REMB's exponent is 6-bits (0..63) and has a mantissa of 18-bits. We were using
an unsigned integer to represent the bitrate. However, that type is not large
enough to hold all potential bitrate values. If the bitrate is large enough
bits were being shifted off the "front" of the mantissa, which caused the
wrong value to be sent to the browser.
This patch makes it so it now uses a float type to hold the bitrate. Using a
float allows for all bitrate values to be correctly represented.
ASTERISK-28255
Change-Id: Ice00fdd16693b16b41230664be5d9f0e465b239e
It looks like we're not properly calculating jitter values on received
video streams. This patch enables the code that does jitter calculations
for those streams.
Change-Id: Iaac985808829c8f034db8c57318789c4c8c11392
It was difficult to check the channel's current application and
parameters using ARI for current channels. Added app_name, app_data
items to show the current application information.
ASTERISK-28343
Change-Id: Ia48972b3850e5099deab0faeaaf51223a1f2f38c
If Realtime @ variable value is NULL or empty or contains only whitespaces
then when we try to retrieve it using PJSIP_ENDPOINT we get WARNING
pjsip_endpoint_function_read: Unknown property @my_var for PJSIP endpoint.
And the variable is missing in the result of CLI pjsip show endpoint.
This patch keeps empty sorcery extended field.
ASTERISK-28341 #close
Change-Id: I221fccc04cbfa2be17ce971f64ae0e74e465eea0
Because StasisEnd's timestamp created it's own timestamp, it makes
wrong timestamp, compare to other channel event(ChannelDestroyed).
Fixed to getting a timestamp from the Channel's timestamp.
ASTERISK-28333
Change-Id: I5eb8380fc472f1100535a6bc4983c64767026116
As part of an earlier voicemail refactor, ast_delete_mwi_state_full
was modified to remove the pool topic for a mailbox when the state
was deleted. This was an attempt to prevent stale topics from
accumulating when app_voicemail was reloaded and a mailbox went
away. Unfortunately because of the fact that when app_voicemail
reloads, ALL mailboxes are deleted then only current ones recreated,
topics were being removed from the pool that still had subscribers
on them, then recreated as new topics of the same name. So now
modules like res_pjsip_mwi are listening on a topic that will
never receive any messages because app_voicemail is publishing on
a different topic that happens to have the same name. The solutiuon
to this is not easy and given that accumulating topics for
deleted mailboxes is less evil that not sending NOTIFYs...
* Removed the call to stasis_topic_pool_delete_topic in
ast_delete_mwi_state_full.
Also:
* Fixed a topic reference leak in res_pjsip_mwi
mwi_stasis_subscription_alloc.
* Added some debugging to mwi_stasis_subscription_alloc,
stasis_topic_create, and topic_dtor.
* Fixed a topic reference leak in an error path in
internal_stasis_subscribe.
ASTERISK-28306
Reported-by: Jared Hull
Change-Id: Id7da0990b3ac4be4b58491536b35f41291247b27
Added ARI resource for channel statistics.
GET /ari/channels/{channelId}/rtp_statistics : It returns given
channel's rtp statistics detail.
ASTERISK-28320
Change-Id: I4343eec070438cec13f2a4f22e7fd9e574381376
Changed to requirement to having timestamp for all of ARI events.
The below ARI events were changed to having timestamp.
PlaybackStarted, PlaybackContinuing, PlaybackFinished,
RecordingStarted, RecordingFinished, RecordingFailed,
ApplicationReplaced, ApplicationMoveFailed
ASTERISK-28326
Change-Id: I382c2fef58f5fe107e1074869a6d05310accb41f
Topic names now follow: <subsystem>:<functionality>[/<object>]
This ensures that they are all unique, and also provides better
insight in to what each topic is for.
Subscriber ids now also use the main topic name they are
subscribed to and an incrementing integer as their identifier to
make it easier to understand what the subscription is primarily
responsible for.
Both the CLI commands for listing topic and subscription statistics
now sort to make it a bit easier to see what is going on.
Subscriptions will now show all topics that they are receiving messages
from, not just the main topic they were subscribed to.
ASTERISK-28335
Change-Id: I484e971a38c3640f2bd156282e532eed84bf220d
Currently, when the Asterisk calculates rtp statistics, it uses
sample_count as a unsigned integer parameter. This would be fine
for most of cases, but in case of large enough number of sample_count,
this might be causing the divide by zero error.
ASTERISK-28321
Change-Id: If7e0629abaceddd2166eb012456c53033ea26249
chan_sip will always ignore 183 responses that do not contain SDP
however, chan_pjsip will currently always translate it into a
183 with SDP. This new flag allows chan_pjsip to have the same
behavior as chan_sip.
ASTERISK-28322 #close
Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a
strtok() uses a static buffer, making it not thread safe.
Also add a #define to cause a compile failure if strtok is used.
Change-Id: Icce265153e1e65adafa8849334438ab6d190e541
Added the ability to move between Stasis applications within Stasis.
