Even if there are no stations or trunks defined, we need to start the sla
thread to make sure we get the reload event. Also, when doing a reload we need
to remove the existing trunks and stations or they end up hanging around.
(closes issue #16818)
Reported by: mbonin
Patches:
sla_reload.patch uploaded by twilson (license 396)
Tested by: twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272109 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Testing proved that if Asterisk sent a connected line reinvite, and
the endpoint to which the reinvite were being sent sent a reinvite, Asterisk
would not properly respond with a 491 response.
The reason is that on connected line reinvites, we set the dialog's invitestate
to INV_CALLING to prevent Asterisk from sending a rapid flurry of connected line
reinvites. For other reinvites we do not do this. Because of the current invitestate,
when Asterisk received the reinvite, we interpreted this as a spiraled INVITE, and thus
did not behave properly.
The fix for this is to not enter the loop detection or spiral logic in handle_request_invite
if the channel state is currently up. This way, no mid-call reinvites will be misinterpreted,
no matter what the nature of the reinvite may have been.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This small changes prevents destroy_all_channels() from accessing a lock on an
unused dahdi_pri struct, resolving a ton of ERRORs that get spewed out when
shutting Asterisk down gracefully.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 3261 section 9 states that a CANCEL has no effect on a
request to a UAS that has already given a final response. This
patch checks to make sure there is a pending invite before
allowing a CANCEL request to be processed, otherwise it responds
to the CANCEL with a "481 Call/Transaction Does Not Exist".
Review: https://reviewboard.asterisk.org/r/697/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271977 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a ref count leak in event filters and checks for
a filter container allocation failure during session creation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch as documented in the sample config allows one to optionally apply
white, black, or both types of filtering to manager events. The new
'eventfilter' option is set per user.
(closes issue #14861)
Reported by: fnordian
Patches:
eventfilter3.patch uploaded by fnordian (license 110),
modified by me
Review: https://reviewboard.asterisk.org/r/673/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Don't Finalize() if Initialize() did not succeed. This resulted in an error
about trying to Finalize() an invalid handle.
Also trim some trailing whitespace while in the area.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If both the transferer and transferee of a attended transfer hangup before
the new channel picks up, the new channel should be hung up as well as it
has no endpoint to talk to. This mirrors the expected behavior used in 1.4.
(closes issue #17444)
Reported by: corruptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r271689 | mnicholson | 2010-06-22 07:52:27 -0500 (Tue, 22 Jun 2010) | 8 lines
Modify chan_sip's packet generation api to automatically calculate the Content-Length. This is done by storing packet content in a buffer until it is actually time to send the packet, at which time the size of the packet is calculated. This change was made to ensure that the Content-Length is always correct.
(closes issue #17326)
Reported by: kenner
Tested by: mnicholson, kenner
Review: https://reviewboard.asterisk.org/r/693/
........
This change also adds an ast_str_copy_string() function (similar to ast_copy_string), that copies one ast_str into another, properly handling embedded nulls.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271690 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r271399 | jpeeler | 2010-06-18 14:28:24 -0500 (Fri, 18 Jun 2010) | 11 lines
Fix crash when parsing some heavily nested statements in AEL on reload.
Due to the recursion used when compiling AEL in gen_prios, all the stack space
was being consumed when parsing some AEL that contained nesting 13 levels deep.
Changing a few large buffers to be heap allocated fixed the crash, although I
did not test how many more levels can now be safely used.
(closes issue #16053)
Reported by: diLLec
Tested by: jpeeler
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271483 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r271335 | jpeeler | 2010-06-18 13:33:17 -0500 (Fri, 18 Jun 2010) | 13 lines
Eliminate deadlock potential in dahdi_fixup().
(This is a backport of 269307, committed to trunk by rmudgett.)
Calling dahdi_indicate() when the channel private lock is already
held can cause a deadlock if the PRI lock is needed because
dahdi_indicate() will also get the channel private lock. The pri_grab()
function assumes that the channel private lock is held once to avoid
deadlock.
