7b97a8a600
doc: Tweak comment on behavior of VoiceCall.Hangup
2012-09-26 17:55:55 -05:00
ce79121d27
stkagent: Sanitize any output from the agent
2012-09-17 12:06:35 -05:00
af9951d5d0
smsutil: Fix up style issues from previous commit
2012-09-17 11:56:09 -05:00
27b63a96c3
smsutil: <CR> is not necessarily a CBS padding character
2012-09-17 11:51:11 -05:00
941257bec6
smsutil: Fix CR padding logic for 7-bit case
2012-09-17 11:48:03 -05:00
134a35f697
unit: Add test to check CBS padding character
...
This CBS unit test is used to check that the <CR> character can
be interpreted as a wanted carriage return and not necessarily
as a padding character.
2012-09-17 11:43:11 -05:00
d31eba88c7
smsutil: Fix style issues
2012-09-17 11:27:51 -05:00
94e35ff915
stk: AID shall not be displayed in certain cases
...
When the icon is marked as self explanatory, the AID should not be
displayed.
2012-09-17 11:25:15 -05:00
23cdb46419
stk: move number conversion to a utility function
...
The dialing number provided by the Setup Call proactive command
may contain pause and DTMF characters.
2012-09-17 11:24:58 -05:00
bddfb9bfc5
isimodem: Fix style issues in previous commit
2012-09-11 23:30:25 -05:00
dc2dc41bcf
isimodem: voicecall answer fix for Nemo on N9
...
Voicecall answering in Mer/Nemomobile run on Nokia N9 will fail
unless call id is passed to modem.
2012-09-11 23:29:43 -05:00
c0a4b69e7e
test: iconId value is not a printable character
2012-09-11 23:27:14 -05:00
e0e037539a
test: playtone waits for single tone playback
...
To simulate the single tone playback (avoiding the stkagent method
to return immediately), a timeout is started (5 seconds).
During this time, the user can terminate the session.
2012-09-11 23:27:14 -05:00
5fa986eaab
test: Update with RequestQuickDigit API
2012-09-11 23:27:14 -05:00
b274e74102
netreg: Remove netreg atom in case init fails
2012-09-11 23:21:48 -05:00
bb0f308223
netreg: Don't register for CIEV twice
2012-09-11 23:20:53 -05:00
edbf04cded
netreg: Add telit version for ciev notification
2012-09-11 23:16:32 -05:00
b87619a43a
netreg: Query and select supported CMER modes
2012-09-11 22:54:43 -05:00
2dac10e1cb
sms: Optimize behavior of previous commit
...
The previous commit fixed the bug, however performing a linear-search
through the entire tx-queue is quite wasteful. The current usage
pattern is to always modify the entry at the tail of the queue, so
optimize.
2012-09-11 22:33:43 -05:00
80fb1c2fac
sms: Fix to find SMS entry posted by STK
...
SMS initiated by proactive command are not exposed on D-BUS.
Therefore, there is no message associated with the entry created from
STK.
2012-09-11 22:33:43 -05:00
c950f54856
doc: Update errors for SupplementaryServices API
2012-09-11 22:33:43 -05:00
25d51ba03b
ussd: Recover idle state after a transaction error
...
The "USSD terminated by network" notification is handled to recover
the idle state in case of USSD transaction error.
2012-09-11 22:33:43 -05:00
cf211d17e3
dbus: Add Terminated error
2012-09-11 22:33:43 -05:00
f53d219726
Release 1.11
2012-09-11 16:05:26 +02:00
380a6260dc
build: Enable dundee and tools when building distribution
2012-09-11 16:03:06 +02:00
006a37cdf8
atmodem: specify class for call barring query
...
class is specified when querying the call barring status if
the class is not the default (7 - voice, data and fax)
2012-09-05 15:04:18 -05:00
0ee9b5af78
call-barring: SS query is made with given cls
...
The default class is applied in the query form when no class is
specified in the SS code.
2012-09-05 15:03:38 -05:00
1bb7222d83
call-forwarding: SS query is made with given cls
...
GCF test cases 31.2.1.6.1/2 are asking to make a query according a
specific class. The default class is applied in the query form when
no class is specified in the SS code.
2012-09-05 15:00:14 -05:00
20138aed75
voicecall: Accept long phone number format for STK
2012-09-05 14:25:57 -05:00
b7e92a714b
doc: Add a few BT-related clarifications
...
The 'Name' and 'Serial' property take on slightly different meanings in
the case of Bluetooth devices (e.g. HFP). Update the documentation to
reflect that.
2012-09-04 22:03:14 -05:00
ef7a4bc3a7
gatchat: Print error message if opening tun failes
...