This can be done by calling 'move' in an application, providing (at
minimum) the channel's id and the application to switch to. If the
application is not registered or active, nothing will happen and the
channel will remain in the current application, and an event will be
triggered to let the application know that the move failed. The event
name is "ApplicationMoveFailed", and provides the "destination" that the
channel was attempting to move to, as well as the usual channel
information. Optionally, a list of arguments can be passed to the
function call for the receiving application. A full example of a 'move'
call would look like this:
client.channels.move(channelId, app, appArgs)
The control object used to control the channel in Stasis can now switch
which application it belongs to, rather than belonging to one Stasis
application for its lifetime. This allows us to use the same control
object instead of having to tear down the current one and create
another.
ASTERISK-28267 #close
Change-Id: I43d12b10045a98a8d42541889b85695be26f288a
This small feature will help to checking the bridge's status to
figure out which bridge is in old/zombie or not. Also added
detail items for the 'bridge show *' cli to provide more detail
info. And added creation item to the ARI as well.
ASTERISK-28279
Change-Id: I460238c488eca4d216b9176576211cb03286e040
PJSIP assumes that these header names are not allocated, and does not
clone the name strings when reusing headers.
Block unload of res_pjsip_diversion until shutdown to ensure static
memory stays valid.
ASTERISK-28312 #close
Change-Id: Ibd6ea55ec4a604bbd43ac07f8d0b54da2c39b8b9
Rather than calling ast_odbc_find_table() in the prepare callback, call
it beforehand and pass it in to the callback to avoid the need for a
second connection.
ASTERISK-28166 #close
Change-Id: I6f8a0b9990d636fd6bc1a92ed70f7050d2436202
apply_negotiated_sdp_stream was returning a "1" when no joint
capabilities were found on an outgoing call instead of a "-1".
This indicated to res_pjsip_session that the handler DID handle
the sdp when in fact it didn't. Without the appropriate setup,
a subsequent media frame coming in would have an invalid stream_num
and cause a seg fault when the stream was attempted to be retrieved.
apply_negotiated_sdp_stream now returns the correct "-1" and any
media is now discarded before it reaches the core stream processing.
ASTERISK-28260
Reported by: Sotiris Ganouris
Change-Id: Ia095cb16b4862f2f6ad6d2d2a77453fa2542371f
This reverts commit d524ad523d.
Reason for revert: This causes Contact and Via headers to have the wrong
transport address.
ASTERISK-28309 #close
Change-Id: Ibba4d6176f68e39279fcd9a545f81d56e747bed8
If both send_registrations and send_auth are both set to yes,
outbound_auth/username must be set or we crash.
ASTERISK-27992 #close
Change-Id: I6418d56de1ae53f80393b314c2584048fbf7f11d
When a contact was removed by the registrar it did not always check to see if
the circumstances involved a monitored reliable transport. For instance, if the
'remove_existing' option was set to 'true' then when existing contacts were
removed due to 'max_contacts' being reached, those existing contacts being
removed did not unregister the transport monitor.
Also, it was possible to add more than one monitor on a reliable transport for
a given aor and contact.
This patch makes it so all contact removals done by the registrar also remove
any associated transport monitors if necessary. It also makes it so duplicate
monitors cannot be added for a given transport.
ASTERISK-28213
Change-Id: I94b06f9026ed177d6adfd538317c784a42c1b17a
This module allows presence subscriptions to voicemail boxes. This
allows common BLF keys to act as voicemail waiting indicators.
ASTERISK-28301
Change-Id: I62a246c24f3d7d432e33e22d7a4a57c15c292fdd
Delivery timeval in the smoother object will fall behind while a DTMF is
being generated. This can eventually lead to invalid rtp timestamps.
To prevent this from happening the smoother needs to be reset after every
DTMF to keep the timing up to date.
ASTERISK-28303 #close
Change-Id: Iaba3f7b428ebd72a4caa90e13b829ab4f088310f
When listing the applications the apps lock was incorrectly
locked twice instead of being locked and then unlocked.
ASTERISK-28302
Change-Id: If7d064592a9e88c0f1049214c50e02be6dabf79e
When processing SSRC attributes we were iterating through
all of them, even though we only need to know the remote
SSRC once. This was problematic because some browsers group
SSRCs together on a stream, and due to our negotiation only
end up using the first one. Since we set the second one as
the remote SSRC we would drop the received media from them
instead of allowing it through.
In the future this may be extended to allow SSRC groups
and to use information from the attributes.
Change-Id: I4dc87087dbe56a83aa65f0f897bbd4ca75ec1270
To prevent one subsystem's taskprocessors from causing others
to stall, new capabilities have been added to taskprocessors.
* Any taskprocessor name that has a '/' will have the part
before the '/' saved as its "subsystem".
Examples:
"sorcery/acl-0000006a" and "sorcery/aor-00000019"
will be grouped to subsystem "sorcery".
"pjsip/distributor-00000025" and "pjsip/distributor-00000026"
will bn grouped to subsystem "pjsip".
