Some providers require a multiple of 20 for the maxptime or fail to complete calls,
e.g. Vivo in Brazil. To increase compatibility, only multiples of 20 are now used.
Resolves: #260
If multiple codecs are available for the same
resource and the translation costs between
multiple codecs are the same, ties are
currently broken arbitrarily, which means a
lower quality codec would be used. This forces
Asterisk to explicitly use the higher quality
codec, ceteris paribus.
ASTERISK-29455
Change-Id: I4b7297e1baca7aac14fe4a3c7538e18e2dbe9fd6
If Asterisk gets G.729 6-byte VAD frames inbound, then at outbound Asterisk sends this G.729 stream with non-continuous timestamps.
This makes the audio stream not-playable at the receiver side.
Linphone isn't able to play such an audio - lots of disruptions are heard.
Also I had complains of bad audio from users which use other types of phones.
After debugging, I found this is a regression connected with RTP Smoother (main/smoother.c).
Smoother has a special code to handle G.729 VAD frames (search for AST_SMOOTHER_FLAG_G729 in smoother.c).
However, this flag is never set in Asterisk-12 and newer.
Previously it has been set (see Asterisk-11).
ASTERISK-29526 #close
Change-Id: I6f51ecb1a3ecd9c6d59ec5a6811a27446e17065d
This was dead code, test code introduced with Asterisk 13. This was
found while analyzing ASTERISK_28416 and ASTERISK_29185. This change
partly fixes, not closes those two issues.
Change-Id: I42d0daa37f6f334c7d86672f06f085858a3f3940
This change adds H.265/HEVC as a known codec and creates a cached
"h265" media format for use.
Note that RFC 7798 section 7.2 also describes additional SDP
parameters. Handling of these is not yet supported.
ASTERISK-28512
Change-Id: I26d262cc4110b4f7e99348a3ddc53bad0d2cd1f2
In review 4843 (ASTERISK-24858), we added a hack that forced a smoother
creation when sending signed linear so that the byte order was adjusted
during transmission. This was needed because smoother flags were lost
during the new format work that was done in Asterisk 13.
Rather than rolling that same hack into res_rtp_multicast, re-introduce
smoother flags so that formats can dictate their own options.
Change-Id: I77b835fba0e539c6ce50014a984766f63cab2c16
This change adds a T.38 format which can be used in a stream
topology to specify that a UDPTL stream needs to be created.
The SDP API has been changed to understand T.38 and create
the UDPTL session, add the attributes, and parse the attributes.
This change does not change the boundary of the T.38 state
machine. It is still up to the channel driver to implement and
act on it (such as queueing control frames or reacting to them).
ASTERISK-26949
Change-Id: If28956762ccb8ead562ac6c03d162d3d6014f2c7
When Opus is negotiated but not loaded, the log is spammed with messages
because the system does not know how to calculate the number of samples in
a frame.
* Suppress the warning by supplying a function that assumes 20ms of
samples in the frame. For pass through support it doesn't really seem to
matter what number of samples is returned anyway.
ASTERISK-26605 #close
Change-Id: Icf2273692f040dc2c45b01e72a790d11092f9e0f
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
Currently when receiving video over RTP we store only
a calculated samples on the frame. When starting the video
it can take some time for this calculation to actually yield
a value as it requires constant changing timestamps. As well
if a video frame passes over multiple RTP packets this calculation
will fail as the timestamp is the same as the previous RTP
packet and the number of samples calculated will be 0.
This change preserves the timestamp on the frame and allows
it to pass through the core. When sending the video this timestamp
is used instead of a new one being calculated.
ASTERISK-26367 #close
Change-Id: Iba8179fb5c14c9443aee4baf670d2185da3ecfbd
Asterisk already supported iLBC 30. This change adds iLBC 20. Now, Asterisk
defaults to iLBC 20 but falls back to iLBC 30, when the remote party requests
this.
ASTERISK-26218 #close
ASTERISK-26221 #close
Reported by: Aaron Meriwether
Change-Id: I07f523a3aa1338bb5217a1bf69c1eeb92adedffa
This commit adds scaffolding in order to support the SILK audio format
on calls. Roughly, this is what is added:
* Cached silk formats. One for each possible sample rate.
* ast_codec structures for each possible sample rate.
* RTP payload mappings for "SILK".
In addition, this change overhauls the res_format_attr_silk file in the
following ways:
* The "samplerate" attribute is scrapped. That's native to the format.
* There are far more checks to ensure that attributes have been
allocated before attempting to reference them.
* We do not SDP fmtp lines for attributes set to 0.
These changes make way to be able to install a codec_silk module and
have it actually work. It also should allow for passthrough silk calls
in Asterisk.
Change-Id: Ieeb39c95a9fecc9246bcfd3c45a6c9b51c59380e
Adding format_name even to the end of ast_codec caused issued with
binary codec modules because the pointer would be garbage in asterisk
when they registered. So, the ast_codec structure was reverted and an
internal_ast_codec structure was created just for use in codec.c. A new
internal-only API was also added (__ast_codec_register_with_format) so
that codec_builtin could register codecs with the format_name in a
separate parameter rather than in the ast_codec structure.
ASTERISK-26144 #close
Reported-by: Alexei Gradinari
Change-Id: I6df1b08f6a6ae089db23adfe1ebc8636330265ba
If you create a local channel and don't specify an originator channel
to take capabilities from, we automatically add all audio formats to
the new channel's capabilities. When we try to make the channel
compatible with another, the "best format" functions pick the best
format available, which in this case will be slin192. While this is
great for preserving quality, it's the worst for performance and
overkill for the vast majority of applications.
In the absense of any other information, adding all formats is the
correct thing to do and it's not always possible to supply an
originator so a new parameter 'formats' has been added to the channel
create/originate functions. It's just a comma separated list of formats
to make availalble for the channel. Example: "ulaw,slin,slin16".
'formats' and 'originator' are mutually exclusive.
To facilitate determination of format names, the format name has been
added to "core show codecs".
ASTERISK-26070 #close
Change-Id: I091b23ecd41c1b4128d85028209772ee139f604b
In September 2006, the maximum packetization time (ptime) were set to such a
low value, packetization was disabled for many codecs actually. This was fixed
for many codecs but not for iLBC 30. This enables packetization for iLBC which
can be enabled for example via allow=ilbc:60,gsm,alaw,ulaw in the file sip.conf.
ASTERISK-7803
Change-Id: I2ef90023d35efb7cb8fe96ed74f53f6846ffad12
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
Andreas Eversberg
Eduardo
Naveen Albert
under
Alexander Traud
Florian Floimair
Joshua Colp
Sean Bright
Richard Mudgett
Corey Farrell
Mark Michelson
George Joseph
Matt Jordan
Scott Griepentrog