........
r375993 | mmichelson | 2012-11-07 11:01:13 -0600 (Wed, 07 Nov 2012) | 30 lines
Fix misuses of timeouts throughout the code.
Prior to this change, a common method for determining if a timeout
was reached was to call a function such as ast_waitfor_n() and inspect
the out parameter that told how many milliseconds were left, then use
that as the input to ast_waitfor_n() on the next go-around.
The problem with this is that in some cases, submillisecond timeouts
can occur, resulting in the out parameter not decreasing any. When this
happens thousands of times, the result is that the timeout takes much
longer than intended to be reached. As an example, I had a situation where
a 3 second timeout took multiple days to finally end since most wakeups
from ast_waitfor_n() were under a millisecond.
This patch seeks to fix this pattern throughout the code. Now we log the
time when an operation began and find the difference in wall clock time
between now and when the event started. This means that sub-millisecond timeouts
now cannot play havoc when trying to determine if something has timed out.
Part of this fix also includes changing the function ast_waitfor() so that it
is possible for it to return less than zero when a negative timeout is given
to it. This makes it actually possible to detect errors in ast_waitfor() when
there is no timeout.
(closes issue ASTERISK-20414)
reported by David M. Lee
Review: https://reviewboard.asterisk.org/r/2135/
........
r375994 | mmichelson | 2012-11-07 11:08:44 -0600 (Wed, 07 Nov 2012) | 3 lines
Remove some debugging that accidentally made it in the last commit.
........
Merged revisions 375993-375994 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375995 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376014 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376015 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a caller enters a queue and no queue member answers the call, the current
behaviour can be a little odd depending on the paused status of the queue
members. If any queue member is paused, but not all, the CDR disposition
will be BUSY. If all queue members are paused, then the CDR disposition is
based instead on the disposition of the call prior to entering the Queue.
This patch modifies the behaviour in the following ways:
* If no queue members are paused, the CDR disposition is whatever the
disposition was prior to going into Queue. If the call was answered this
will be ANSWERED; otherwise, it is NO ANSWER.
* If some queue members are pused, the CDR result is NO ANSWER. (This is a
change in behaviour, as the result would previously have been BUSY)
* If all queue members are paused, the CDR result is whatever the result was
prior to going into Queue. This is the same as the behaviour prior to this
patch.
* If the caller hangs up, times out, or presses '*' with the 'h' option, the
CDR disposition is again not set and is dependent on whether or not the
caller was Answered prior to entering Queue.
This patch was based on one provided by Thomas Arimont, but has been modified
to accomodate findings by the reviewers.
Review: https://reviewboard.asterisk.org/r/2064/
(closes issue AST-906)
Reported by: Thomas Arimont
(closes issue ASTERISK-17776)
Reported by: Attila Megyeri
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update and extend the configuration_file group and enable linking to the application. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375004 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Party A calls Party B
Party B puts Party A on hold.
Party B calls a queue.
Ringing queue member D sees Party B identification.
Party B transfers Party A to the queue.
Queue member D does not get a connected line update for Party A.
Queue member D answers the call and still sees Party B information.
However, if Party A later transfers the call to Party C then queue member
D gets a connected line update for Party C.
* Made pass connected line updates from the caller to queue members while
the queue members are ringing.
(closes issue AST-1017)
Reported by: Thomas Arimont
(closes issue ABE-2886)
Reported by: Thomas Arimont
Tested by: rmudgett
........
Merged revisions 374801 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 374802 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374803 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374804 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374805 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Greenlight in #asterisk brought up that he was receiving an error message "Could
not create persistent member string, out of space" when running app_queue in
Asterisk 10. dump_queue_members() made an assumption that 8K would be enough to
store the generated string, but with queues that have large member lists this is
not always the case. This patch removes the limitation and uses ast_str instead
of a fixed sized buffer.
The complicating factor comes from the fact that ast_db_get requires a buffer
and buffer size argument, which doesn't let us pull back more than what we pass
in, so I introduced a new ast_db_get_allocated() which returns an ast_strdup()'d
copy of the value from astdb.
As an aside, I did some testing on the maximum size of data that we can store in
the BDB library we distribute and was able to store a 10MB string and retrieve
it with no problems, so I feel this is a safe patch.
Review: https://reviewboard.asterisk.org/r/2136/
........
Merged revisions 374108 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374135 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374150 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374151 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix previously untested senarios;
1). On queue initialisation set queue_avail devstate to INUSE.
Previously was unavailable, which indicated an agent was available.
2). When removing members, if there are no other members available, set queue_avail to INUSE.
Previously, if a member interface had become 'unavailable', they were never going to be removed, particularly when persistant queues is enabled.
3). When adding a member, check that they are available, if they are set queue_avail to NOT_INUSE.
Previously on reloaded, members may have been 'unavailable'.
4). When pausing or unpausing a member, set appropriate queue availability.
alecdavis (license 585)
Reported by: Alec Davis
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/2129/
........
Merged revisions 373804 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373805 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Whitespace, doc-blocks, spelling, case, missing and incorrect tags.
