Users now have the ability to bind the rtpengine instance to a specific IP
address. For example, you want chan_sip (call control) on eth0 but rtp (media)
on eth1.
ASTERISK-24280 #close
Reported by: Paul Belanger
Tested by: Paul Belanger
Review: https://reviewboard.asterisk.org/r/3952/
Patches:
rtpengine.diff uploaded by Paul Belanger
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a few issues:
1) The order of Dial events have been changed when performing a call forward.
The order has now been altered to
1) Dial begins dialing channel A.
2) When A forwards the call to B, we issue the dial end event to channel
A, indicating the dial is being canceled due to a forward to B.
3) When the call to channel B occurs, we then issue a new dial begin to
channel B.
2) Call forwards are now reported on the calling channel, not the peer channel.
3) AMI DialEnd events have been altered to display the extension the call is
being forwarded to when relevant.
4) You can now get the values of channel variables for channels that are not
currently in the Stasis application. This brings the retrieval of channel
variables more in line with the rest of channel read operations since they
may be performed on channels not in Stasis.
ASTERISK-24134 #close
Reported by Matt Jordan
ASTERISK-24138 #close
Reported by Matt Jordan
Patches:
forward-shenanigans.diff uploaded by Matt Jordan (License #6283)
Review: https://reviewboard.asterisk.org/r/3899
........
Merged revisions 420794 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch gives the optional ability to keep queue rules in RealTime. It is
important to note that with this patch:
(a) Queue rules in RealTime are only examined on module load/reload
(b) Queue rules are loaded both from the queuerules.conf file as well as the
RealTime backend
To inform app_queue to examine RealTime for queue rules, a new setting has been
added to queuerules.conf's general section "realtime_rules". RealTime queue
rules will only be used when this setting is set to "yes".
The schema for the database table supports a rule_name, time, min_penalty, and
max_penalty columns. min_penalty and max_penalty can be relative, if a '-' or
'+' literal is provided. Otherwise, the penalties are treated as constants.
For example:
rule_name, time, min_penalty, max_penalty
'default', '10', '20', '30'
'test2', '20', '30', '55'
'test2', '25', '-11', '+1111'
'test2', '400', '112', '333'
'test3', '0', '4564', '46546'
'test_rule', '40', '15', '50'
which would result in :
Rule: default
- After 10 seconds, adjust QUEUE_MAX_PENALTY to 30 and adjust
QUEUE_MIN_PENALTY to 20
Rule: test2
- After 20 seconds, adjust QUEUE_MAX_PENALTY to 55 and adjust
QUEUE_MIN_PENALTY to 30
- After 25 seconds, adjust QUEUE_MAX_PENALTY by 1111 and adjust
QUEUE_MIN_PENALTY by -11
- After 400 seconds, adjust QUEUE_MAX_PENALTY to 333 and adjust
QUEUE_MIN_PENALTY to 112
Rule: test3
- After 0 seconds, adjust QUEUE_MAX_PENALTY to 46546 and adjust
QUEUE_MIN_PENALTY to 4564
Rule: test_rule
- After 40 seconds, adjust QUEUE_MAX_PENALTY to 50 and adjust
QUEUE_MIN_PENALTY to 15
If you use RealTime, the queue rules will be always reloaded on a module
reload, even if the underlying file did not change. With the option disabled,
the rules will only be reloaded if the file was modified.
Review: https://reviewboard.asterisk.org/r/3607/
ASTERISK-23823 #close
Reported by: Michael K
patches:
app_queue.c_realtime_trunk.patch uploaded by Michael K (License 6621)
........
Merged revisions 420624 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420625 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r420089 | mjordan | 2014-08-05 15:10:52 -0500 (Tue, 05 Aug 2014) | 72 lines
ARI: Add channel technology agnostic out of call text messaging
This patch adds the ability to send and receive text messages from various
technology stacks in Asterisk through ARI. This includes chan_sip (sip),
res_pjsip_messaging (pjsip), and res_xmpp (xmpp). Messages are sent using the
endpoints resource, and can be sent directly through that resource, or to a
particular endpoint.
