forked from acouzens/open5gs
27 KiB
27 KiB
| title | head_inline |
|---|---|
| Now in the Github Issue | <style> .blue { color: blue; } </style> |
Test failed (e.g. meson test)
Sometimes you may get a message like the one below due to a problem with the freeDiameter library.
$ meson test
...
5/8 open5gs:epc / simple OK 7.69 s
--- command ---
08:06:23 /home/parallels/open5gs/build/tests/epc/simple
--- stdout ---
s1setup-test : SUCCESS
attach-test : SUCCESS
volte-test : SUCCESS
handover-test : SUCCESS
crash-test : SUCCESS
All tests passed.
-------
6/8 open5gs:system / mnc3 FAIL 12.80 s (exit status 1)
--- command ---
08:06:31 /home/parallels/open5gs/build/tests/mnc3/mnc3
--- stdout ---
mnc3-test : ERROR: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:112 ROUTING ERROR 'No remaining suitable candidate to route the message to' for: (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 'Credit-Control-Request' (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 Version: 0x01 (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 Length: 20 (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 Flags: 0xC0 (RP--) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 Command Code: 272 (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 ApplicationId: 16777238 (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 Hop-by-Hop Identifier: 0x00000000 (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 End-to-End Identifier: 0x2875502B (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 {internal data}: src:(nil)(0) rwb:(nil) rt:0 cb:0x564527642502,(nil)(0x7f71a86df418) qry:(nil) asso:0 sess:0x7f7158001140 (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Session-Id'(263) l=8 f=-M val="pgw.localdomain;1585209991;1;app_gx" (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Origin-Host'(264) l=8 f=-M val="pgw.localdomain" (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Origin-Realm'(296) l=8 f=-M val="localdomain" (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Destination-Realm'(283) l=8 f=-M val="localdomain" (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Auth-Application-Id'(258) l=12 f=-M val=16777238 (0x1000016) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'CC-Request-Type'(416) l=12 f=-M val='INITIAL_REQUEST' (1 (0x1)) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'CC-Request-Number'(415) l=12 f=-M val=0 (0x0) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Subscription-Id'(443) l=8 f=-M val=(grouped) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Subscription-Id-Type'(450) l=12 f=-M val='END_USER_IMSI' (1 (0x1)) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Subscription-Id-Data'(444) l=8 f=-M val="310014987654004" (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Supported-Features'(628) vend='3GPP'(10415) l=12 f=V- val=(grouped) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Feature-List-ID'(629) vend='3GPP'(10415) l=16 f=V- val=1 (0x1) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Feature-List'(630) vend='3GPP'(10415) l=16 f=V- val=11 (0xb) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Network-Request-Support'(1024) vend='3GPP'(10415) l=16 f=VM val=1 (0x1) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Framed-IP-Address'(8) l=8 f=-M val=<0A 2D 00 02> (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'IP-CAN-Type'(1027) vend='3GPP'(10415) l=16 f=VM val=5 (0x5) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'RAT-Type'(1032) vend='3GPP'(10415) l=16 f=V- val=1004 (0x3ec) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'QoS-Information'(1016) vend='3GPP'(10415) l=12 f=VM val=(grouped) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'APN-Aggregate-Max-Bitrate-UL'(1041) vend='3GPP'(10415) l=16 f=V- val=1024000000 (0x3d090000) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'APN-Aggregate-Max-Bitrate-DL'(1040) vend='3GPP'(10415) l=16 f=V- val=1024000000 (0x3d090000) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Default-EPS-Bearer-QoS'(1049) vend='3GPP'(10415) l=12 