated metrics that are then formatted properly into strings
via this module's convenience functions.
These two mechanisms balance the different ways in which information is
generated within Asterisk: some information is generated in a fashion
that makes it appropriate to update the relevant metrics immediately;
some information is better to defer until a Prometheus server asks for
it.
Note that some care has been taken in how metrics are defined to
minimize the impact on performance. Prometheus's metric definition
and its support for nesting metrics based on labels - which are
effectively key/value pairs - can make storage and managing of metrics
somewhat tricky. While a naive approach, where we allow for any number
of labels and perform a lot of heap allocations to manage the information,
would absolutely have worked, this patch instead opts to try to place
as much information in length limited arrays, stack allocations, and
vectors to minimize the performance impacts of scrapes. The author of
this patch has worked on enough systems that were driven to their knees
by poor monitoring implementations to be a bit cautious.
Additionally, this patch only adds support for gauges and counters.
Additional work to add summaries, histograms, and other Prometheus
metric types may add value in the future. This would be of particular
interest if someone wanted to track SIP response types.
Finally, this patch includes unit tests for the core APIs.
ASTERISK-28403
Change-Id: I891433a272c92fd11c705a2c36d65479a415ec42
You can now add the "include_local_address" flag to an entry in
rtp.conf "[ice_host_candidates]" to include both the advertized
address and the local address in ICE negotiation:
[ice_host_candidates]
192.168.1.1 = 1.2.3.4,include_local_address
This causes both 192.168.1.1 and 1.2.3.4 to be advertized.
Change-Id: Ide492cd45ce84546175ca7d557de80d9770513db
This change fixes two bugs which both resulted in the packet loss
count exceeding 65,000.
The first issue is that the sequence number check to determine if
cycling had occurred was using the wrong variable resulting in the
check never seeing that cycling has occurred, throwing off the
packet loss calculation. It now uses the correct variable.
The second issue is that the packet loss calculation assumed that
the received number of packets in an interval could never exceed
the expected number. In practice this isn't true due to delayed
or retransmitted packets. The expected will now be updated to
the received number if the received exceeds it.
ASTERISK-28379
Change-Id: If888ebc194ab69ac3194113a808c414b014ce0f6
When multiple endpoints try to register close together using the same
AOR with qualify_frequency set, one contact would qualify immediately
while the other contacts would have to wait out the duration of the
timer before being able to qualify. Changing the conditional to check
the contact container count for a non-zero value allows all contacts to
qualify immediately.
Change-Id: I79478118ee7e0d6e76af7c354d66684220db9415
When we use early bridge with create and dial from stasis using Local channel
and the dialplan does not any entry the it is returned from core_local.c with
No such extension .
In such case asterisk locks up till the channel is not hangup with the error
Exceptionally long voice queue length
* Found that in such case app_control_dial fails on ast_call method and
return -1
* Since it is called from stasis_app_send_command_async and return -1 does
not cause resources to be freed and since no PBX exist it is not able to
read from channel causing exceptionally long queue
* After putting this code found that the channel was releasing immediately
and resources were freed.
ASTERISK-28399
Reported by: Abhay Gupta
Tested by: Abhay Gupta
Change-Id: I0a55c923fc6995559f808d63b9488762b4489318
Updated ast_sip_create_rdata_with_contact and registrar_find_contact
to check the return from pjsip_parse_uri before attempting to
use the uri returned.
ASTERISK-28402
Reported-by: Ross Beer
Change-Id: I9810b3b163c45ed5a56ec743586e5ce107f13ba7
The dial bridge is meant to hold channels which have been created
and dialed in stasis. It handles the frames coming from them and raises
the appropriate events.
It was possible for the code to mistakenly place calls which came
from the dialplan into the dial bridge if they were not in an
answered state. These channels are not outgoing channels and
should not be placed into the dial bridge.
The code now checks to ensure that only stasis created channels are
placed into the dial bridge by checking that a PBX does not exist
on the channel.
