This patch adds a new CLI command, 'stun show status'. This command will show
a table describing all known STUN servers and statuses.
(closes issue ASTERISK-18046)
Reported by: Jeremy Kister
Tested by: Jeremy Kister
patches:
(stun-show-status-v4-trunk.patch license #6232 uploaded by Jeremy Kister)
Review: https://reviewboard.asterisk.org/r/2001
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369681 65c4cc65-6c06-0410-ace0-fbb531ad65f3
options are documented in config sample
sample config rename to proper name - ooh323.conf
To change media address ooh323 send empty TCS if there was
completed TCS exchange or send facility forwardedelements
with new fast start proposal if not.
Then close transmit logical channels and renew TCS exchange.
If new fast start proposal is received then ooh323 stack call back
channel driver routine to change rtp address in the rtp instance.
If empty TCS is received then close transmit logical channels and
renew TCS exchange
Review: https://reviewboard.asterisk.org/r/1607/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Hangup handlers are an alternative to the h extension. They can be used
in addition to the h extension. The idea is to attach a Gosub routine to
a channel that will execute when the call hangs up. Whereas which h
extension gets executed depends on the location of dialplan execution when
the call hangs up, hangup handlers are attached to the call channel. You
can attach multiple handlers that will execute in the order of most
recently added first.
(closes issue ASTERISK-19549)
Reported by: Mark Murawski
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2002/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the core changes necessary to support AMI event documentation
in the source files of Asterisk, and adds documentation to those AMI events
defined in the core application modules. Event documentation is built from
the source by two new python scripts, located in build_tools:
get_documentation.py and post_process_documentation.py.
The get_documentation.py script mirrors the actions of the existing AWK
get_documentation scripts, except that it will scan the entirety of a source
file for Asterisk documentation. Upon encountering it, if the documentation
happens to be an AMI event, it will attempt to extract information about the
event directly from the manager event macro calls that raise the event. The
post_process_documentation.py script combines manager event instances that
are the same event but documented in multiple source files. It generates
the final core-[lang].xml file.
As this process can take longer to complete than a typical 'make all', it
is only performed if a new make target, 'full', is chosen.
Review: https://reviewboard.asterisk.org/r/1967/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a number of methods for controlling the setting of 'ringinuse'
which is basically the same concept as the old ignorebusy setting,
only now the per member setting always controls whether or not the
member is actually ringed while in use. A CLI command and a manager
action have been added to change a given queue member's ringinuse
option while Asterisk is running and the an argument has been added
for adding members with deliberately set ringinuse in queues.conf
Some effort has been made to ensure compatability with dialplans and
databases still referring to 'ignorebusy'.
(issue ASTERISK-19536)
reported by: Philippe Lindheimer
Review: https://reviewboard.asterisk.org/r/1919/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch improves the handling of call id logging significantly with regard
to transfers and adding APIs to better handle specific aspects of logging.
Also, changes have been made to chan_sip in order to better handle the creation
of callids and to enable the monitor thread to bind itself to a particular
call id when a dialog is determined to be related to a callid. It then unbinds
itself before returning to normal monitoring.
review: https://reviewboard.asterisk.org/r/1886/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If enabled using the keepalive option in sip.conf a small packet will be sent
at a regular interval to keep the NAT mapping open. This is lightweight as the
remote side does not need to parse and handle a SIP message.
(closes issue AST-783)
Review: https://reviewboard.asterisk.org/r/1756/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add two new dialplan functions: FEATURE() and FEATUREMAP(). FEATURE()
lets you set some of the configuration options from the [general] section
of features.conf on a per-channel basis. FEATUREMAP() lets you customize
the key sequence used to activate built-in features, such as blindxfer,
and automon. See the built-in documentation for details.
Review: https://reviewboard.asterisk.org/r/1871/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364437 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk has a setting for the minimum allowed DTMF. If we get shorter
DTMF tones, these will be changed to the minimum on the outbound call
leg.
(closes issue ASTERISK-19772)
Review: https://reviewboard.asterisk.org/r/1882/
Reported by: oej
Tested by: oej
Patches by: oej
Thanks to the reviewers.