For example, the following would send the message "Hello there" to PJSIP
endpoint alice with a display URI of sip:asterisk@mycooldomain.org:
ari/endpoints/sendMessage?to=pjsip:alice&from=sip:asterisk@mycooldomain.org&body=Hello+There
This is equivalent to the following as well:
ari/endpoints/PJSIP/alice/sendMessage?from=sip:asterisk@mycooldomain.org&body=Hello+There
Both forms are available for message technologies that allow for arbitrary
destinations, such as chan_sip.
Inbound messages can now be received over ARI as well. An ARI application that
subscribes to endpoints will receive messages from those endpoints:
{
"type": "TextMessageReceived",
"timestamp": "2014-07-12T22:53:13.494-0500",
"endpoint": {
"technology": "PJSIP",
"resource": "alice",
"state": "online",
"channel_ids": []
},
"message": {
"from": "\"alice\" <sip:alice@127.0.0.1>",
"to": "pjsip:asterisk@127.0.0.1",
"body": "Watson, come here.",
"variables": []
},
"application": "testsuite"
}
The above was made possible due to some rather major changes in the message
core. This includes (but is not limited to):
- Users of the message API can now register message handlers. A handler has
two callbacks: one to determine if the handler has a destination for the
message, and another to handle it.
- All dialplan functionality of handling a message was moved into a message
handler provided by the message API.
- Messages can now have the technology/endpoint associated with them.
Various other properties are also now more easily accessible.
- A number of ao2 containers that weren't really needed were replaced with
vectors. Iteration over ao2_containers is expensive and pointless when
the lifetime of things is well defined and the number of things is very
small.
res_stasis now has a new file that makes up its structure, messaging. The
messaging functionality implements a message handler, and passes received
messages that match an interested endpoint over to the app for processing.
Note that inadvertently while testing this, I reproduced ASTERISK-23969.
res_pjsip_messaging was incorrectly parsing out the 'to' field, such that
arbitrary SIP URIs mangled the endpoint lookup. This patch includes the
fix for that as well.
Review: https://reviewboard.asterisk.org/r/3726
ASTERISK-23692 #close
Reported by: Matt Jordan
ASTERISK-23969 #close
Reported by: Andrew Nagy
........
r420090 | mjordan | 2014-08-05 15:16:37 -0500 (Tue, 05 Aug 2014) | 2 lines
Remove automerge properties :-(
........
r420097 | mjordan | 2014-08-05 16:36:25 -0500 (Tue, 05 Aug 2014) | 2 lines
test_message: Fix strict-aliasing compilation issue
........
Merged revisions 420089-420090,420097 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Now when running PJSIPShowEndpoint, you will receive a
ContactStatusDetail for each bound contact that Asterisk
is qualifying. This information includes the URI of the
contact, current reachability, and roundtrip time.
AFS-91 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/3797
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new module to Asterisk, res_hep_rtcp. The module subscribes
to the RTCP topics in Stasis and receives RTCP information back from the
message bus. It encodes into HEPv3 packets and sends the information to the
res_hep module for transmission.
Using this, someone with a Homer server can get live call quality monitoring
for all RTP-based channels in their Asterisk 12+ systems.
In addition, there were a few bugs in the RTP engine, res_rtp_asterisk, and
chan_pjsip that were uncovered by the tests written for the Asterisk Test
Suite. This patch fixes the following:
1) chan_pjsip failed to set its channel unique ids on its RTP instance on
outbound calls. It now does this in the appropriate location, in the
serialized call callback.
2) The rtp_engine was overflowing some values when packed into JSON.
Specifically, some longs and unsigned ints can't be be packed into integer
values, for obvious reasons. Since libjansson only supports integers,
floats, strings, booleans, and objects, we print these values into strings.