ASTERISK-27756
Change-Id: Ideee69ff06c9a0b31f7ed61165f5c055f51d21b6
The transport-cc draft is a mechanism by which additional information
about packet reception can be provided to the sender of packets so
they can do sender side bandwidth estimation. This is accomplished
by having a transport specific sequence number and an RTCP feedback
message. This change implements this in the receiver direction.
For each received RTP packet where transport-cc is negotiated we store
the time at which the RTP packet was received and its sequence number.
At a 1 second interval we go through all packets in that period of time
and use the stored time of each in comparison to its preceding packet to
calculate its delta. This delta information is placed in the RTCP
feedback message, along with indicators for any packets which were not
received.
The browser then uses this information to better estimate available
bandwidth and adjust accordingly. This may result in it lowering the
available send bandwidth or adjusting how "bursty" it can be.
ASTERISK-28400
Change-Id: I654a2cff5bd5554ab94457a14f70adb71f574afc
There is enough MWI functionality to warrant it having its own 'c' and header
files. This patch moves all current core MWI data structures, and functions
into the following files:
main/mwi.h
main/mwi.c
Note, code was simply moved, and not modified. However, this patch is also in
preparation for core MWI changes, and additions to come.
Change-Id: I9dde8bfae1e7ec254fa63166e090f77e4d3097e0
Added a new PJSIP global setting called norefersub.
Default is true to keep support working as before.
res_pjsip_refer: Configures PJSIP norefersub capability accordingly.
Checks the PJSIP global setting value.
If it is true (default) it adds the norefersub capability to PJSIP.
If it is false (disabled) it does not add the norefersub capability
to PJSIP.
This is useful for Cisco switches that do not follow RFC4488.
ASTERISK-28375 #close
Reported-by: Dan Cropp
Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9
An earlier contributor apparently forgot to run 'make ari-stubs'
before committing after making ARI model changes.
Change-Id: I7813e5638e2821d11f4b968dc2aeab4f725190a6
Reset the internal counter that the AEL2 compiler uses for unique label
names before compiling. This keeps dialplan labels consistent across
reloads assuming the AEL2 has not changed.
ASTERISK-17799 #close
Reported by: Kirill Katsnelson
Change-Id: I30b3cc887d1ee0644d3f341e2fef16f525d7fae5
In AEL2, if a 'for' statement contains macro* calls, like:
for (&iterator(${TRY},A); "${A}" != ""; &iterate(A)) {
The AEL2 parser will translate these into calls to the deprecated Macro
dialplan application and use the antiquated pipe delimiter.
Instead, convert these into calls to the Gosub dialplan application and
use commas as argument separators.
ASTERISK-18593 #close
Reported by: Luke-Jr
* 'macro' in this context means AEL2 macros, not the 'Macro' application
Change-Id: I3d73716033b8e3e42e0209d355bf5f10c97045fc
When generating the regular expression that matches against existing
extensions, we need to escape literal characters that can also be
regular expression metacharacters. This was already being done for '*'
but we need to do the same for '+'.
In passing, remove some unreachable code - strcmp() is already run
immediately when entering extension_matches().
ASTERISK-14939 #close
Reported by: klaus3000
Change-Id: I8d2cccb3479168fba1b0a6704c52198b396468f1
REMB's exponent is 6-bits (0..63) and has a mantissa of 18-bits. We were using
an unsigned integer to represent the bitrate. However, that type is not large
enough to hold all potential bitrate values. If the bitrate is large enough
bits were being shifted off the "front" of the mantissa, which caused the
wrong value to be sent to the browser.
This patch makes it so it now uses a float type to hold the bitrate. Using a
float allows for all bitrate values to be correctly represented.
ASTERISK-28255
Change-Id: Ice00fdd16693b16b41230664be5d9f0e465b239e
It looks like we're not properly calculating jitter values on received
video streams. This patch enables the code that does jitter calculations
for those streams.