1.8 branch for this patch: agave-dtmf-duration-asterisk-conf-1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ISDN ETSI PTP and Q.SIG (And SS7 in future) have support for reporting who
was the original redirecting party of a call.
* Added support for the original redirecting party and reason to the
REDIRECTING function and the system core as well as to the stubbed
locations in sig_pri.c.
Review: https://reviewboard.asterisk.org/r/1829/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362779 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The current Security Events Framework API only supports IPv4 when it comes to
generating security events. This patch does the following:
* Changes the Security Events Framework API to support IPV6 and updates
the components that use this API.
* Eliminates an error message that was being generated since the current
implementation was treating an IPv6 socket address as if it was IPv4.
* Some copyright dates were updated on files touched by this patch.
(closes issue ASTERISK-19447)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
security_events_ipv6v3.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/1777/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Hangup now can take a regular expression as the Channel option. If you want
to hangup multiple channels, use /regex/ as the Channel option. Existing
behavior to hanging up a single channel is unchanged, but if you pass a regex,
the manager will send you a list of channels back that were hung up.
(closes issue ASTERISK-19575)
Reported by: Mark Murawski
Tested by: Mark Murawski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added 'b' and 'B' options to Dial. These options will allow you to run
last-minute dialplan on the caller and callee channels while the Dial
application is executing, but before the call is started. For example you
can use the 'b' option to run dialplan on the callee channel to get the name
of the newly created channel right away.
Review: https://reviewboard.asterisk.org/r/1229/
(closes issue: ASTERISK-19548)
Reported by: Mark Murawski
Tested by: Mark Murawski, Stefan Schmidt
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added ability to use multiple lines on phone, so for one device in configuration multiple lines can be defined, it allows to have multiple calls on one phone, callwaiting and switching between calls.
* Added ability for translation on-screen menu to multiple languages. Tested on Russian languages. Supported encodings: ISO 8859-1, ISO 8859-2, ISO 8859-4, ISO 8859-5, ISO 2022-JP. Language controlled by 'language' and on-screen menu of phone
* Other described in CHANGES file
Testing done by issue tracker users: ibercom, scsiborg, idarwin, TeknoJuce, c0rnoTa.
Tested on production system by Jonn Taylor (jonnt) using phone models: Nortel i2004, 1120E and 1140E.
(closes issue ASTERISK-16890)
Review: https://reviewboard.asterisk.org/r/1243/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For analog lines, enables Asterisk to use dialtone detection per channel
if an incoming call was hung up before it was answered. If dialtone is
detected, the call is hung up.
no: Disabled. (Default)
yes: Look for dialtone for 10000 ms after answer.
<number>: Look for dialtone for the specified number of ms after answer.
always: Look for dialtone for the entire call. Dialtone may return
if the far end hangs up first.
dialtone_detect=yes
dialtone_detect=5000
dialtone_detect=always
(closes issue ASTERISK-19316)
Reported by: Jeremy Pepper
Patch by: Jeremy Pepper
Tested by: rmudgett,Jeremy Pepper
Review: https://reviewboard.asterisk.org/r/1737/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
send_diversion=no will prevent Diversion headers from being added to SIP
requests. This doesn't prevent Diversion from being added with dialplan
such as with SIPAddHeader.
(closes issue ASTERISK-16862)
Reported by: rsw686
Review: https://reviewboard.asterisk.org/r/1769/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356987 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change permits each verbose destination (consoles, logger) to have its
own concept of what the verbosity level is. The big feature here is that
the logger will now be able to capture a particular verbosity level without
condemning each console to need to suffer that level of verbosity.
Additionally, a stray 'core set verbose' will no longer change what will go
to the log.
Review: https://reviewboard.asterisk.org/r/1599/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a variable AGIEXITONHANGUP for res_agi. If this variable is
set to "yes" on a channel, AGI() will exit immediately once a channel hangup
has been detected. This was the behavior of AGI() in Asterisk 1.4 and earlier
and is still desired by some people.
Review: https://reviewboard.asterisk.org/r/1734/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355102 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the auto_force_rport and auto_comedia NAT options. It
also converts the nat= setting to a list of comma-separated combinable
options: no, force_rport, comedia, auto_force_rport, and auto_comedia.
nat=yes remains as an undocumented option equal to
"force_rport,comedia". The first instance of 'yes' or 'no' in the list
stops parsing and overrides any previously set options. If an auto_*
option is specified with its non-auto_ counterpart, the auto setting
takes precedence.