f=V- val=(grouped) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'QoS-Class-Identifier'(1028) vend='3GPP'(10415) l=16 f=VM val=9 (0x9) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Allocation-Retention-Priority'(1034) vend='3GPP'(10415) l=12 f=V- val=(grouped) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Priority-Level'(1046) vend='3GPP'(10415) l=16 f=V- val=15 (0xf) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Pre-emption-Capability'(1047) vend='3GPP'(10415) l=16 f=V- val=1 (0x1) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Pre-emption-Vulnerability'(1048) vend='3GPP'(10415) l=16 f=V- val=0 (0x0) (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: '3GPP-User-Location-Info'(22) vend='3GPP'(10415) l=12 f=VM val=<82 13 00 41 00 33 13 00 41 08 D0 1B 78> (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: '3GPP-MS-TimeZone'(23) vend='3GPP'(10415) l=12 f=VM val=<23 00> (../lib/diameter/common/init.c:116)
: ../subprojects/freeDiameter/extensions/dbg_msg_dumps/dbg_msg_dumps.c:113 AVP: 'Called-Station-Id'(30) l=8 f=-M val=<73 74 61 72 65 6E 74 2E 63 6F 6D> (../lib/diameter/common/init.c:116)
: no_CC-Request-Number (../src/pgw/pgw-fd-path.c:505)
/home/parallels/open5gs/build/src/pgw/../../lib/core/libogscore.so.1(ogs_abort+0x2e)[0x7f71abdbdbf8]
/home/parallels/open5gs/build/src/pgw/open5gs-pgwd(+0x1cb8f)[0x564527642b8f]
/home/parallels/open5gs/build/src/pgw/../../subprojects/freeDiameter/libfdcore/libfdcore.so.7(+0x492d7)[0x7f71ab7702d7]
/home/parallels/open5gs/build/src/pgw/../../subprojects/freeDiameter/libfdcore/libfdcore.so.7(+0x4cb63)[0x7f71ab773b63]
/home/parallels/open5gs/build/src/pgw/../../subprojects/freeDiameter/libfdcore/libfdcore.so.7(+0x4ccef)[0x7f71ab773cef]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x76db)[0x7f71aae686db]
/lib/x86_64-linux-gnu/libc.so.6(clone+0x3f)[0x7f71aab9188f]
03/26 16:06:43.674ERROR: GTP Timeout : IMSI[310014987654004] Message-Type[32] (../src/sgw/sgw-s11-handler.c:39)
FAILED 1 of 1
Failed Tests Total Fail Failed %
===================================================
mnc3-test 1 1 100.00%
--- stderr ---
03/26 16:06:43.681: [ERROR: GTP Timeout : IMSI[310014987654004] Message-Type[32] (../src/mme/mme-gtp-path.c:110)
Line 202: Condition is false, but expected true
-------
7/8 open5gs:system / volte FAIL 10.57 s (killed by signal 6 SIGABRT)
...
I cannot solve the problem exactly at this point. {: .blue}
Remove all subscriber information using MongoDB Client
$ mongo
> use open5gs
switched to db open5gs
> db.subscribers.find() ### Check the test subscriber
> db.subscribers.drop() ### Remove all subscriber
> db.subscribers.find() ### Check that all subscribers are empty
Kill all processes.
$ ps -ef | grep open5gs
$ sudo pkill -9 open5gs-mmed
$ sudo pkill -9 open5gs-sgwcd
$ sudo pkill -9 open5gs-smfd
$ sudo pkill -9 open5gs-amfd
$ sudo pkill -9 open5gs-sgwud
$ sudo pkill -9 open5gs-upfd
$ sudo pkill -9 open5gs-hssd
$ sudo pkill -9 open5gs-pcrfd
$ sudo pkill -9 open5gs-nrfd
$ sudo pkill -9 open5gs-ausfd
$ sudo pkill -9 open5gs-udmd
$ sudo pkill -9 open5gs-udrd
Run meson test again
$ meson test
ninja: Entering directory `/Users/acetcom/Documents/git/open5gs/build'
ninja: no work to do.
1/8 open5gs:unit / core OK 6.93 s
2/8 open5gs:unit / crypt OK 0.08 s
3/8 open5gs:system / sctp OK 1.09 s
4/8 open5gs:unit / unit OK 0.04 s
5/8 open5gs:epc / simple OK 5.07 s
6/8 open5gs:epc / mnc3 OK 1.18 s
7/8 open5gs:epc / volte OK 2.99 s
8/8 open5gs:epc / csfb OK 6.53 s
Ok: 8
Expected Fail: 0
Fail: 0
Unexpected Pass: 0
Skipped: 0
Timeout: 0
Full log written to /Users/acetcom/Documents/git/open5gs/build/meson-logs/testlog.txt
Note: If your test result more than once is same as above, there should be no problem with code you modified. {: .notice--danger}
Is it possible to setup IP/NAT table along with Docker?
Enable IP Forward.
$ sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
The following is the default docker IP/NAT table.