Change-Id: Iaac985808829c8f034db8c57318789c4c8c11392
It was difficult to check the channel's current application and
parameters using ARI for current channels. Added app_name, app_data
items to show the current application information.
ASTERISK-28343
Change-Id: Ia48972b3850e5099deab0faeaaf51223a1f2f38c
If Realtime @ variable value is NULL or empty or contains only whitespaces
then when we try to retrieve it using PJSIP_ENDPOINT we get WARNING
pjsip_endpoint_function_read: Unknown property @my_var for PJSIP endpoint.
And the variable is missing in the result of CLI pjsip show endpoint.
This patch keeps empty sorcery extended field.
ASTERISK-28341 #close
Change-Id: I221fccc04cbfa2be17ce971f64ae0e74e465eea0
Because StasisEnd's timestamp created it's own timestamp, it makes
wrong timestamp, compare to other channel event(ChannelDestroyed).
Fixed to getting a timestamp from the Channel's timestamp.
ASTERISK-28333
Change-Id: I5eb8380fc472f1100535a6bc4983c64767026116
As part of an earlier voicemail refactor, ast_delete_mwi_state_full
was modified to remove the pool topic for a mailbox when the state
was deleted. This was an attempt to prevent stale topics from
accumulating when app_voicemail was reloaded and a mailbox went
away. Unfortunately because of the fact that when app_voicemail
reloads, ALL mailboxes are deleted then only current ones recreated,
topics were being removed from the pool that still had subscribers
on them, then recreated as new topics of the same name. So now
modules like res_pjsip_mwi are listening on a topic that will
never receive any messages because app_voicemail is publishing on
a different topic that happens to have the same name. The solutiuon
to this is not easy and given that accumulating topics for
deleted mailboxes is less evil that not sending NOTIFYs...
* Removed the call to stasis_topic_pool_delete_topic in
ast_delete_mwi_state_full.
Also:
* Fixed a topic reference leak in res_pjsip_mwi
mwi_stasis_subscription_alloc.
* Added some debugging to mwi_stasis_subscription_alloc,
stasis_topic_create, and topic_dtor.
* Fixed a topic reference leak in an error path in
internal_stasis_subscribe.
ASTERISK-28306
Reported-by: Jared Hull
Change-Id: Id7da0990b3ac4be4b58491536b35f41291247b27
Added ARI resource for channel statistics.
GET /ari/channels/{channelId}/rtp_statistics : It returns given
channel's rtp statistics detail.
ASTERISK-28320
Change-Id: I4343eec070438cec13f2a4f22e7fd9e574381376
Changed to requirement to having timestamp for all of ARI events.
The below ARI events were changed to having timestamp.
PlaybackStarted, PlaybackContinuing, PlaybackFinished,
RecordingStarted, RecordingFinished, RecordingFailed,
ApplicationReplaced, ApplicationMoveFailed
ASTERISK-28326
Change-Id: I382c2fef58f5fe107e1074869a6d05310accb41f
Topic names now follow: <subsystem>:<functionality>[/<object>]
This ensures that they are all unique, and also provides better
insight in to what each topic is for.
Subscriber ids now also use the main topic name they are
subscribed to and an incrementing integer as their identifier to
make it easier to understand what the subscription is primarily
responsible for.
Both the CLI commands for listing topic and subscription statistics
now sort to make it a bit easier to see what is going on.
Subscriptions will now show all topics that they are receiving messages
from, not just the main topic they were subscribed to.
ASTERISK-28335
Change-Id: I484e971a38c3640f2bd156282e532eed84bf220d
Currently, when the Asterisk calculates rtp statistics, it uses
sample_count as a unsigned integer parameter. This would be fine
for most of cases, but in case of large enough number of sample_count,
this might be causing the divide by zero error.
ASTERISK-28321
Change-Id: If7e0629abaceddd2166eb012456c53033ea26249
chan_sip will always ignore 183 responses that do not contain SDP
however, chan_pjsip will currently always translate it into a
183 with SDP. This new flag allows chan_pjsip to have the same
behavior as chan_sip.