3) res_rtp_asterisk had a few problems:
(a) it would emit a source IP address of 0.0.0.0 if bound to that IP
address. We now use ast_find_ourip to get a better IP address, and
properly marshal the result into an ast_strdupa'd string.
(b) Reports can be generated with no report bodies. In particular, this
occurs when a sender is transmitting information to a receiver (who
will send no RTP back to the sender). As such, the sender has no report
body for what it received. We now properly handle this case, and the
sender will emit SR reports with no body. Likewise, if we receive an
RTCP packet with no report body, we will still generate the appropriate
events.
ASTERISK-24119 #close
........
Merged revisions 419823 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r419565 | mjordan | 2014-07-25 09:41:23 -0500 (Fri, 25 Jul 2014) | 21 lines
ARI: report duration values in LiveRecording objects
This patch adds three new fields to the LiveRecording model:
- total_duration: the total length of the live recording
- talking_duration: optional. The duration of talking energy that was
detected while the recording was made.
- silence_duration: optional. The duration of silence that was detected while
the recording was made.
These values are reported in the RecordingFinished ARI event.
When a DSP is enabled on the channel during the recording - which occurs when
the recording is created with max_silence_seconds (indicating that the user
actually cares about how much silence is in the file), we will report the
talking_duration and silence_duration in addition to the total_duration.
Review: https://reviewboard.asterisk.org/r/3770/
ASTERISK-24037 #close
Reported by: Samuel Galarneau
........
r419566 | mjordan | 2014-07-25 09:46:15 -0500 (Fri, 25 Jul 2014) | 1 line
Update CHANGES for r419565
........
Merged revisions 419565-419566 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous behavior was to simply set the accountcode of an outgoing
channel to the accountcode of the channel initiating the call. It was
done this way a long time ago to allow the accountcode set on the SIP/100
channel to be propagated to a local channel so the dialplan execution on
the Local;2 channel would have the SIP/100 accountcode available.
SIP/100 -> Local;1/Local;2 -> SIP/200
Propagating the SIP/100 accountcode to the local channels is very useful.
Without any dialplan manipulation, all channels in this call would have
the same accountcode.
Using dialplan, you can set a different accountcode on the SIP/200 channel
either by setting the accountcode on the Local;2 channel or by the Dial
application's b(pre-dial), M(macro) or U(gosub) options, or by the
FollowMe application's b(pre-dial) option, or by the Queue application's
macro or gosub options. Before Asterisk v12, the altered accountcode on
SIP/200 will remain until the local channels optimize out and the
accountcode would change to the SIP/100 accountcode.
Asterisk v1.8 attempted to add peeraccount support but ultimately had to
punt on the support. The peeraccount support was rendered useless because
of how the CDR code needed to unconditionally force the caller's
accountcode onto the peer channel's accountcode. The CEL events were thus
intentionally made to always use the channel's accountcode as the
peeraccount value.
With the arrival of Asterisk v12, the situation has improved somewhat so
peeraccount support can be made to work. Using the indicated example, the
the accountcode values become as follows when the peeraccount is set on
SIP/100 before calling SIP/200:
SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200
acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200
peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100
If a channel already has an accountcode it can only change by the
following explicit user actions:
1) A channel originate method that can specify an accountcode to use.
2) The calling channel propagating its non-empty peeraccount or its
non-empty accountcode if the peeraccount was empty to the outgoing
channel's accountcode before initiating the dial. e.g., Dial and
FollowMe. The exception to this propagation method is Queue. Queue will
only propagate peeraccounts this way only if the outgoing channel does not
have an accountcode.
3) Dialplan using CHANNEL(accountcode).
4) Dialplan using CHANNEL(peeraccount) on the other end of a local
channel pair.
If a channel does not have an accountcode it can get one from the
following places:
1) The channel driver's configuration at channel creation.
2) Explicit user action as already indicated.
3) Entering a basic or stasis-mixing bridge from a peer channel's
peeraccount value.