This patch builds upon the patch posted to ASTERISK-17860 by JIRA user
pedro-garcia.
(closes issue ASTERISK-17860)
Review: https://reviewboard.asterisk.org/r/1698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is based on the one by David Vossel, developer extrodinaire, at
https://reviewboard.asterisk.org/r/344/. If multiple peers are defined with the
same host/port, but differing callbackextensions, it chooses the peer with the
matching callbackextension. Since callbackextension creates an outbound
registration with the callbackextension as the Contact address, matching an
incoming request by that (in addition to the host/port) makes a lot of sense.
This patch also adds support for callbackextension to realtime by querying all
peers with callbackextensions on reload and adding registrations for them.
(closes issue ASTERISK-13456)
Review: https://reviewboard.asterisk.org/r/344/
Review: https://reviewboard.asterisk.org/r/1717/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes res_ais and introduces a new module, res_corosync.
The OpenAIS project is deprecated and is now just a wrapper around
Corosync. This module provides the same functionality using the same
core infrastructure, but without the use of the deprecated components.
Technically res_ais could have been used with an AIS implementation other
than OpenAIS, but that is the only one I know of that was ever used.
Review: https://reviewboard.asterisk.org/r/1700/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk is used with various third-party libraries (CURL, PostgresSQL,
many others) that have the ability themselves to use OpenSSL, it is possible
for conflicts to arise in how the OpenSSL libraries are initialized and
shutdown. This patch addresses these conflicts by 'wrapping' the important
functions from the OpenSSL libraries in a new shared library that is part
of Asterisk itself, and is loaded in such a way as to ensure that *all*
calls to these functions will be dispatched through the Asterisk wrapper
functions, not the native functions.
This new library is optional, but enabled by default. See the CHANGES file
for documentation on how to disable it.
Along the way, this patch also makes a few other minor changes:
* Changes MODULES_DIR to ASTMODDIR throughout the build system, in order to
more closely match what is used during run-time configuration.
* Corrects some errors in the configure script where AC_CHECK_TOOLS was used
instead of AC_PATH_PROG.
* Adds a new variable for linker flags in the build system (DYLINK), used for
producing true shared libraries (as opposed to the dynamically loadable
modules that the build system produces for 'regular' Asterisk modules).
* Moves the Makefile bits that handle installation and uninstallation of the
main Asterisk binary into main/Makefile from the top-level Makefile.
* Moves a couple of useful preprocessor macros from optional_api.h to
asterisk.h.
Review: https://reviewboard.asterisk.org/r/1006/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix authenticate MESSAGE losing custom headers added by the MESSAGE_DATA
function in the authorization attempt.
* Pass up better From header contents for SIP to use. Now is in the
"display-name" <URI> format expected by MessageSend. (Note that this is a
behavior change that could concievably affect some people.)
* Block user from adding standard headers that are added automatically.
(To, From,...)
* Allow the user to override the Content-Type header contents sent by
MessageSend.
* Decrement Max-Forwards header if the user transferred it from an
incoming message.
* Expand SIP short header names so the dialplan and other code only has to
deal with the full names.
* Documents what SIP expects in the MessageSend(from) parameter.
(closes issue ASTERISK-18992)
Reported by: Yuri
(closes issue ASTERISK-18917)
Reported by: Shaun Clark
Review: https://reviewboard.asterisk.org/r/1683/
........
Merged revisions 352520 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a feature patch which allows an 'announcement' option to be specified in
musiconhold.conf which should be set to the name of a sound. If a valid sound is
specified for this option, then it will be played on that music on hold class whenever
a channel bound to that class is put on hold as well as when Asterisk is able to detect
that a song has ended before starting the next song (excludes external players).