* Add cleanup to Makefile for the Doxygen configuration update
* Start updating Doxygen configuration for cleaner output
* Enable inclusion of configuration files into documentation
* remove mantisworkflow...
* update documentation README
* Add markup to Tilghman's email and talk with him about updating his email, he knows...
* no code changes on this commit other than the mentioned Makefile change
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Alec's patch in r373188 added the ability to subscribe to a hint for when
Queue members are available. This patch modifies the check that determines
when a Queue member is available by refactoring the availability checks in
num_available_members into a shared function is_member_available. This
should now handle the ringinuse option, as well as device state values
other than AST_DEVICE_NOT_INUSE.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sets INUSE when no free agents, NOT_INUSE when an agent is free.
modifes handle_statechange() scan members loop to scan for a free agent
and updates the Queue:queuename_avial devstate.
Previously exited early if the member was found in the queue.
Now Exits later when both a member was found, and a free agent was found.
alecdavis (license 585)
Reported by: Alec Davis
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/2121/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373188 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Status: header in a QueueMemberStatus event (and other QueueMember* events)
is the numeric value of the device state corresponding to that Queue Member.
As those values are not exactly obvious, listing them in the documentation is
useful.
Matt Riddell reported this indirectly through the wiki page.
(closes issue ASTERISK-20243)
Reported by: Matt Riddell
........
Merged revisions 372531 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, if pause or unpause was issued on an interface
without specifying a specific queue, a PAUSEALL or UNPAUSEALL event
would be logged in the queue log even if that interface wasn't a
member of any queues. This patch changes it so that these events are
only logged when at least one member of any queue exists for that
interface.
(closes issue AST-946)
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/2079/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372148 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When app_queue is unloaded, the queues container has its refcount
decremented, potentially to 0. Then the taskprocessor responsible
for handling device state changes is unreferenced. If the
taskprocessor happens to be just about to run its task, then it
will create and destroy an iterator on the queues container.
This can cause the refcount on the queues container to increase to
1 and then back to 0. Going back to 0 a second time results in
double frees.
This failure was seen periodically in the testsuite when Asterisk
would shut down.
........
Merged revisions 372089 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372090 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372091 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Queue member status would not always get updated properly when the member
was called, thus resulting in the member getting multiple calls. With this
change, we update the member's status at the time of calling, and we also
check to make sure the member is still available to take the call before
placing an outbound call.
(closes issue ASTERISK-16115)
reported by nik600
Patches:
app_queue.c-svn-r370418.patch uploaded by Italo Rossi (license #6409)
........
Merged revisions 372048 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372049 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372050 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372051 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a static queue had realtime members, then there could be a potential
for those realtime members not to be properly deleted from memory.
If the queue's members were loaded from realtime and then all the
members were deleted from the backend, then the queue would still
think these members existed. The reason was that there was a short-
circuit in code such that if there were no members found in the
backend, then the queue would not be updated to reflect this.
Note that this only affected static queues with realtime members.
Realtime queues with realtime members were unaffected by this issue.
(closes issue ASTERISK-19793)
reported by Marcus Haas
........
Merged revisions 371306 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 371313 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 371324 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371325 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Hangup handlers are an alternative to the h extension. They can be used
in addition to the h extension. The idea is to attach a Gosub routine to
a channel that will execute when the call hangs up. Whereas which h
extension gets executed depends on the location of dialplan execution when
the call hangs up, hangup handlers are attached to the call channel. You
can attach multiple handlers that will execute in the order of most
recently added first.
(closes issue ASTERISK-19549)
Reported by: Mark Murawski
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2002/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the core changes necessary to support AMI event documentation
in the source files of Asterisk, and adds documentation to those AMI events
defined in the core application modules. Event documentation is built from
the source by two new python scripts, located in build_tools:
get_documentation.py and post_process_documentation.py.
The get_documentation.py script mirrors the actions of the existing AWK
get_documentation scripts, except that it will scan the entirety of a source
file for Asterisk documentation. Upon encountering it, if the documentation
happens to be an AMI event, it will attempt to extract information about the
event directly from the manager event macro calls that raise the event. The
post_process_documentation.py script combines manager event instances that
are the same event but documented in multiple source files. It generates
the final core-[lang].xml file.
As this process can take longer to complete than a typical 'make all', it
is only performed if a new make target, 'full', is chosen.
Review: https://reviewboard.asterisk.org/r/1967/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make non-normal dialplan execution routines be able to run on a hung up
channel. This is preparation work for hangup handler routines.
* Fixed ability to support relative non-normal dialplan execution
routines. (i.e., The context and exten are optional for the specified
dialplan location.) Predial routines are the only non-normal routines that
it makes sense to optionally omit the context and exten. Setting a hangup
handler also needs this ability.
* Fix Return application being able to restore a dialplan location
exactly. Channels without a PBX may not have context or exten set.
* Fixes non-normal execution routines like connected line interception and
predial leaving the dialplan execution stack unbalanced. Errors like
missing Return statements, popping too many stack frames using StackPop,
or an application returning non-zero could leave the dialplan stack
unbalanced.