Taskprocessors with no '/' have an empty subsystem.
* When a taskprocessor enters high-water alert status and it
has a non-empty subsystem, the subsystem alert count will
be incremented.
* When a taskprocessor leaves high-water alert status and it
has a non-empty subsystem, the subsystem alert count will be
decremented.
* A new api ast_taskprocessor_get_subsystem_alert() has been
added that returns the number of taskprocessors in alert for
the subsystem.
* A new CLI command "core show taskprocessor alerted subsystems"
has been added.
* A new unit test was addded.
REMINDER: The taskprocessor code itself doesn't take any action
based on high-water alerts or overloading. It's up to taskprocessor
users to check and take action themselves. Currently only the pjsip
distributor does this.
* A new pjsip/global option "taskprocessor_overload_trigger"
has been added that allows the user to select the trigger
mechanism the distributor uses to pause accepting new requests.
"none": Don't pause on any overload condition.
"global": Pause on ANY taskprocessor overload (the default and
current behavior)
"pjsip_only": Pause only on pjsip taskprocessor overloads.
* The core pjsip pool was renamed from "SIP" to "pjsip" so it can
be properly grouped into the "pjsip" subsystem.
* stasis taskprocessor names were changed to "stasis" as the
subsystem.
* Sorcery core taskprocessor names were changed to "sorcery" to
match the object taskprocessors.
Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56
Event type filtering is now enabled, and configurable per application. An app is
now able to specify which events are sent to the application by configuring an
allowed and/or disallowed list(s). This can be done by issuing the following:
PUT /applications/{applicationName}/eventFilter
And then enumerating the allowed/disallowed event types as a body parameter.
ASTERISK-28106
Change-Id: I9671ba1fcdb3b6c830b553d4c5365aed5d588d5b
p2p_write updates txformat but doesn't require a smoother. If a smoother
was created by another bridge type the smoother could fall out of date causing
one way audio issues. To prevent this the smoother is now destroyed on the
start of native bridge.
ASTERISK-28284 #close
Change-Id: I84e67f144963787fff9b4d79ac500514fb40cdc6
Currently, the Asterisk's pjsip_session module does not keeping the
rtcp's stats info after it was removed. But by adding the results
vector and keeping it until session is destroying, it can give more
useful information for other modules.
ASTERISK-28253
Change-Id: Ib25c2d3fc4da084aecfde2a82c1b1d733bd64fa5
A previous patch attempt to mitigate blocked threads on transport shutdown for
a given contact. It was thought that a second lock could be avoided by checking
the 'removing' flag on the transport monitor twice (once before and once after
the normal named aor locking). However as with usual threading issues if the
timing was right the original problem still occured.
This patch adds locking around the first 'removing' flag check and set, thus
nullifying the secondary check, so it was removed.
ASTERISK-28213
Change-Id: Iaa8e36e5311789549b76d8de42dfcea96013b2ed
When Asterisk is connected and used with a database the response
time of the database can cause problems in Asterisk if it is long.
Normally the only way to see this problem would be to retrieve a
backtrace from Asterisk and examine where things are blocked, or
examine the database to see if there is any indication of a
problem.
This change adds some basic query logging to make it easier to
investigate such a problem. When logging is enabled res_odbc will
now keep track of the number of queries executed, as well as the
query that has taken the longest time to execute. There is also
an option which will cause a WARNING message to be output if a
query takes longer than a configurable amount of time to execute.
This makes it easier and clearer for users that their database may
be experiencing a problem that could impact Asterisk.
ASTERISK-28277
Change-Id: I173cf4928b10754478a6a8c27dfa96ede0f058a6
At AstriCon, there was a strong desire for the ability to completely
bypass dialplan when using ARI. This is possible through the automatic
creation of a context and a couple of extensions whenever an application
is started.
For example, if you have an application named 'ari-example', a context
named 'stasis-ari-example' will be automatically created whenever this
application is started as long as one does not already exist. Two
extensions (a match-all extension for Stasis and a 'h' extension) are
created within this context. Any endpoint that registers to Asterisk
within this context will send all calls to the corresponding Stasis
application. When the application is destroyed, the context is removed.
ASTERISK-28104 #close
Change-Id: Ie35bd93075e05b05e3ae129a83c9426931b7ebac
Added ARI resource.
GET /ari/asterisk/ping : It returns "pong" message with timestamp
and asterisk id. It would be useful for simple heath check.
Change-Id: I8d24e1dcc96f60f73437c68d9463ed746f688b29
The context specified by 'regcontext' was not being created, so when Asterisk
attempted to later dynamically add an extension it would fail. This patch now
creates the context if a 'regcontext' is specified.
ASTERISK-28238
Change-Id: I0f36cf4ab0a93ff4b1cc5548d617ecfd45e09265
Testing revealed that the cache added no benefit but that it could
consume excessive memory.
Two new index related functions were created:
ast_sounds_get_index_for_file() and ast_media_index_update_for_file()
which restrict index updating to specific sound files.