You can specify the accountcode for an outgoing channel by setting the
CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue
applications. Queue adds the wrinkle that it will not overwrite an
existing accountcode on the outgoing channel with the calling channels
values.
Accountcode and peeraccount values propagate to an outgoing channel before
dialing. Accountcodes also propagate when channels enter or leave a basic
or stasis-mixing bridge. The peeraccount value only makes sense for
mixing bridges with two channels; it is meaningless otherwise.
* Made peeraccount functional by changing accountcode propagation as
described above.
* Fixed CEL extracting the wrong ie value for the peeraccount. This was
done intentionally in Asterisk v1.8 when that version had to punt on
peeraccount.
* Fixed a few places dealing with accountcodes that were reading from
channels without the lock held.
AFS-65 #close
Review: https://reviewboard.asterisk.org/r/3601/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Say you wanted to include variables in an application map and have those
variables substituted and passed along to the application being executed;
currently this does not happen.
This patch adds this ability to pass channel variable values to an
application before being executed.
ASTERISK-22608 #close
Reported by: Michael L. Young
patches:
features_substitute_arguments_v2.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/3819/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419252 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We have a new periodic beep feature but sometimes a user needs some sort of
feedback, without the need to have a periodic beep during the recording, to let
them know that MixMonitor started recording or ended the recording. The use
case where this patch is being used is when using Dynamic Features to start and
end MixMonitor.
This patch adds an option to play a beep when MixMonitor starts and an option to
play a beep when MixMonitor ends.
ASTERISK-24051 #close
Reported by: Michael L. Young
patches:
mixmonitor-play-beep-start-stop.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/3820/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419238 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new operation for stored recordings, copy. It takes an
existing stored recording and makes a copy of it in the same directory
or a relative directory under the stored recording directory.
/ari/recordings/stored/{recordingName}/copy?destinationRecordingName={copy_name}
This is particularly useful for voicemail-esque applications, which may need to
copy or move recordings around a directory structure.
Review: https://reviewboard.asterisk.org/r/3768/
ASTERISK-24036 #close
Reported by: Sam Galarneau
Tested by: Sam Galarneau
........
Merged revisions 419021 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Whenever possible, audiohooks and framehooks will now be copied over
to the channel that the masquerading channel gets cloned into. This
should occur for all audiohooks and most framehooks. As a result,
in Asterisk 12.5 and up, the AUDIOHOOK_INHERIT function is now
deprecated and its behavior is essentially the new default for all
audiohooks, plus some additional audiohooks/framehooks.
Review: https://reviewboard.asterisk.org/r/3721/
........
Merged revisions 418914 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418936 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most channel drivers let you specify a default accountcode to be set on
channels associated with a particular peer/endpoint/object. Prior to this
patch, chan_pjsip/res_pjsip did not support such a setting.
This patch adds a new setting to the res_pjsip endpoint object, 'accountcode'.
When a channel is created that is associated with an endpoint with this value
set, the channel will automatically have its accountcode property set to the
value configured for the endpoint.
Review: https://reviewboard.asterisk.org/r/3724/
ASTERISK-24000 #close
Reported by: Matt Jordan
........
Merged revisions 418756 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for the PostgreSQL application_name connection setting.
When the appropriate PostgreSQL module's configuration is set with an
application name, the name will be passed to PostgreSQL on connection and
displayed in the database's pg_stat_activity view, as well as in CSV logs. This
aids in managing which applications/servers are connected to a PostgreSQL
database, as well as tracing the activity of those connections.
Review: https://reviewboard.asterisk.org/r/3591
ASTERISK-23737 #close
Reported by: Gergely Domodi
patches:
pgsql_application_name.patch uploaded by Gergely Domodi (License 6610)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Billing records are fair,
To get paid is quite bright,
You should really use ODBC;
Good-bye cdr_sqlite.
Microsoft did once push H.323,
Hell, we all remember NetMeeting.
But try to compile chan_h323 now
And you will take quite a beating.
The XMPP and SIP war was fierce,
And in the distant fray
Was birthed res_jabber/chan_jingle;
But neither to stay.