$ sudo iptables-save
# Generated by iptables-save v1.6.1 on Sat Jun 1 23:43:50 2019
*nat
:PREROUTING ACCEPT [74:4820]
:INPUT ACCEPT [4:208]
:OUTPUT ACCEPT [49:3659]
:POSTROUTING ACCEPT [49:3659]
:DOCKER - [0:0]
-A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER
-A OUTPUT ! -d 127.0.0.0/8 -m addrtype --dst-type LOCAL -j DOCKER
-A POSTROUTING -s 172.17.0.0/16 ! -o docker0 -j MASQUERADE
-A DOCKER -i docker0 -j RETURN
COMMIT
# Completed on Sat Jun 1 23:43:50 2019
# Generated by iptables-save v1.6.1 on Sat Jun 1 23:43:50 2019
*filter
:INPUT ACCEPT [651:514108]
:FORWARD DROP [70:4612]
:OUTPUT ACCEPT [590:63846]
:DOCKER - [0:0]
:DOCKER-ISOLATION-STAGE-1 - [0:0]
:DOCKER-ISOLATION-STAGE-2 - [0:0]
:DOCKER-USER - [0:0]
-A FORWARD -j DOCKER-USER
-A FORWARD -j DOCKER-ISOLATION-STAGE-1
-A FORWARD -o docker0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -o docker0 -j DOCKER
-A FORWARD -i docker0 ! -o docker0 -j ACCEPT
-A FORWARD -i docker0 -o docker0 -j ACCEPT
-A DOCKER-ISOLATION-STAGE-1 -i docker0 ! -o docker0 -j DOCKER-ISOLATION-STAGE-2
-A DOCKER-ISOLATION-STAGE-1 -j RETURN
-A DOCKER-ISOLATION-STAGE-2 -o docker0 -j DROP
-A DOCKER-ISOLATION-STAGE-2 -j RETURN
-A DOCKER-USER -j RETURN
COMMIT
# Completed on Sat Jun 1 23:43:50 2019
Create newtables file as below.
$ diff -u oldtables newtables
--- oldtables 2019-06-01 23:43:50.354974226 +0900
+++ newtables 2019-06-01 23:44:16.110931684 +0900
@@ -8,6 +8,7 @@
-A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER
-A OUTPUT ! -d 127.0.0.0/8 -m addrtype --dst-type LOCAL -j DOCKER
-A POSTROUTING -s 172.17.0.0/16 ! -o docker0 -j MASQUERADE
+-A POSTROUTING -s 10.45.0.0/16 ! -o ogstun -j MASQUERADE
-A DOCKER -i docker0 -j RETURN
COMMIT
# Completed on Sat Jun 1 23:43:50 2019
@@ -26,6 +27,10 @@
-A FORWARD -o docker0 -j DOCKER
-A FORWARD -i docker0 ! -o docker0 -j ACCEPT
-A FORWARD -i docker0 -o docker0 -j ACCEPT
+-A FORWARD -o ogstun -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
+-A FORWARD -o ogstun -j DOCKER
+-A FORWARD -i ogstun ! -o ogstun -j ACCEPT
+-A FORWARD -i ogstun -o ogstun -j ACCEPT
-A DOCKER-ISOLATION-STAGE-1 -i docker0 ! -o docker0 -j DOCKER-ISOLATION-STAGE-2
-A DOCKER-ISOLATION-STAGE-1 -j RETURN
-A DOCKER-ISOLATION-STAGE-2 -o docker0 -j DROP
And then, apply newtables as below.
$ sudo iptables-restore < newtables
The above operation is the same as described in the following manuals.
### Check IP Tables
$ sudo iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
### Check NAT Tables
$ sudo iptables -L -t nat
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
### Enable IPv4 Forwarding
$ sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
### Add NAT Rule
$ sudo iptables -t nat -A POSTROUTING -s 10.45.0.0/16 ! -o ogstun -j MASQUERADE
How to use a different APN for each PGW
By default, MME selects the PGW as the first PGW node. To use a different APN for each PGW, specify gtpc.apn as the APN name. If the HSS uses WebUI to set the PGW IP for each UE, you can use a specific PGW node for each UE.
See the following example.