The original ast_sounds_get_index() and ast_media_index_update()
calls are still available but since they no longer cache the results
internally, developers should re-use an index they may already have
instead of calling ast_sounds_get_index() repeatedly. If information
for only a single file is needed, ast_sounds_get_index_for_file()
should be called instead of ast_sounds_get_index().
The media_index directory scan code was elimininated in favor of
using the existing ast_file_read_dirs() function.
Since there's no more cache, ast_sounds_index_init now only
registers the sounds cli commands instead of generating the
initial index and subscribing to stasis format register/unregister
messages.
"sounds" is no longer a valid target for the "module reload"
command.
Both the sounds cli commands and the sounds ari resources were
refactored to only call ast_sounds_get_index() once per invocation
and to use ast_sounds_get_index_for_file() when a specific sound
file is requested.
Change-Id: I1cef327ba1b0648d85d218b70ce469ad07f4aa8d
Control frames (PING / PONG / CLOSE) can be received in the middle of a
fragmented message. In order to ensure they do not interfere with the
reassembly buffer, we exit early and do not return the payload to the
caller.
ASTERISK-28257 #close
Change-Id: Ia5367144fe08ac6141bba3309517a48ec7f013bc
When a reliable transport is shutdown it's possible for the pjsip registrar
resource shutdown handler to get called multiple times. If this happens and one
of the threads is taking "too long" (slow database call for instance) then the
others get blocked waiting to delete.
Since it only takes one to delete the contact then the other threads should be
able to continue on if one of the threads is currently "deleting". This patch
makes it so now when a thread enters the shutdown handler it checks to see if a
thread is currently already "deleting". If so, then the thread does not attempt
to get the lock, and instead continues on thus avoiding the blockage.
ASTERISK-28213 #close
Change-Id: I7563ca596312b1dff4f3ab41483e89fe2862328a
To avoid the stream name collide if there're more than one video track
in one client. If client has multi video tracks, the name of ast_stream
which represents each video track may be the same. Use the MSID:LABEL
here because it's identifiable.
ASTERISK-28196 #close
Reported-by: xiemchen
Change-Id: Ib62b2886e8d3a30e481d94616b0ceaeab68a870b
This ensures that Asterisk responds properly to frames received from a
client with opcode 8 (CLOSE) by echoing back the status code in its own
CLOSE frame.
Handling of the CLOSE opcode is moved up with the rest of the opcodes so
that unmasking gets applied. The payload is no longer returned to the
caller, but neither ARI nor the chan_sip nor pjsip made use of the
payload, which is a good thing since it was masked.
ASTERISK-28231 #close
Change-Id: Icb1b60205fc77ee970ddc91d1f545671781344cf
The transport management code that checks for idle connections keeps a
reference to PJSIP's transport for IDLE_TIMEOUT milliseconds (32000 by
default). Because of this, if the transport is closed before this
timeout, the idle checking code will keep the transport from actually
being shutdown until the timeout expires.
Rather than passing the AO2 object to the scheduler task, we just pass
its key and look it up when it is time to potentially close the idle
connection. The other transport management code handles cleaning up
everything else for us.
Additionally, because we use the address of the transport when
generating its name, we concatenate an incrementing ID to the end of the
name to guarantee uniqueness.
Related to ASTERISK~28231
Change-Id: I02ee9f4073b6abca9169d30c47aa69b5e8ae9afb
Previously both AMI and ARI used a default route on
their stasis message router to handle some of the
messages for publishing out their respective
connection. This caused messages to be given to
their subscription that could not be formatted
into AMI or JSON.
This change adds an API call to the stasis message
router which allows a default route to be set as well
as formatters that the default route is expecting.
This allows both AMI and ARI to specify that their
default route only wants messages of their given
formatter. By doing so stasis can more intelligently
filter at publishing time so that they do not receive
messages which will not be turned into AMI or JSON.
ASTERISK-28244
Change-Id: I65272819a53ce99f869181d1d370da559a7d1703
When --enable-dev-mode is used, pjsip_tpmgr_receive_packet() will assert
if passed a payload length of 0, so treat empty frames as if we didn't
receive them.
Change-Id: I9c5fdccd89cc8d2f3ed7e3ee405ef0fc78178f48
The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out
the ContactStatus AMI event when a contact is updated.
Thist change broke things which rely on old behavior.
This patch adds a new PJSIP global configuration option
'send_contact_status_on_update_registration' to be able to preserve old
ContactStatus behavior.
By default new behavior, i.e. the ContactStatus event will not be sent when a
device refreshes its registration.
Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46
For video streams it was possible for the abs-send-time information
to be placed into RTP streams even if not negotiated. Depending on
the endpoint in use this could cause video to not flow.
We now only enable abs-send-time for negotiation if WebRTC is enabled.
ASTERISK-28230
Change-Id: I0eb682302f8da3a4ea3c42e839208d55f825ed0c
The remote side may start a new stream when renegotiating RTP.