ASTERISK-28322 #close
Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a
strtok() uses a static buffer, making it not thread safe.
Also add a #define to cause a compile failure if strtok is used.
Change-Id: Icce265153e1e65adafa8849334438ab6d190e541
Added the ability to move between Stasis applications within Stasis.
This can be done by calling 'move' in an application, providing (at
minimum) the channel's id and the application to switch to. If the
application is not registered or active, nothing will happen and the
channel will remain in the current application, and an event will be
triggered to let the application know that the move failed. The event
name is "ApplicationMoveFailed", and provides the "destination" that the
channel was attempting to move to, as well as the usual channel
information. Optionally, a list of arguments can be passed to the
function call for the receiving application. A full example of a 'move'
call would look like this:
client.channels.move(channelId, app, appArgs)
The control object used to control the channel in Stasis can now switch
which application it belongs to, rather than belonging to one Stasis
application for its lifetime. This allows us to use the same control
object instead of having to tear down the current one and create
another.
ASTERISK-28267 #close
Change-Id: I43d12b10045a98a8d42541889b85695be26f288a
This small feature will help to checking the bridge's status to
figure out which bridge is in old/zombie or not. Also added
detail items for the 'bridge show *' cli to provide more detail
info. And added creation item to the ARI as well.
ASTERISK-28279
Change-Id: I460238c488eca4d216b9176576211cb03286e040
PJSIP assumes that these header names are not allocated, and does not
clone the name strings when reusing headers.
Block unload of res_pjsip_diversion until shutdown to ensure static
memory stays valid.
ASTERISK-28312 #close
Change-Id: Ibd6ea55ec4a604bbd43ac07f8d0b54da2c39b8b9
Rather than calling ast_odbc_find_table() in the prepare callback, call
it beforehand and pass it in to the callback to avoid the need for a
second connection.
ASTERISK-28166 #close
Change-Id: I6f8a0b9990d636fd6bc1a92ed70f7050d2436202
apply_negotiated_sdp_stream was returning a "1" when no joint
capabilities were found on an outgoing call instead of a "-1".
This indicated to res_pjsip_session that the handler DID handle
the sdp when in fact it didn't. Without the appropriate setup,
a subsequent media frame coming in would have an invalid stream_num
and cause a seg fault when the stream was attempted to be retrieved.
apply_negotiated_sdp_stream now returns the correct "-1" and any
media is now discarded before it reaches the core stream processing.
ASTERISK-28260
Reported by: Sotiris Ganouris
Change-Id: Ia095cb16b4862f2f6ad6d2d2a77453fa2542371f
This reverts commit d524ad523d.
Reason for revert: This causes Contact and Via headers to have the wrong
transport address.
ASTERISK-28309 #close
Change-Id: Ibba4d6176f68e39279fcd9a545f81d56e747bed8
If both send_registrations and send_auth are both set to yes,
outbound_auth/username must be set or we crash.
ASTERISK-27992 #close
Change-Id: I6418d56de1ae53f80393b314c2584048fbf7f11d
When a contact was removed by the registrar it did not always check to see if
the circumstances involved a monitored reliable transport. For instance, if the
'remove_existing' option was set to 'true' then when existing contacts were
removed due to 'max_contacts' being reached, those existing contacts being
removed did not unregister the transport monitor.
Also, it was possible to add more than one monitor on a reliable transport for
a given aor and contact.
This patch makes it so all contact removals done by the registrar also remove
any associated transport monitors if necessary. It also makes it so duplicate
monitors cannot be added for a given transport.
ASTERISK-28213
Change-Id: I94b06f9026ed177d6adfd538317c784a42c1b17a
This module allows presence subscriptions to voicemail boxes. This
allows common BLF keys to act as voicemail waiting indicators.