For everyone did care and chase what Google professed.
"Free Internet Calling" was what devotees cried,
But Google did change the specs so often
That the developers were happy the day chan_gtalk died.
And then there was that odd application
Dedicated to the Polish tongue.
app_saycountpl was subsumed by Say;
One could say its bell was rung.
To read and parse a file from the dialplan
You could (I guess) use an application.
app_readfile did fill that purpose, but I think
A function is perhaps better in its creation.
Barging is rude, I'm not sure why we do it.
Inwardly, the caller will probably sigh.
But if you really must do it,
Don't use app_dahdibarge, use ChanSpy.
We all despise the sound of tinny robots
It makes our queues so cold.
To control such an abomination
It's better to not use Wait/SetMusicOnHold.
It's often nice to know properties of a channel
It makes our calls right
We have a nice function called CHANNEL
And so SIPCHANINFO is sent off into the night.
And now things get odd;
Apparently one could delimit with a colon
Properties from the SIPPEER function!
Commas are in; all others are done.
Finally, a word on pipes and commas.
We're sorry. We can't say it enough.
But those compatibility options in asterisk.conf;
To maintain them forever was just too tough.
This patch removes:
* cdr_sqlite
* chan_gtalk
* chan_jingle
* chan_h323
* res_jabber
* app_saycountpl
* app_readfile
* app_dahdibarge
It removes the following applications/functions:
* WaitMusicOnHold
* SetMusicOnHold
* SIPCHANINFO
It removes the colon delimiter from the SIPPEER function.
Finally, it also removes all compatibility options that were configurable from
asterisk.conf, as these all applied to compatibility with Asterisk 1.4 systems.
Review: https://reviewboard.asterisk.org/r/3698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch enables Perfect Forward Secrecy (PFS) in Asterisk's core TLS API.
Modules that wish to enable PFS should consider the following:
- Ephemeral ECDH (ECDHE) is enabled by default. To disable it, do not
specify a ECDHE cipher suite in a module's configuration, for example:
tlscipher=AES128-SHA:DES-CBC3-SHA
- Ephemeral DH (DHE) is disabled by default. To enable it, add DH parameters
into the private key file, i.e., tlsprivatekey. For an example, see the
default dh2048.pem at
http://www.opensource.apple.com/source/OpenSSL098/OpenSSL098-35.1/src/apps/dh2048.pem?txt
- Because clients expect the server to prefer PFS, and because OpenSSL sorts
its cipher suites by bit strength, (see "openssl ciphers -v DEFAULT")
consider re-ordering your cipher suites in the conf file. For example:
tlscipher=AES128+kEECDH:AES128+kEDH:3DES+kEDH:AES128-SHA:DES-CBC3-SHA:-ADH:-AECDH
will use PFS when offered by the client. Clients which do not offer PFS
fall-back to AES-128 (or even 3DES as recommend by RFC 3261).
Review: https://reviewboard.asterisk.org/r/3647/
ASTERISK-23905 #close
Reported by: Alexander Traud
patches:
tlsPFS_for_HEAD.patch uploaded by Alexander Traud (License 6520)
tlsPFS.patch uploaded by Alexander Traud (License 6520)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417803 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for the Japanese language to both the say family of
applications, as well as for VoiceMail and VoiceMailMain. A new pack of
language sounds will be released at the same time as the next major version
of Asterisk to support the new language features.
The language features can be enabled using a language code of 'ja'.
Review: https://reviewboard.asterisk.org/r/3477
ASTERISK-23324 #close
Reported by: Kevin McCoy
patches:
app_voicemail.c.20140226.jb.patch uploaded by Kevin McCoy (License 6586)
say.c.20140226.jb.patch uploaded by Kevin McCoy (License 6586)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417591 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch enables the jack-audiohook to cope with dynamic sampling rates from
and to Asterisk. Information from the channel is taken to derive the channel's
sampling rate, suiting SLINxx format and frame->datalen.