Need to reset the DTMF last sequence number and the timestamp
of the last END packet on RTP renegotiation.
If the new time stamp is lower then the timestamp of the last DTMF END packet
the asterisk drops all DTMF frames as out of order.
This bug was caught using Cisco ip-phone SPA5XX and codec g722.
On SIP session update the SPA50X resets stream and a new timestamp is twice
smaller then the previous.
ASTERISK-28162 #close
Change-Id: Ic72b4497e74d801b27a635559c1cf29c16c95254
All of the fields that were removed were no longer referenced except for
'lastrxts' and 'rxseqno' which were only ever written to.
Change-Id: I5a5d31eb33e97663843698f58d0d97f22a76627c
The profile-iop octet (the 2nd) of profile-level-id can be zero
according to RFC 6184 Section 8.1. So we ignore its value when deciding
to include profile-level-id in the outgoing SDP.
ASTERISK-27959 #close
Reported by: David Kuehling
Change-Id: Id28cd916a3d7748058fe9609b585d07d9e243f73
The ARI DELETE /channels command takes a "reason" parameter
Previously, there were only five reasons implemented
This patch adds more reasons to choose from for more
complex setups
ASTERISK-28198 #close
Change-Id: I85996f1076c9946d65c778413f040a845a90fecc
* The bridging core no longer uses the stasis cache for bridge
snapshots. The latest bridge snapshot is now stored on the
ast_bridge structure itself.
* The following APIs are no longer available since the stasis cache
is no longer used:
ast_bridge_topic_cached()
ast_bridge_topic_all_cached()
* A topic pool is now used for individual bridge topics.
* The ast_bridge_cache() function was removed since there's no
longer a separate container of snapshots.
* A new function "ast_bridges()" was created to retrieve the
container of all bridges. Users formerly calling
ast_bridge_cache() can use the new function to iterate over
bridges and retrieve the latest snapshot directly from the
bridge.
* The ast_bridge_snapshot_get_latest() function was renamed to
ast_bridge_get_snapshot_by_uniqueid().
* A new function "ast_bridge_get_snapshot()" was created to retrieve
the bridge snapshot directly from the bridge structure.
* The ast_bridge_topic_all() function now returns a normal topic
not a cached one so you can't use stasis cache functions on it
either.
* The ast_bridge_snapshot_type() stasis message now has the
ast_bridge_snapshot_update structure as it's data. It contains
the last snapshot and the new one.
* cdr, cel, manager and ari have been updated to use the new
arrangement.
Change-Id: I7049b80efa88676ce5c4666f818fa18ad1985369
When a channel snapshot was created it used to be done
from scratch, copying all data (many strings). This incurs
a cost when doing so.
This change segments the channel snapshot into different
components which can be reused if unchanged from the
previous snapshot creation, reducing the cost. In normal
cases this results in some pointers being copied with
reference count being bumped, some integers being set,
and a string or two copied. The other benefit is that it
is now possible to determine if a channel snapshot update
is redundant and thus stop it before a message is published
to stasis.
The specific segments in the channel snapshot were split up
based on whether they are changed together, how often they
are changed, and their general grouping. In practice only
1 (or 0) of the segments actually get changed in normal
operation.
Invalidation is done by setting a flag on the channel when
the segment source is changed, forcing creation of a new
segment when the channel snapshot is created.
ASTERISK-28119
Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423
Channels no longer use the Stasis cache for channel snapshots. Instead
they are stored in a hash table in stasis_channels which reduces the
number of Stasis messages created and allows better storage.
As a result the following APIs are no longer available since the stasis
cache is no longer used:
ast_channel_topic_cached()
ast_channel_topic_all_cached()
The ast_channel_cache_all() and ast_channel_cache_by_name() functions
now return an ao2_container of ast_channel_snapshots rather than
a container of stasis_messages therefore you can't (and don't need
to) call stasis_cache functions on it.
The ast_channel_topic_all() function now returns a normal topic not
a cached one so you can't use stasis cache functions on it either.
The ast_channel_snapshot_type() stasis message now has the
ast_channel_snapshot_update structure as it's data. It contains the
last snapshot and the new one.
ast_channel_snapshot_get_latest() still returns the latest snapshot.
The latest snapshot is now stored on the channel itself to eliminate
cache hits when Stasis messages that have the snapshot as a payload
are created.
ASTERISK-28102
Change-Id: I9334febff60a82d7c39703e49059fa3a68825786
The marker bit set on the voice packet indicates the start
of a new stream and a new time stamp.
Need to reset the DTMF last sequence number and the timestamp
of the last END packet.
If the new time stamp is lower then the timestamp of the last DTMF END packet
the asterisk drops all DTMF frames as out of order.
This bug was caught using Cisco ip-phone SPA50X and codec g722.
On SIP session update the SPA50X resets stream indicating it with market bit
and a new timestamp is twice smaller then the previous.