* Fixed the AGI gosub application so it cleans up the dialplan execution
stack and handles the autoloop priority increments correctly.
* Eliminated the need for the gosub_virtual_context return location.
Review: https://reviewboard.asterisk.org/r/1984/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was essentially duplicated functionality where normal channels used
AST_CAUSE_ANSWERED_ELSEWHERE while local channels and queues used
AST_FLAG_ANSWERED_ELSEWHERE. This removes the flag and converts that usage
into AST_CAUSE_ANSWERED_ELSEWHER usage.
Review: https://reviewboard.asterisk.org/r/1944
(closes issue ASTERISK-19865)
Patch-by: Birger Harzenetter
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial and Queue I option is intended to block connected line updates
and redirecting updates. However, it is a feature that when a call is
locally redirected, the I option is disabled if the redirected call runs
as a local channel so the administrator can have an opportunity to setup
new connected line information. Unfortunately, the Dial and Queue I
option is disabled for *all* forked calls if one of those calls is
redirected.
* Make the Dial and Queue I option apply to each outgoing call leg
independently. Now if one outgoing call leg is locally redirected, the
other outgoing calls are not affected.
* Made Dial not pass any redirecting updates when forking calls.
Redirecting updates do not make sense for this scenario.
* Made Queue not pass any redirecting updates when using the ringall
strategy. Redirecting updates do not make sense for this scenario.
* Fixed deadlock potential with chan_local when Dial and Queue send
redirecting updates for a local redirect.
* Converted the Queue stillgoing flag to a boolean bitfield.
(closes issue ASTERISK-19511)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1920/
........
Merged revisions 367678 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367679 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a number of methods for controlling the setting of 'ringinuse'
which is basically the same concept as the old ignorebusy setting,
only now the per member setting always controls whether or not the
member is actually ringed while in use. A CLI command and a manager
action have been added to change a given queue member's ringinuse
option while Asterisk is running and the an argument has been added
for adding members with deliberately set ringinuse in queues.conf
Some effort has been made to ensure compatability with dialplans and
databases still referring to 'ignorebusy'.
(issue ASTERISK-19536)
reported by: Philippe Lindheimer
Review: https://reviewboard.asterisk.org/r/1919/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a number of memory leaks in a variety of modules that were
found by a static analysis tool. A brief summary of the changes:
* app_minivm: free ast_str objects on off nominal paths
* app_page: free the ast_dial object if the requested channel technology
cannot be appended to the dialing structure
* app_queue: if a penalty rule failed to match any existing rule list
names, the created rule would not be inserted and its memory
would be leaked
* app_read: dispose of the created silence detector in the presence of
off nominal circumstances
* app_voicemail: dispose of an allocated unique ID field for MWI event
un-subscribe requests in off nominal paths; dispose of
configuration objects when using the secret.conf option
* chan_dahdi: dispose of the allocated frame produced by ast_dsp_process
* chan_iax2: properly unref peer in CLI command "iax2 unregister"
* chan_sip: dispose of the allocated frame produced by sip_rtp_read's
call of ast_dsp_process; free memory in parse unit tests
* func_dialgroup: properly deref ao2 object grhead in nominal path of
dialgroup_read
* func_odbc: free resultset in off nominal paths of odbc_read
* cli: free match_list in off nominal paths of CLI match completion
* config: free comment_buffer/list_buffer when configuration file load
is unchanged; free the same buffers any time they were
created and config files were processed
* data: free XML nodes in various places
* enum: free context buffer in off nominal paths
* features: free ast_call_feature in off nominal paths of applicationmap
config processing
* netsock2: users of ast_sockaddr_resolve pass in an ast_sockaddr struct
that is allocated by the method. Failures in
ast_sockaddr_resolve could result in the users of the method
not knowing whether or not the buffer was allocated. The
method will now not allocate the ast_sockaddr struct if it
will return failure.
* pbx: cleanup hash table traversals in off nominal paths; free
ignore pattern buffer if it already exists for the specified
context
* xmldoc: cleanup various nodes when we no longer need them
* main/editline: various cleanup of pointers not being freed before being
assigned to other memory, cleanup along off nominal paths
* menuselect/mxml: cleanup of value buffer for an attribute when that attribute
did not specify a value
* res_calendar*: responses are allocated via the various *_request method
returns and should not be allocated in the various
write_event methods; ensure attendee buffer is freed if no
data exists in the parsed node; ensure that calendar objects
are de-ref'd appropriately
* res_jabber: free buffer in off nominal path
* res_musiconhold: close the DIR* object in off nominal paths
* res_rtp_asterisk: if we run out of ports, close the rtp socket object and free
the rtp object
* res_srtp: if we fail to create the session in libsrtp, destroy the
temporary ast_srtp object
(issue ASTERISK-19665)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1922
........
Merged revisions 366880 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366881 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Simplify some code in app_dial and app_queue by calling
ast_app_exec_macro() and ast_app_exec_sub().
* Fix minor locking issue in app_dial for post-answer macro/gosub
MACRO/GOSUB_RESULT=GOTO: handling.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363269 65c4cc65-6c06-0410-ace0-fbb531ad65f3