mirror of git://git.sysmocom.de/ofono
doc: description of Telit LE910V2 network setup
NCM network interface on LE910V2 modem needs to be configured in a specific way after connection is established.
This commit is contained in:
parent
f4518701e9
commit
fe24e9a61e
|
@ -17,3 +17,30 @@ GPS:
|
||||||
After setting the configuration, a power cycle is required.
|
After setting the configuration, a power cycle is required.
|
||||||
Port Configiuration #8 is available since firmware 12.00.004. Firmware version
|
Port Configiuration #8 is available since firmware 12.00.004. Firmware version
|
||||||
can be checked using 'AT+CGMR'.
|
can be checked using 'AT+CGMR'.
|
||||||
|
|
||||||
|
LE910 V2
|
||||||
|
========
|
||||||
|
|
||||||
|
Default USB composition of LE910V2 uses PID 0x36 (AT#PORTCFG=0)
|
||||||
|
and consists of 6 serial ports (CDC-ACM standard, /dev/ttyACMx)
|
||||||
|
and 1 network adapter using CDC-NCM standard (wwanx or usbx).
|
||||||
|
|
||||||
|
NCM interface configuration follows Telit documentation
|
||||||
|
(both documents available on Telit Download Zone - registration required)
|
||||||
|
"GE/HE/UE910, UL865, LE910 V2 Linux USB Driver - User Guide r0"
|
||||||
|
(document 1VV0301255 Rev.0 - 2016-01-22)
|
||||||
|
and "Telit LE910-V2 NCM SETUP r3"
|
||||||
|
(document 1VV0301246 Rev.3 - 2016-11-29).
|
||||||
|
|
||||||
|
After context is setup, NCM mode activated and PDP context activated
|
||||||
|
connection configuration can be read using
|
||||||
|
AT+CGPADDR=context_id and AT+CGCONTRDP=context_id commands.
|
||||||
|
This is done automatically and results available via
|
||||||
|
org.ofono.ConnectionContext.GetProperties DBus method.
|
||||||
|
|
||||||
|
Then Linux network interface needs to be configured:
|
||||||
|
ifconfig <Interface> <Address> netmask <Netmask> up
|
||||||
|
route add default gw <Gateway>
|
||||||
|
arp -s <Gateway> 11:22:33:44:55:66
|
||||||
|
|
||||||
|
Only after these steps network interface is usable.
|
||||||
|
|
Loading…
Reference in New Issue