(closes issue #17261)
Reported by: aragon
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271336 65c4cc65-6c06-0410-ace0-fbb531ad65f3
According to RFC 3261 section 17.2.2, which describes non-INVITE server
transaction, when a dialog enters the Completed state it must destroy
the dialog after Timer J (T1*64) fires. For a BYE transaction Asterisk
terminates the dialog immediately during sip_hangup() when it should be
waiting T1*64 ms. This results in some odd behavior. For instance if
Asterisk receives a BYE and transmits a 200ok in response, if the endpoint
never receives the 200ok it will retransmit the BYE to which Asterisk
responds with a "481 Call leg/transaction does not exist" because the
dialog is already gone.
To resolve this I made a function called sip_scheddestroy_final(). This
differs slightly from sip_schedestroy() in that it enables a flag that
will prevent the destruction from ever being rescheduled or canceled
afterwards. It also prevents the pvt's needdestroy flag from being set
which triggers the destruction of the dialog within the do_monitor thread().
By using this function we are guaranteed destruction will not occur
until the scheduled time. This allows Asterisk to respond to any possible
retransmits for a dialog after we process the initial BYE request for T1*64 ms.
Other changes: I removed two instances where sip_cancel_destroy is used
right before calling sip_scheddestroy. sip_scheddestroy always calls
sip_cancel_destroy before scheduling the new destruction so it is completely
unnecessary.
Review: https://reviewboard.asterisk.org/r/694/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r270866 | dvossel | 2010-06-16 12:35:29 -0500 (Wed, 16 Jun 2010) | 22 lines
fixes chan_iax2 race condition
There is code in chan_iax2.c that attempts to guarantee that only a single
active thread will handle a call number at a time. This code works once
the thread is added to an active_list of threads, but we are not currently
guaranteed that a newly activated thread will enter the active_list immediately
because it is left up to the thread to add itself after frames have been
queued to it. This means that if two frames come in for the same call number
at the same time, it is possible for them to grab two separate threads because
the first thread did not add itself to the active_list fast enough. This
causes some pretty complex problems.
This patch resolves this race condition by immediately adding an activated
thread to the active_list within the network thread and only depending on
the thread to remove itself once it is done processing the frames queued to
it. By doing this we are guaranteed that if another frame for the same call
number comes in at the same time, that this thread will immediately be found
in the active_list of threads.
Review: https://reviewboard.asterisk.org/r/720/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Clearing the callwaitcas flag in analog_call was causing the incoming D digit
to be ignored which triggers sending the caller ID.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270836 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If there is a problem with a firmware file, Polycom phones will close the
connection. We were continuing to send the file anyway. There should be no
reason to continue sending a file if there is an error writing it.
(closes issue #16682)
Reported by: lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After the manager http auth changes, we forgot to remove the manual
sending of the file. Also, ast_http_send adds two \r\n to the header that
is passed to it, so a trailing \r\n is removed from the Content-type
header. It might be better to change ast_http_send, but I don't like changing
the behavior of an API function.
(closes issue #17239)
Reported by: cjacobsen
Patches:
patch2.diff uploaded by cjacobsen (license 1029)
Tested by: lathama, cjacobsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_sip's "contactdeny" feature screens the "to be registered contact".
In case of nat=yes it should not use the address information from the
Contact header (which is not used at all for routing), but the source
IP address of the request.
Thus, if nat=yes and a client sends a request from a denied IP address
(e.g. by spoofing the src-IP address) it can bypass the screening.
This commit makes contactdeny apply to the src ip when nat=yes instead.
(closes issue #17276)
Reported by: klaus3000
Patches:
patch-asterisk-trunk-contactdeny.txt uploaded by klaus3000 (license 65)
Tested by: klaus3000
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270658 65c4cc65-6c06-0410-ace0-fbb531ad65f3