(closes ASTERISK-18977)
Reported by: Timo Teräs
Patches:
asterisk-moh-announcement.diff uploaded by Timo Teräs (license 5409)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352134 65c4cc65-6c06-0410-ace0-fbb531ad65f3
MixMonitor receives a new option i(channel_variable) which stores the unique id at said
variable. StopMixMonitor now accepts ID as an optional argument, which if included will
make StopMixMonitor specifically target the mixmonitor on that particular channel. CLI
commands and AMI actions have been ammended to work with the IDs as well. In addition,
monitors across a channel can now be listed be listed via CLI command "mixmonitor list
<channel>" which will display all of the mixmonitors active on that channel along with
the files they each have open. Created by Sergio González Martín.
(closes issue ASTERISK-19096)
Reported by: Sergio González Martín
Review: https://reviewboard.asterisk.org/r/1643/
Review: https://reviewboard.asterisk.org/r/1682/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352093 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds per-parking lot options comebackcontext and comebackdialtime
* Makes comebacktoorigin settable per parking lot
* Sets a PARKER channel variable when comebacktoorigin is disabled
(closes issue ASTERISK-16643)
Reported by: Mitch Sharp (bluecrow76)
Patches:
asterisk-1.6.2.17.2-park-features-comebackcontext-consolidated-v3.diff by Mitch Sharp (bluecrow76) license 5231
with updates by me.
Review: https://reviewboard.asterisk.org/r/1674
Review: https://reviewboard.asterisk.org/r/963
Reviewed by Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to better handle RTP sources with strictrtp enabled (which is now default in 10)
using the learning mode to figure out new sources when they change is handled by checking
for a number of consecutive (by sequence number) packets received to an rtp struct
based on a new configurable value called 'probation'. Also, during learning mode instead
of liberally accepting all packets received, we now reject packets until a clear source
has been determined.
Review: https://reviewboard.asterisk.org/r/1663/
........
Merged revisions 351287 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 351289 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows the imapserver, imapport, and imapflags settings to be
overridden for any voicemail user. It also documents the settings in
the sample voicemail.conf file, and updates the voicemail schema to
allow storage of those columns.
(closes issue ASTERISK-16489)
Reporter: Hubert Mickael
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1614/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves destruction of sip peers to immediately after the general section of
sip.conf is read so that autocreatepeer setting can be read before deletion of peers.
If autocreatepeer=persist at reload, then peers created by the autocreatepeer setting
will be skipped when purging the current SIP peer list.
(closes ASTERISK-16508)
Reported by: Kirill Katsnelson
Patches:
017797-kkm-persist-autopeers-1.8.patch uploaded by Kirill Katsnelson (license 5845)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to check the availability of the caller's name, app_voicemail will check for an
audio file in <astspooldir>/recordings/callerids/
This change sets a precedent for where to put recordings of names. Currently the idea is
that recordings here could also be used for applications like confbridge and meetme to
find recorded names in this folder from callerid (when another recording isn't available)
(closes issue ASTERISK-18565)
Reporter: Russell Brown
Patches:
r uploaded by Russel Brown (license 6182)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing, it was discovered that there were a number of side effects
introduced by r346391 and subsequent check-ins related to it (r346429,
r346617, and r346655). This included the /main/stdtime/ test 'hanging',
as well as the remote console option failing to receive the appropriate output
after a period of time.
I only backed out the changes to main/ and utils/, as this was adequate
to reverse the behavior experienced.
(issue ASTERISK-18974)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a caller sends DTMF while the SayUnixTime application is saying the time, The call
would jump to the next extension much like it does during Background(). This patch adds
option 'j' to SayUnixTime which when used employs the old behavior. Also, this patch
allows arguments to sayunixtime to not be used as empty strings in the case of something
like 'sayunixtime(,,,j)' or 'sayunixtime(,,pattern).
(closes issue ASTERISK-16675)
Reported by: jlpedrosa
Patches:
patch_SayUnixTime_noJump.patch uploaded by jlpedrosa (license 5959)
Review: https://reviewboard.asterisk.org/r/956/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matthew Jordan
Alexandr Anikin
Richard Mudgett
Michael L. Young
Jonathan Rose
Sean Bright
Joshua Colp
Russell Bryant
Olle Johansson
Mark Murawki
Mark Michelson
Igor Goncharovskiy
Tilghman Lesher
Terry Wilson
Kinsey Moore
Kevin P. Fleming
Walter Doekes