ASTERISK-28301
Change-Id: I62a246c24f3d7d432e33e22d7a4a57c15c292fdd
Delivery timeval in the smoother object will fall behind while a DTMF is
being generated. This can eventually lead to invalid rtp timestamps.
To prevent this from happening the smoother needs to be reset after every
DTMF to keep the timing up to date.
ASTERISK-28303 #close
Change-Id: Iaba3f7b428ebd72a4caa90e13b829ab4f088310f
When listing the applications the apps lock was incorrectly
locked twice instead of being locked and then unlocked.
ASTERISK-28302
Change-Id: If7d064592a9e88c0f1049214c50e02be6dabf79e
When processing SSRC attributes we were iterating through
all of them, even though we only need to know the remote
SSRC once. This was problematic because some browsers group
SSRCs together on a stream, and due to our negotiation only
end up using the first one. Since we set the second one as
the remote SSRC we would drop the received media from them
instead of allowing it through.
In the future this may be extended to allow SSRC groups
and to use information from the attributes.
Change-Id: I4dc87087dbe56a83aa65f0f897bbd4ca75ec1270
To prevent one subsystem's taskprocessors from causing others
to stall, new capabilities have been added to taskprocessors.
* Any taskprocessor name that has a '/' will have the part
before the '/' saved as its "subsystem".
Examples:
"sorcery/acl-0000006a" and "sorcery/aor-00000019"
will be grouped to subsystem "sorcery".
"pjsip/distributor-00000025" and "pjsip/distributor-00000026"
will bn grouped to subsystem "pjsip".
Taskprocessors with no '/' have an empty subsystem.
* When a taskprocessor enters high-water alert status and it
has a non-empty subsystem, the subsystem alert count will
be incremented.
* When a taskprocessor leaves high-water alert status and it
has a non-empty subsystem, the subsystem alert count will be
decremented.
* A new api ast_taskprocessor_get_subsystem_alert() has been
added that returns the number of taskprocessors in alert for
the subsystem.
* A new CLI command "core show taskprocessor alerted subsystems"
has been added.
* A new unit test was addded.
REMINDER: The taskprocessor code itself doesn't take any action
based on high-water alerts or overloading. It's up to taskprocessor
users to check and take action themselves. Currently only the pjsip
distributor does this.
* A new pjsip/global option "taskprocessor_overload_trigger"
has been added that allows the user to select the trigger
mechanism the distributor uses to pause accepting new requests.
"none": Don't pause on any overload condition.
"global": Pause on ANY taskprocessor overload (the default and
current behavior)
"pjsip_only": Pause only on pjsip taskprocessor overloads.
* The core pjsip pool was renamed from "SIP" to "pjsip" so it can
be properly grouped into the "pjsip" subsystem.
* stasis taskprocessor names were changed to "stasis" as the
subsystem.
* Sorcery core taskprocessor names were changed to "sorcery" to
match the object taskprocessors.
Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56
Event type filtering is now enabled, and configurable per application. An app is
now able to specify which events are sent to the application by configuring an
allowed and/or disallowed list(s). This can be done by issuing the following:
PUT /applications/{applicationName}/eventFilter
And then enumerating the allowed/disallowed event types as a body parameter.
ASTERISK-28106
Change-Id: I9671ba1fcdb3b6c830b553d4c5365aed5d588d5b
p2p_write updates txformat but doesn't require a smoother. If a smoother
was created by another bridge type the smoother could fall out of date causing
one way audio issues. To prevent this the smoother is now destroyed on the
start of native bridge.
ASTERISK-28284 #close
Change-Id: I84e67f144963787fff9b4d79ac500514fb40cdc6
Currently, the Asterisk's pjsip_session module does not keeping the
rtcp's stats info after it was removed. But by adding the results
vector and keeping it until session is destroying, it can give more
useful information for other modules.
ASTERISK-28253
Change-Id: Ib25c2d3fc4da084aecfde2a82c1b1d733bd64fa5