ASTERISK-28162 #close
Change-Id: If9c5742158fa836ad549713a9814d46a5d2b1620
Replace usage of ao2_container_alloc with ao2_container_alloc_hash or
ao2_container_alloc_list. Remove ao2_container_alloc macro.
Change-Id: I0907d78bc66efc775672df37c8faad00f2f6c088
This change adds the ability for subscriptions to indicate
which message types they are interested in accepting. By
doing so the filtering is done before being dispatched
to the subscriber, reducing the amount of work that has
to be done.
This is optional and if a subscriber does not add
message types they wish to accept and set the subscription
to selective filtering the previous behavior is preserved
and they receive all messages.
There is also the ability to explicitly force the reception
of all messages for cases such as AMI or ARI where a large
number of messages are expected that are then generically
converted into a different format.
ASTERISK-28103
Change-Id: I99bee23895baa0a117985d51683f7963b77aa190
The res_ari(POST /channels/create handler) deos not check the endpoint
parameter length. And it causes core
dump.
Fixed it to check the parameter length. Also fixed memory leak.
ASTERISK-28169
Change-Id: Ibf10a9eb8a2e3a9ee1e13fbe748b2ecf955c3993
PJSIP assumes that these header names are not allocated, does not clone
the name strings when reusing headers.
Block unload of res_pjsip_caller_id until shutdown to ensure static
memory stays valid. It was previously unsafe to unload while any
sessions are active.
Change-Id: I190854dea943d6e441cf03733f8a0da661aea27f
The presence of Record-Route in re-invites is optional, thus it is
important to make sure the dialog doesn't have a routset before
rewriting the contact header.
ASTERISK-28129 #close
Change-Id: Ic8ceb54ccfc93f7e315e476c514a2c777f2da7dc
When Asterisk's taskprocessors get overloaded we need to reduce the work
load. res_pjsip currently ignores new SIP requests and relies on SIP
retransmissions in the hope that the overload condition will clear soon
enough to handle the retransmitted SIP request.
This change adds the following code after ast_taskprocessor_alert_get()
has returned TRUE:
1- identifies transport type. If non-udp then send a 503 response
2- if transport type is udp/udp6 then ignore, as before.
Change-Id: I1c230b40d43a254ea0f226b7acf9ee480a5d3836
The use of a '|' in the "global/debug" synopsis documentation caused the
generated html table on the wiki to add an extra column that included the
text after the pipe.
This patch replaces the pipe with a comma.
ASTERISK-28150
Change-Id: I3d79a6ca6d733d9cb290e779438114884b98a719
The current round-robin method does not take the current taskprocessor
load into consideration when distributing requests. Using the least-size
method the request goes to the taskprocessor that is servicing the least
number of active tasks at the current time.
Longer running tasks with the round-robin method can delay processing
tasks.
* Change the algorithm from round-robin to least-size for picking the
PJSIP taskprocessor from the default serializer pool.
Change-Id: I7b8d8cc2c2490494f579374b6af0a4868e3a37cd
This patch adds new options 'trust_connected_line' and 'send_connected_line'
to the endpoint.
The option 'trust_connected_line' is to control if connected line updates
are accepted from this endpoint.
The option 'send_connected_line' is to control if connected line updates
can be sent to this endpoint.
The default value is 'yes' for both options.
Change-Id: I16af967815efd904597ec2f033337e4333d097cd
The module 'res_pjsip_notify' inefficiently makes a lot of DB requests
on CLI completion on the endpoint.
For example if there are 10k endpoints the module makes 10k requests
of these 10k records.
Even if a part of the endpoint entered
the module makes the same 10k requests and then filtered them by itself.
This patch gathers endpoints container by prefix
and adds all gathered endpoints to completion at once.
ASTERISK-28137 #close
Change-Id: Ic20024912cc77bf4d3e476c4cd853293c52b254b
Add a new global flag to res_pjsip to allow the callerid to be used
as the username in the contact header. This allows chan_pjsip to have
the same behavour as chan_sip
ASTERISK-28087 #close
Change-Id: I9a720e058323f6862a91c62f8a8c1a4b5c087b95
This change implements a few different generic things which were brought
on by Google Voice SIP.
1. The concept of flow transports have been introduced. These are
configurable transports in pjsip.conf which can be used to reference a
flow of signaling to a target. These have runtime configuration that can
be changed by the signaling itself (such as Service-Routes and
P-Preferred-Identity). When used these guarantee an individual connection
(in the case of TCP or TLS) even if multiple flow transports exist to the
same target.
2. Service-Routes (RFC 3608) support has been added to the outbound
registration module which when received will be stored on the flow
transport and used for requests referencing it.
3. P-Associated-URI / P-Preferred-Identity (RFC 3325) support has been
added to the outbound registration module. If a P-Associated-URI header
is received it will be used on requests as the P-Preferred-Identity.
4. Configurable outbound extension support has been added to the outbound
registration module. When set the extension will be placed in the
Supported header.
5. Header parameters can now be configured on an outbound registration
which will be placed in the Contact header.