There are stil a few limitations after this patch:
* Required information is taken from the channel during initialization as
the audiohook does not provide this information.
Audiohook.internal_sampl_rate(...) is set later, but no callback is available
to inform app_jack.
* Frame.datalen is computed using "rate / 50" assuming a ptime of 20ms.
There is no internal API available to determine datalen for a SLINxx.
* Ringbuffer size is now dynamic depending on the value of frame.datalen
(see above) and the number of frames, which are in RINGBUFFER_FRAME_CAPACITY,
that need to fit.
Review: https://reviewboard.asterisk.org/r/3618
Note that the patch being committed here is based on the patch posted on
ASTERISK-23836. However, Matthis Schmieder also provided a patch to enable
this functionality, and that patch is noted below.
ASTERISK-20696 #close
Reported by: Matthis Schmieder
patches:
app_jack.patch uploaded by Matthis Schmieder (License 6445)
ASTERISK-23836 #close
Reported by: Dennis Guse
patches:
patch-app_jack.c uploaded by Dennis Guse (License 6513)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* SS7 support now requires libss7 v2.0 or later. The new libss7 is not
backwards compatible.
* Added SS7 support for connected line and redirecting.
* Most SS7 CLI commands are reworked as well as new SS7 commands added.
See online CLI help.
* Added several SS7 config option parameters described in
chan_dahdi.conf.sample.
* ISUP timer support reworked and now requires explicit configuration.
See ss7.timers.sample.
Special thanks to Kaloyan Kovachev for his support and persistence in
getting the original patch by adomjan updated and ready for release.
SS7-27 #close
Reported by: adomjan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new channel function TALK_DETECT that, when set on a
channel, causes events indicating the start/stop of talking on a channel to be
emitted to both AMI and ARI clients.
The function allows setting both the silence threshold (the length of silence
after which we decide no one is talking) as well as the talking threshold (the
amount of energy that counts as talking). Parameters can be updated on a channel
after talk detection has been enabled, and talk detection can be removed at
any time.
The events raised by the function use a nomenclature similar to existing AMI/ARI
events.
For AMI: ChannelTalkingStart/ChannelTalkingStop
For ARI: ChannelTalkingStarted/ChannelTalkingFinished
Review: https://reviewboard.asterisk.org/r/3563/
#ASTERISK-23786 #close
Reported by: Matt Jordan
........
Merged revisions 414934 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414935 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Improvements to the agent pool functionality.
* AgentRequest no longer hangs up the caller if the agent fails to connect
with the caller. It now continues in the dialplan.
* AgentRequest returns AGENT_STATUS set to NOT_CONNECTED if the agent
failed to connect with the call. Most likely because the agent did not
acknowledge the call in time or got disconnected.
* The agent alerting play file configured by the agent.conf custom_beep
option can now be disabled by setting the option to an empty string. The
agent is effectively alerted to a call presence when MOH stops.
* Fixed bridge reference leak when the agent connects with a caller.
ASTERISK-23499 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3551/
........
Merged revisions 414747 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414748 65c4cc65-6c06-0410-ace0-fbb531ad65f3
User events can now be generated from ARI. Events can be signalled with
arbitrary json variables, and include one or more of channel, bridge, or
endpoint snapshots. An application must be specified which will receive
the event message (other applications can subscribe to it). The message
will also be delivered via AMI provided a channel is attached. Dialplan
generated user event messages are still transmitted via the channel, and
will only be received by a stasis application they are attached to or if
the channel is subscribed to.
This change also introduces the multi object blob mechanism used to send
multiple snapshot types in a single message. The dialplan app UserEvent
was also changed to use multi object blob, and a new stasis message type
created to handle them.
ASTERISK-22697 #close
Review: https://reviewboard.asterisk.org/r/3494/
........
