https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277906 | jeang | 2010-07-19 15:16:36 -0500 (Mon, 19 Jul 2010) | 7 lines
Avoid trying to pickup a parked extension before the park operation is completed.
A crash could occur if the extension is picked up while the parking extension is
being announced. Testing pu->notquiteyet while searching for a parked extension
resolves this crash.
(ABE-2418)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are two changes here:
1. Since the externip setting can now have a port attached
to it, calling it "externip" is misleading. The option is now
documented and parsed as "externaddr." This also extends to the
"matchexterniplocally" setting. It is now documented and parsed
as "matchexternaddrlocally." The old names for the options may
still be used, but they are no longer used in the sip.conf.sample
file.
2. If no port is set for the externaddr, and UDP is the transport
to be used, then we will set the port of the externaddr to that of
the udpbindaddr. This was how things worked prior to the IPv6 merge,
so this is a regression fix.
(closes issue #17665)
Reported by: mmichelson
Patches:
17665.diff#2 uploaded by pprindeville (license 347)
Tested by: pprindeville
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ACL test was failing on Mac OS X because it would
convert the above invalid link-local address into
fe80::1234 while reporting no error from getaddrinfo().
Linux does not do this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The issue here is that passing an array to a function prohibits the ARRAY_LEN
macro from returning the real size. To avoid this the size is now defined and
use of ARRAY_LEN is avoided.
(closes issue #15718)
Reported by: alecdavis
Patches:
bug15718.patch uploaded by jpeeler (license 325)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277837 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ACLs can now be configured to match IPv6 networks. This is only
relevant for ACLs in chan_sip for now since other channel drivers
do not support IPv6 addressing. However, once those channel drivers
are outfitted to support IPv6 addressing, the ACLs will already be
ready for IPv6 support.
https://reviewboard.asterisk.org/r/791
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277814 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277568 | tilghman | 2010-07-16 16:54:29 -0500 (Fri, 16 Jul 2010) | 8 lines
Since we split values at the semicolon, we should store values with a semicolon as an encoded value.
(closes issue #17369)
Reported by: gkservice
Patches:
20100625__issue17369.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277625 | tringenbach | 2010-07-16 17:43:39 -0500 (Fri, 16 Jul 2010) | 9 lines
Save and restore AST_FLAG_BRIDGE_HANGUP_DONT on attended transfer.
ast_bridge_call() clears AST_FLAG_BRIDGE_HANGUP_DONT. But during an attended
transfer, ast_bridge_call() is called for a second bridge on the same channel,
and it clears that flag, which still needs to get set for when the original
ast_bridge_call() gets control back and checks it.
Review: https://reviewboard.asterisk.org/r/741
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277497 | mnicholson | 2010-07-16 16:18:38 -0500 (Fri, 16 Jul 2010) | 4 lines
Default to no udptl error correction so that error correction will be disabled in the event that the remote end indicates that they do not support the error correction mode we requested.
FAX-128
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Just say the number of seconds (after minutes) rather than doing some incorrect
calculation with respect to minutes.
(closes issue #17498)
Reported by: corruptor
Patches:
holdesecs_bug.diff uploaded by corruptor (license 253)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277419 | rmudgett | 2010-07-16 15:18:54 -0500 (Fri, 16 Jul 2010) | 15 lines
priexclusive in chan_dahdi.conf ignored when reloading dahdi module
During a reload, the priexclusive and outsignalling parameters are not
read in from the config file as intended. Unfortunately, they get set to
defaults as a result. This patch makes sure that they do not get set to
defaults during a reload.
(closes issue #17441)
Reported by: mtryfoss
Patches:
issue17441_v1.4.patch uploaded by rmudgett (license 664)
issue17441_v1.6.2.patch uploaded by rmudgett (license 664)
issue17441_trunk.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277247 | mnicholson | 2010-07-16 12:29:57 -0500 (Fri, 16 Jul 2010) | 4 lines
For pass through DTMF tones, measure the actual duration between the begin and end packets on the wire. If it is detected to be less than AST_MIN_DTMF_DURATION, trigger dtmf emulation.
AST-362
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277250 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277182 | pabelanger | 2010-07-16 13:10:36 -0400 (Fri, 16 Jul 2010) | 8 lines
Total analysis time error with SIP and silence suppression
When using app_amd with SIP providers that have silence
suppression on, the iTotalTime count increases exponentially.
(closes issue #17656)
Reported by: juls
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Found a unused bag of curly brackets under my table. I always wondered where
they had gone. They where indeed needed in chan_sip.c
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
sip.conf configuration for the channel and for devices.
The Max-Forwards header is used to prevent loops in a SIP network. Each intermediary,
like SIP proxys and SBCs, decrement this counter and detects when it reaches zero,
at which point the SIP request is nicely killed in a SIP-friendly way.
Review: https://reviewboard.asterisk.org/r/778/
Thanks to dvossel for the review and good advice.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Related to changes from 276571, I was accidentally testing with a port set in
my configuration causing me to miss this. Also moved the TCP handling as well
to occur before build_peer is called.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
MWI updates were not being sent if no messages were found in the event cache.
This was corrected since a phone may need to clear its MWI status configured
previously from another mailbox.
Upon module or sip reload, MWI updates could not be sent due to the sipsock
socket not being set early enough in reload_config. The code handling the
descriptor assignment and such has simply been moved before the call to
build_peer.
Issuing a sip reload cleared the IP address of the peer, but skipped checking
the database for registration information. The database is now checked both
for sip reload and actually reloading the module.
If a transmission occurs before the do_monitor thread has started, do not
attempt to send a signal to it.
(closes issue #17398)
Reported by: ip-rob
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276571 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_sockaddr_stringiy_fmt (which is call by all ast_sockaddr_stringify* functions)
uses thread-local storage for storing the string that it creates. In cases where
ast_sockaddr_stringify_fmt was being called twice within the same statement, the
result of one call would be overwritten by the result of the other call. This
usually was happening in printf-like statements and was resulting in the same
stringified addressed being printed twice instead of two separate addresses.
I have fixed this by using ast_strdupa on the result of stringify functions if
they are used twice within the same statement. As far as I could tell, there were
no instances where a pointer to the result of such a call were saved anywhere, so
this is the only situation I could see where this error could occur.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Jean Galarneau
Mark Michelson
Jeff Peeler
Tilghman Lesher
Russell Bryant
Bradley Latus
Tim Ringenbach
Matthew Nicholson
Richard Mudgett
Paul Belanger
Sean Bright
Eliel C. Sardanons
Olle Johansson