This is a very common mistake. Let's help the users to
configure their system correctly.
2012-08-30 17:06:09 -05:00
50d6f2c607
stk: Fix comment style
2012-08-30 17:01:36 -05:00
0a9a566065
stk: Ask for immediate digit response as required
...
This is done by using the stk_agent_request_quick_digit function
introduced in the previous commit.
2012-08-30 16:55:36 -05:00
e5f2701e50
stkagent: Add stk_agent_get_quick_digit
...
This function calls the newly added RequestQuickDigit method on the
StkAgent interface.
2012-08-30 16:54:54 -05:00
a4870c760e
doc: Add RequestQuickDigit method to StkAgent
...
Add new STK Agent API to get digit response on single key press
2012-08-30 16:50:42 -05:00
3ac780fee7
stk: Check if an agent is registered when UI is required
...
In case of unsolicited proactive command, we could have a crash
when no agent was registered.
2012-08-30 16:47:20 -05:00
ec6269e59b
stk: Display action information while sending USSD
2012-08-30 16:36:49 -05:00
03c4ccfd59
telit: enable extended sim status notification
...
Use AT#QSS=2 instead of AT#QSS=1 to get an URC when the SIM is not only
inserted but also when PIN is unlocked and when SMS + phonebook are
ready to be used.
Disable sim state notification in telit_enable() so that we sure get a
notification when we enable it later again. This way we don't have to
query the state the first time. Without this the Telit modem does not
always send an URC when AT#QSS=2 is sent.
Remove sim_inserted_source and sim_inserted_timeout_cb which are not
needed anymore as a consequence.
By the way the 1 second timeout was an ugly hack.
Don't query current SIM status in cfun_enable_cb() as the SIM is
disabled due to prior AT+CFUN=4.
Register '#QSS:' before enabling sim state notifications.
Remove telit_qss_cb() which was used as a callback for querying the
current SIM status.
Move sms atom creation into switch_sim_state_status() and add creation
of phonebook atom. These are created when QSS: 3 is received.
2012-08-30 09:45:27 -05:00
f94d112d2c
telit: Avoid resetting the SIM
...
Avoid a reset when switching between online and offline (airplane)
mode in telit_set_online(). +CFUN accepts a second parameter (0), which
disables a reset: AT+CFUN=x,0.
2012-08-30 09:45:27 -05:00
c1cea66a5e
gdbus: Fix compilation error if macro "error" is defined
...
The variable "signature" used in error is not defined and "args" is now
a struct instead of a string.
2012-08-27 17:28:42 -07:00
90c7bdfc8d
sim: return from CPIN when SIM unlocked for telit
...
Only return from CPIN when the modem informs that the SIM is ready
2012-08-22 18:44:18 -05:00
c7b359ae98
call-settings: Improve error reporting
...
Report error based on the error reported by the driver.
2012-08-22 18:18:05 -05:00
2638408135
call-barring: Improve error reporting
...
Report error based on the error reported by the driver.
2012-08-22 18:17:35 -05:00
666da0ea53
call-forwarding: improve error reporting
...
Report error based on the error reported by the driver.
2012-08-22 18:16:15 -05:00
92cb2fd045
telit: disable auto attach procedures with AUTOATT
2012-08-21 14:34:31 -05:00
c7e123530b
telit: Fix warning
...
plugins/telit.c: In function ‘rsen_disable_cb’:
plugins/telit.c:446:21: error: unused variable ‘data’
2012-08-20 08:10:27 -05:00
0d724c7a34
telit: add additional port for data connection
...
Use MDM port for data service and AUX for the AT chat.
Disable DCD so that the modem does not hangup after a data connection.
2012-08-20 08:09:53 -05:00
71cf14d5b1
udevng: rename aux port from Data to Aux for telit
...
Telit software user guide says:
USB AUX doesn't support any flow control method. Therefore, this port
isn't suitable for DATA service port.
We recommend this port should be used only for AT command and URC
processing.
2012-08-20 08:08:25 -05:00
4c562fb401
dundee: Add missing SetProperty documenation
2012-08-17 14:59:50 +02:00
e0b793af8a
dundee: disconnect bluetooth link in case dial fails
...
If the ATD*99# dial fails for some reason, NO CARRIER, for example, we
need to disconnect the bluetooth link and do further clean up on
disconnect_callback().
2012-08-17 14:59:50 +02:00
Denis Kenzior
Philippe Nunes
Guillaume Zajac
Jarko Poutiainen
Christopher Vogl
Marcel Holtmann
Daniel Wagner
Jaganath Kanakkassery
Gustavo Padovan