Merged revisions 414405 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Added the unistim.conf variable dtmf_duration which can select the DTMF playback duration from 0ms to 150ms (0 is off and is the new default)
2) Enabled the transmission of month names, which are sent with the date and changed the dateformat variable to accept the values 0-3 as per the UNISTIM standard (2 & 3 match the previous 1 & 2 formats).
3) Enabled the "Mute" packet so muting microphone works as expected and microphone muted for all calls while LED light on
4) Changed Duree to Timer on i2004 display
(closes issue ASTERISK-23592)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r411189, some behavior was changed which made sendrpid behavior
act in a more trusting manner by sending full user data for peers
set with private caller presence in P-Asserted-Identity headers.
Since this changed long time expected behaviors, we decided to pull
that patch when that was pointed out by the community. Instead, this
patch provides a trust_id_outbound setting which will expose the data
per RFC-3325 if set to 'yes' and simply not send the PAI/RPID headers
at all if set to 'no'. By default trust_id_outbound will be set to
'legacy' which will preserve the behavior prior to these patches.
Extra special thanks to Walter Doekes for providing advice and
feedback.
(closes issue AST-1301)
(closes issue ASTERISK-19465)
Reported by: Krzysztof Chmielewski
Review: https://reviewboard.asterisk.org/r/3447/
........
Merged revisions 412744 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412746 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412747 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412759 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a tones URI type to the playback resource. The tone can be specified by
name (from indications.conf) or by a tone pattern. In addition, tonezone can
be specified in the URI (by appending ;tonezone=<zone>). Tones must be
stopped manually in order for a stasis control to move on from playback of
the tone. Tones may be paused, resumed, restarted, and stopped. They may
not be rewound or fast forwarded (tones can't be controlled in a way that
lets you skip around from note to note and pausing and resuming will also
restart the tone from the beginning). Tests are currently in development
for this feature (https://reviewboard.asterisk.org/r/3428/).
(closes issue ASTERISK-23433)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3427/
........
Merged revisions 412535 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is a continuation of https://reviewboard.asterisk.org/r/3349/,
committed in r412303.
It resolves a finding oej had that the phone-context be available in a
channel variable separate from SIPDOMAIN. This patch adds that variable as
SIPURIPHONECONTEXT. It also allows a local number (or global number specified
in the TEL URI) to be used to look up as a peer.
(issue ASTERISK-17179)
Review: https://reviewboard.asterisk.org/r/3349/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add an option to enable a periodic beep to be played into a call if it
is being recorded. If enabled, it uses the PERIODIC_HOOK() function
internally to play the 'beep' prompt into the call at a specified
interval. This option is provided for both Monitor() and
MixMonitor().
Review: https://reviewboard.asterisk.org/r/3424/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for handling TEL URIs in inbound INVITE requests.
This includes the Request URI and the From URI. The number specified in
the Request URI will be the destination of the inbound channel in the dialplan.
The phone-context specified in the Request URI will be stored in the
TELPHONECONTEXT channel variable.
Review: https://reviewboard.asterisk.org/r/3349
ASTERISK-17179 #close
Reported by: Geert Van Pamel
Tested by: Geert Van Pamel
patches:
asterisk-12.0.0-chan_sip-RFC3966_patch.txt uploaded by Geert Van Pamel (License 6140)
asterisk-12.0.0-reqresp_parser-RFC3966_patch.txt uploaded by Geert Van Pamel (License 6140)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a parsing error that occurred during the processing of
the AMI action. The error did not result in MixMonitor itself
misbehaving, but it could result in the AMI response not giving
correct information back.
The new header allows for one to specify a post-process command
to run when recording finishes. Previously, in order to do this,
the post-process command would have to be placed at the end of
the Options: header.
Patches: mixmonitor_command_2.patch by jhardin (License #6512)
........
Merged revisions 412048 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces a new dialplan function, PERIODIC_HOOK().
It allows you run to a dialplan hook on a channel periodically. The
original use case that inspired this was the ability to play a beep
periodically into a call being recorded. The implementation is much
more generic though and could be used for many other things.
The implementation makes heavy use of existing Asterisk components.
