The driver vtables are read-only structures. This patch declares them as
'const' allowing the compiler to (optionally) put them in the RELRO
section. RELRO pages may be marked as read-only by the linker after
the relocations have been done ensuring that they aren't inadvertently
or maliciously altered at runtime.
Added the explicit support for auth NONE.
It needs to be added in all drivers/*/gprs-context.c atoms.
This method is already supported by all atoms that support
authentication (ie, all but Sierra' swmodem driver).
The behavior is left unchanged in case of inconsistent parameters:
if username is empty, then fallback to auth NONE.
The AT command reference for Quectel M95 specifies that remaining SIM
pin retires can be queried using AT+QTRPIN, which responds with one
count for each pin-type:
+QTRPIN: 3,3,10,10
After entering the PIN code, enable an extra AT+CPIN? for the M95
vendor.
When ofono dies while connected using PPP, modem AT channel is not put
back to command mode (tested with HUAWEI modems E3372 and MS2372).
If ofono is restarted, it won't be able to connect as it gets no answer
to AT commands on this AT channel.
This patch adds a quirk to immediately send escape sequence on modem
channel when gprs-context atom is removed.
It seems that the function at_pin_send_puk should have been changed
along with at_pin_send, because it's also refering to the
at_pin_send_cb callback
See this commit : ba9f126716
On the SIMCom SIM7100E, setting AT+COLP=1 causes there to be no
response at all from "ATD...;" commands until the call is answered.
The results in oFono stalling rather than creating a new VoiceCall
object.
We fix this by adding SIMCOM to the list of vendors for whom we set
AT+COLP=0 rather than AT+COLP=1.
QMI_UIM_GET_CARD_STATUS is retried in more error cases
when trying to get password type.
In case of failure, driver report an error instead of
OFONO_SIM_PASSWORD_INVALID. This avoids a crash.
Use right slot and application to get card status, PIN status and PIN
retries. Without this patch, SIMs where selected application and slot
numbers are different are not detected.
The way things are currently coded, the gobi plugin calls
qmi_device_discover and does nothing else until it succeeds. As such,
we can safely assume that the version_list is set up when we go to
create a service.
The only thing this output parameter is being used for now is for
getting the transaction ID. Return the TID directly from
__submit_requesta and drop the 'head' parameter altogether.
The only way request_alloc can fail is if one of the memory allocation
routines fail to allocate memory. However, Linux memory allocation
doesn't really fail in this manner; memory can be overcommited and the
out-of-memory reaper will take care of re-establishing the balance when
excess memory is actually accessed.
Given this, request_alloc will never return anything other than success
and the failure paths will never be exercised.
The service and control requests differ slightly in their headers, but
this difference is minor enough that we can handle it directly in the
request submission routine. This patch unifies the header setup for the
two request types.
After setting up the request structure, qmi_service_send makes no
further use of the 'param' and 'service' fields of the service_send_data
structure. This patch removes those fields and frees 'param'
immediately after the request has been allocated and the parameter data
thereby copied into the send buffer.
==2870== Conditional jump or move depends on uninitialised value(s)
==2870== at 0x4C2ED31: __memcmp_sse4_1 (vg_replace_strmem.c:972)
==2870== by 0x4F451A: sim_pin_retries_query_cb (sim.c:462)
==2870== by 0x459BDD: query_pin_retries_cb (sim.c:544)
==2870== by 0x45544A: service_send_callback (qmi.c:2143)
==2870== by 0x452D00: handle_packet (qmi.c:815)
==2870== by 0x452E85: received_data (qmi.c:863)
==2870== by 0x508DB6C: g_main_context_dispatch (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4200.1)
==2870== by 0x508DF47: ??? (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4200.1)
==2870== by 0x508E271: g_main_loop_run (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4200.1)
==2870== by 0x4C680B: main (main.c:256)
==2870== Uninitialised value was created by a stack allocation
==2870== at 0x459B1A: query_pin_retries_cb (sim.c:531)
==2870==
==2870== Conditional jump or move depends on uninitialised value(s)
==2870== at 0x4F451D: sim_pin_retries_query_cb (sim.c:462)
==2870== by 0x459BDD: query_pin_retries_cb (sim.c:544)
==2870== by 0x45544A: service_send_callback (qmi.c:2143)
==2870== by 0x452D00: handle_packet (qmi.c:815)
==2870== by 0x452E85: received_data (qmi.c:863)
==2870== by 0x508DB6C: g_main_context_dispatch (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4200.1)
==2870== by 0x508DF47: ??? (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4200.1)
==2870== by 0x508E271: g_main_loop_run (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4200.1)