6. Google specific OAuth / Bearer token authentication
(draft-ietf-sipcore-sip-authn-02) has been added to the outbound
registration module.
All functionality changes are controlled by pjsip.conf configuration
options and do not affect non-configured pjsip endpoints otherwise.
ASTERISK-27971 #close
Change-Id: Id214c2d1c550a41fcf564b7df8f3da7be565bd58
These macros have been documented as legacy for a long time but are
still used in new code because they exist. Remove all references to:
* ao2_container_alloc_options
* ao2_t_container_alloc_options
* ao2_t_container_alloc
These macro's are also removed. Only ao2_container_alloc remains due to
it's use in over 100 places.
Change-Id: I1a26258b5bf3deb081aaeed11a0baa175c933c7a
Most were in comments. A couple were in warning messages.
Pointed out by Jonathan H on the Asterisk users mailing list.
Change-Id: I6286939dff5d0a27a2758140570106f1cb351855
* The dependency ensures that res_pjproject cannot be manually unloaded
before res_rtp_asterisk.
* The dependency allows startup loading errors to report that
res_rtp_asterisk depends upon res_pjproject.
Change-Id: Icf5e7581f4ddd6189929f6174c74dd951f887377
This patch sets the callerid_tag to empty string by default.
If the callerid_tag is set to NULL then the tag does not
become part of a connected line update.
For example:
Alice's tag is "Alice".
Bob's tag is empty.
Charlie's tag is "Charlie".
Alice calls Bob and then does attended transfer to Charlie.
When Alice hangs up the CONNECTEDLINE(tag) is "Alice"
on the interception routine on the Charlie's channel, but should be empty.
Ths patch also fix memory leaks if there are more then one options
"callerid", "callerid_tag", "voicemail_extension" and "contact_user"
in the pjsip.conf endpoint definition.
Change-Id: I86ba455c4677ca8d516d9a04ce7fb4d24dd576e4
The return status when there was no change in statsd.conf was incorrect.
This resulted in the wrong status message on the CLI when reloading the
module.
* Fixed cleanup on initial load if initializing statsd failed.
Change-Id: Id24fae75f1a7ff584a444a5680e867d989792481
I think this module is so screwed up that it doesn't work anymore. Even
with these attempts to fix things it still won't gracefully shut down.
The module refs will not go to zero to allow unloading the module.
* Fix module ref counting dealing with the SMDI interface object. There
were several off-nominal paths that unbalanced the module ref count. Also
the destructor freed the ao2 object itself which is bad. Made the
smdi_read thread not hold its own ref to the SMDI interface object so when
all refs go away the destructor will stop the listener thread.
* Fixed the smdi_load() return code of 1 concerning the number of
listeners. The test was inverted.
Change-Id: Ic288db51b58e395d6a2fc3847f77176c16988784
This module is an optional dependency of a couple of other modules. If it
declines to load, it then forces other modules that can optionally use
this module to also decline.
* Made use the default configuration if the config file does not exist and
simplified some of the logic.
Change-Id: Ib93191f1fe28c0dd9ebe3d84c7762b32f83c4eb9
This module is an optional dependency of many modules. If it declines to
load it then forces other modules that can optionally use this module to
also decline.
* Made use default configuration if there is a config error or the config
file does not exist.
Change-Id: If1068a582ec54ab7fb437265cb5370a97a825737
CLI command 'pjsip show contacts' inefficiently make a lot of DB requests.
For example if there are 10k aors then asterisk requests these 10k records
of aor and then does 10k requests of contact - one request per aor.
Even if use 'like <pattern>' the asterisk requests all aor's and contact's
records and then filters them by itself.
This patch gathers contact's container by
- retrieving all dynamic contacts by regex (filtered by reg_server)
- retrieving all aors with permanent contacts
- finally filters container by regex
ASTERISK-28077 #close
Change-Id: Id0ad65d14952a02fb213273a90f3f680a8149618
Fixed an issue that resulted in "Allocation failed" each time an ARI
request was made to start playing MOH on a bridge.
In bridge_moh_create() we were attaching the after bridge callbacks to
chan which is the ;1 channel of the unreal channel pair. We should have
attached them to the ;2 channel which is pushed into the bridge by
ast_unreal_channel_push_to_bridge(). The callbacks are called when the
specific channel leaves the bridging system. Since the ;1 channel is
never put into a bridge the callbacks never get called. The callbacks
then never remove the moh_wrapper from the app_bridges_moh container. As
a result we cannot find the channel associated with the wrapper to start
MOH because it has hungup. This is the reason causing the reported issue.
* Rather than using after bridge callbacks to cleanup, we now have
moh_channel_thread() doing the cleanup when the channel hangs up.
* Fixed moh_channel_thread() accumulating control frames on the stasis
bridge MOH channel until MOH is stopped. Control frames are no longer
accumulated while MOH is playing.
* Fixed channel ref counting issue. stasis_app_bridge_moh_channel() may
or may not return a channel ref. As a result ast_ari_bridges_start_moh()
wouldn't know it may have a channel ref to release.
stasis_app_bridge_moh_channel() will now return a ref with the channel it
returns.