It uses a combination of Local channels and ChanSpy() to run some
custom dialplan and inject any audio it generates into an active call.
The other important bit of the implementation is how it figures out
when to trigger the beep playback. This implementation uses the
audiohook API, even though it's not actually touching the audio in any
way. It's a convenient way to get a callback and check if it's time
to kick off another beep. It would be nice if this was timer event
based instead of polling based, but unfortunately I don't see a way to
do it that won't interfere with other things.
Review: https://reviewboard.asterisk.org/r/3362/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the following:
(1) A new module, res_hep, which implements a generic packet capture agent for
the Homer Encapsulation Protocol (HEP) version 3. Note that this code is based
on a patch provided by Alexandr Dubovikov; I basically just wrapped it up,
added configuration via the configuration framework, and threw in a
taskprocessor.
(2) A new module, res_hep_pjsip, which forwards all SIP message traffic that
passes through the res_pjsip stack over to res_hep for encapsulation and
transmission to a HEPv3 capture server.
Much thanks to Alexandr for his Asterisk patch for this code and for a *lot*
of patience waiting for me to port it to 12/trunk. Due to some dithering on
my part, this has taken the better part of a year to port forward (I still
blame CDRs for the delay).
ASTERISK-23557 #close
Review: https://reviewboard.asterisk.org/r/3207/
........
Merged revisions 411534 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411556 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It updates the AMI version to 2.2.0 to indicate backwards compatible
changes have been made since the last release
* It updates the ARI version to 1.2.0 to indicate backwards compatible
changes have been made since the last release
* It updates the UPGRADE/CHANGES files with changes that were not
mentioned
........
Merged revisions 411529 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change turns the bridge type field into a comma separated list of attributes.
These attributes include: mixing, holding, dtmf_events, and proxy_media. By setting
the various attributes a user can control the type of bridge created with the
behavior they need for their application.
(closes issue ASTERISK-23437)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3359/
........
Merged revisions 410904 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change enables DNS client support within PJSIP. System
nameservers are automatically discovered using res_init or
res_ninit. If this fails then PJSIP will resort to using
gethostbyname for resolution.
By enabling this support we gain SRV support, failover, and
weight support.
(closes issue ASTERISK-23435)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3343/
........
Merged revisions 410795 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410796 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch creates the AST_SORCERY dialplan function which allows someone to
retrieve any value from a sorcery-based config file. It's similar to
AST_CONFIG.
The creation of the function itself was fairly straightforward but it required
changes to the underlying sorcery infrastructure that rippled into individual
sorcery objects. The changes stemmed from inconsistencies in how sorcery
created ast_variable objectsets from sorcery objects and the inconsistency
in how individual objects used that feature especially when it came to
parameters that can be specified multiple times like contact in aor and match
in identify. You can read more here...
http://lists.digium.com/pipermail/asterisk-dev/2014-February/065202.html
So, what this patch does, besides actually creating the AST_SORCERY function,
is the following...
* Creates ast_variable_list_append which is a helper to append one ast_variable
list to another.
* Modifies the ast_sorcery_object_field_register functions to accept the
already-defined sorcery_fields_handler callback.
* Modifies ast_sorcery_objectset_create to accept a parameter indicating return
type preference...a single ast_variable with all values concatenated or an
ast_variable list with multiple entries. Also fixed a few bugs.
* Modifies individual sorcery object implementations to use the new function
definition of the ast_sorcery_object_field_register functions.
* Modifies location.c and res_pjsip_endpoint_identifier_ip.c to implement
sorcery_fields_handler handlers so they return multiple occurrences as an
ast_variable_list.
* Added a whole bunch of tests to test_sorcery.
(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3254/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Paul Belanger
Matthew Jordan
Jason Parker
Mark Michelson
Jonathan Rose
Richard Mudgett
Michael L. Young
Kinsey Moore
Scott Griepentrog
Igor Goncharovskiy
Russell Bryant
Joshua Colp
George Joseph