==2870== by 0x4C680B: main (main.c:256)
==2870== Uninitialised value was created by a stack allocation
==2870== at 0x459B1A: query_pin_retries_cb (sim.c:531)
==2870==
==2870== Conditional jump or move depends on uninitialised value(s)
==2870== at 0x4F3DFB: get_pin_retries (sim.c:278)
==2870== by 0x4F4553: sim_pin_retries_query_cb (sim.c:467)
==2870== by 0x459BDD: query_pin_retries_cb (sim.c:544)
==2870== by 0x45544A: service_send_callback (qmi.c:2143)
==2870== by 0x452D00: handle_packet (qmi.c:815)
==2870== by 0x452E85: received_data (qmi.c:863)
==2870== by 0x508DB6C: g_main_context_dispatch (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4200.1)
==2870== by 0x508DF47: ??? (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4200.1)
==2870== by 0x508E271: g_main_loop_run (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4200.1)
==2870== by 0x4C680B: main (main.c:256)
==2870== Uninitialised value was created by a stack allocation
==2870== at 0x459B1A: query_pin_retries_cb (sim.c:531)
==2870==
==2870== Conditional jump or move depends on uninitialised value(s)
==2870== at 0x4F3E65: get_pin_retries (sim.c:288)
==2870== by 0x4F4553: sim_pin_retries_query_cb (sim.c:467)
==2870== by 0x459BDD: query_pin_retries_cb (sim.c:544)
==2870== by 0x45544A: service_send_callback (qmi.c:2143)
==2870== by 0x452D00: handle_packet (qmi.c:815)
==2870== by 0x452E85: received_data (qmi.c:863)
==2870== by 0x508DB6C: g_main_context_dispatch (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4200.1)
==2870== by 0x508DF47: ??? (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4200.1)
==2870== by 0x508E271: g_main_loop_run (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.4200.1)
==2870== by 0x4C680B: main (main.c:256)
==2870== Uninitialised value was created by a stack allocation
==2870== at 0x459B1A: query_pin_retries_cb (sim.c:531)
==14399== 28 bytes in 4 blocks are definitely lost in loss record 151 of 390
==14399== at 0x4C2BBAF: malloc (vg_replace_malloc.c:299)
==14399== by 0x209065: convert_gsm_to_utf8_with_lang (util.c:651)
==14399== by 0x2091D1: convert_gsm_to_utf8 (util.c:690)
==14399== by 0x22DDA7: ussd_decode (smsutil.c:4738)
==14399== by 0x18BF71: qmi_ussd_request (ussd.c:233)
==14399== by 0x2183EA: ussd_initiate (ussd.c:614)
==14399== by 0x27B6C8: process_message (object.c:259)
==14399== by 0x27D1CD: generic_message (object.c:1070)
==14399== by 0x5170732: ??? (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.14)
==14399== by 0x5161D83: dbus_connection_dispatch (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.14)
==14399== by 0x27907C: message_dispatch (mainloop.c:72)
==14399== by 0x4E826A9: g_main_context_dispatch (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.5000.3)
==14399== 16 bytes in 8 blocks are definitely lost in loss record 132 of 390
==14399== at 0x4C2BBAF: malloc (vg_replace_malloc.c:299)
==14399== by 0x59E03D9: strndup (strndup.c:43)
==14399== by 0x18277E: qmi_result_get_string (qmi.c:1794)
==14399== by 0x184221: get_ids_cb (devinfo.c:129)
==14399== by 0x18353B: service_send_callback (qmi.c:2286)
==14399== by 0x18093C: handle_packet (qmi.c:831)
==14399== by 0x180ADD: received_data (qmi.c:880)
==14399== by 0x4E826A9: g_main_context_dispatch (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.5000.3)
==14399== by 0x4E82A5F: ??? (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.5000.3)
==14399== by 0x4E82D81: g_main_loop_run (in /lib/x86_64-linux-gnu/libglib-2.0.so.0.5000.3)
==14399== by 0x201900: main (main.c:306)
When an LTE modem registers with the network, a default bearer is
automatically established. The APN used for this bearer is taken from
whatever default settings the modem has.
The LTE atom takes cares of setting up the default context/profile with
the APN to use. From there, a default bearer will be established when
the modem registers with the network. This results in a call to 'Get
LTE Attach Parameters' which tells us what APN the gateway negotiated
with us.
If we can't get the APN, we do what the AT driver does: pretend the
bearer wasn't established. This is a reasonable fallback, currently,
because connman can't handle zero-length APN's anyway; the previous
approach of setting the APN to 'automatic' breaks connman badly when it
needs to switch between LTE and non-LTE networks.
This patch adds an LTE atom for QMI modems.
This atom sets the APN that the LTE default bearer should use when
establishing its PDP context. This APN needs to be set on the 'default'
profile so the atom queries which profile is the default and resets
it before allowing the APN to be set.
Once configured, the default profile settings are used when the
modem connects to the network; for this reason, the LTE atom needs
to be instantiated in post_sim, before the modem is set online.
Certain modems doesn't support manual registering (gobi 2000).
Translate the error code into ofono error to report a
more detailed debug error message.