* Eliminated RAII_VAR in bridge_moh_create().
ASTERISK-26094 #close
Change-Id: Ibff479e167b3320c68aaabfada7e1d0ef7bd548c
When networks experience disruptions, there can be large gaps of time
between receiving packets. When strictrtp is enabled, this created
issues where a flood of packets could come in and be seen as an attack.
Another option - seqno - has been added to the strictrtp option that
ignores the time interval and goes strictly by sequence number for
validity.
Change-Id: I8a42b8d193673899c8fc22fe7f98ea87df89be71
On SQL error there is not diagnostic information about this error.
There is only
WARNING res_odbc.c: SQL Execute error -1!
The function ast_odbc_print_errors calls a SQLGetDiagField to get the number
of available diagnostic records, but the SQLGetDiagField returns 0.
However SQLGetDiagRec could return one diagnostic records in this case.
Looking at many example of getting diagnostics error information
I found out that the best way it's to use only SQLGetDiagRec
while it returns SQL_SUCCESS.
Also this patch adds calls of ast_odbc_print_errors on SQL_ERROR
to res_config_odbc.
ASTERISK-28065 #close
Change-Id: Iba5ae5470ac49ecd911dd084effbe9efac68ccc1
In order to do this and provide good feedback, a new macro was
created (AST_EXT_LIB_EXTRA_CHECK) which does the normal check and
path setups for the library then compiles, links and runs a supplied
code fragment to do the final determination. In this case, the
final code fragment compares UNBOUND_VERSION_MAJOR
and UNBOUND_VERSION_MINOR to determine if they're greater than or
equal to 1.5.
Since we require version 1.5, some code in res_resolver_unbound
was also simplified.
ASTERISK-28045
Reported by: Samuel Galarneau
Change-Id: Iee94ad543cd6f8b118df8c4c7afd9c4e2ca1fa72
This change raises a testsuite event to provide what port
Asterisk has actually allocated for RTP. This ensures that
testsuite tests can remove any assumption of ports and instead
use the actual port in use.
ASTERISK-28070
Change-Id: I91bd45782e84284e01c89acf4b2da352e14ae044
* Use "o*" format specifier for optional fields in ast_json_party_id.
* Stop using ast_json_deep_copy on immutable objects, it is now thread
safe to just use ast_json_ref.
Additional changes to ast_json_pack calls in the vicinity:
* Use "O" when an object needs to be bumped. This was previously
avoided as it was not thread safe.
* Use "o?" and "O?" to replace NULL with ast_json_null(). The
"?" is a new feature of ast_json_pack starting with Asterisk 16.
Change-Id: I8382d28d7d83ee0ce13334e51ae45dbc0bdaef48
ast_rtp_new free'd rtp upon failure, but rtp_engine.c would also call
the destroy callback. Remove call to ast_free from ast_rtp_new, leave
it to rtp_engine.c to initiate the full cleanup. Add error detection
for the ssrc_mapping vector initialization. In rtp_allocate_transport
set rtp->s = -1 in the failure path where we close that FD to ensure we
don't try closing it twice.
ASTERISK-27854 #close
Change-Id: Ie02aecbb46228ca804e24b19cec2bb6f7b94e451
'rtpchecksums' and 'rtcpinterval' are not being reset to their defaults
if they are not present in the updated configuration file.
Change-Id: I1162e40199314d46cf3225d5e1271c4c81176670
The HTTP request processing in res_http_websocket allocates additional
space on the stack for various headers received during an Upgrade request.
An attacker could send a specially crafted request that causes this code
to overflow the stack, resulting in a crash.
* No longer allocate memory from the stack in a loop to parse the header
values. NOTE: There is a slight API change when using the passed in
strings as is. We now require the passed in strings to no longer have
leading or trailing whitespace. This isn't a problem as the only callers
have already done this before passing the strings to the affected
function.
ASTERISK-28013 #close
Change-Id: Ia564825a8a95e085fd17e658cb777fe1afa8091a
This adds a module which registers a CLI command that can set the
REMB bitrate value for REMB as it enters or exits Asterisk. This
allows you to ignore what Asterisk or a client produces and is
useful for demonstrations.
This does not generate REMB frames, however, but just modifies
them as they flow to or from a channel.
Change-Id: Ib089427c46a4a36d645cecfe02406adb38c17bec
This change brings in PJSIP 2.8, removes all the patches
that were merged upstream, and makes a minor change to
support a breaking change that was done.
ASTERISK-28059
Change-Id: I5097772b11b0f95c3c1f52df6400158666f0a189
Given a scenario where a session refresh was done with a removed
stream we would always add a removed stream to the outgoing SDP
even if one did not already exist.
This change makes it so that a removed stream is only placed into
the SDP if one already exists.
ASTERISK-28047
Change-Id: Ibb97d21cdeb87a8acae0c720861b0ff255708442