### For reference, see `pgw.yaml`
#------------------------ MME --------------------------
#
# o Two PGW are defined. 127.0.0.3:2123 is used.
# [fe80::3%lo]:2123 is ignored.
# gtpc:
# - addr: 127.0.0.3
# - addr: fe80::3%lo
#
# o One PGW is defined. if prefer_ipv4 is not true,
# [fe80::3%lo] is selected.
# gtpc:
# - addr:
# - 127.0.0.3
# - fe80::3%lo
#
# o Two PGW are defined with a different APN.
# - Note that if PGW IP for UE is configured in HSS,
# the following configurion for this UE is ignored.
# gtpc:
# - addr: 127.0.0.3
# apn: internet
# - addr: 127.0.0.5
# apn: volte
#
# o If APN is omitted, the default APN uses the first PGW node.
# gtpc:
# - addr: 127.0.0.3
# - addr: 127.0.0.5
# apn: volte
#
The IP address of the UE can also use a different UE pool depending on the APN.
### For reference, see `pgw.yaml`
#
# <UE Pool>
#
# o IPv4 Pool
# $ sudo ip addr add 10.45.0.1/16 dev ogstun
#
# ue_pool:
# addr: 10.45.0.1/16
#
# o IPv4/IPv6 Pool
# $ sudo ip addr add 10.45.0.1/16 dev ogstun
# $ sudo ip addr add cafe:1::1/64 dev ogstun
#
# ue_pool:
# - addr: 10.45.0.1/16
# - addr: cafe:1::1/64
#
#
# o Specific APN(e.g 'volte') uses 10.46.0.1/16, cafe:2::1/64
# All other APNs use 10.45.0.1/16, cafe:1::1/64
# $ sudo ip addr add 10.45.0.1/16 dev ogstun
# $ sudo ip addr add 10.46.0.1/16 dev ogstun
# $ sudo ip addr add cafe:1::1/64 dev ogstun
# $ sudo ip addr add cafe:2::1/64 dev ogstun
#
# ue_pool:
# - addr: 10.45.0.1/16
# - addr: cafe:1::1/64
# - addr: 10.46.0.1/16
# apn: volte
# - addr: cafe:2::1/64
# apn: volte
#
# o Multiple Devices (default: ogstun)
# $ sudo ip addr add 10.45.0.1/16 dev ogstun
# $ sudo ip addr add cafe:1::1/64 dev ogstun2
# $ sudo ip addr add 10.46.0.1/16 dev ogstun3
# $ sudo ip addr add cafe:2::1/64 dev ogstun3
#
# ue_pool:
# - addr: 10.45.0.1/16
# - addr: cafe:1::1/64
# dev: ogstun2
# - addr: 10.46.0.1/16
# apn: volte
# dev: ogstun3
# - addr: cafe:2::1/64
# apn: volte
# dev: ogstun3
#
Failing to run ./open5gs-mmed
You might be getting the following error after running ./open5gs-mmed.
$ ./build/src/mme/open5gs-mmed
10/27 16:45:41.912: [app] FATAL: cannot open file `/Users/acetcom/Documents/git/open5gs/install/etc/open5gs/mme.yaml` (../lib/app/ogs-config.c:67)
10/27 16:45:41.912: [app] FATAL: Open5GS initialization failed. Aborted (../src/main.c:211)
You should perform the installation process.
$ ninja -C build install
How to connect MongoDB server
If you do not start MongoDB, you will get the following error:
$ ./install/bin/open5gs-hssd
Open5GS daemon v1.0.0
10/27 16:45:00.371: [app] INFO: Configuration: '/Users/acetcom/Documents/git/open5gs/install/etc/open5gs/hss.yaml' (../src/main.c:54)
10/27 16:45:00.372: [app] INFO: File Logging: '/Users/acetcom/Documents/git/open5gs/install/var/log/open5gs/hss.log' (../src/main.c:57)
10/27 16:45:00.377: [dbi] ERROR: Failed to connect to server [mongodb://localhost/open5gs] (../lib/dbi/ogs-mongoc.c:91)
10/27 16:45:00.377: [app] ERROR: Failed to intialize HSS (../src/hss/app-init.c:28)
You can start MongoDB using systemctl.
$ sudo systemctl start mongodb
I have some error when running ./build/test/attach/attach
Did you see the following error after executing ./build/test/attach/attach?
$ ./build/test/epc/simple
s1setup_test : SUCCESS
attach_test : -Line 134: Condition is false, but expected true
\04/09 15:49:09.285: [esm] FATAL: esm_handle_pdn_connectivity_request: Assertion `SECURITY_CONTEXT_IS_VALID(mme_ue)' failed. (esm_handler.c:29)
/home/acetcom/Documents/git/open5gs/open5gs/lib/ogslib/src/core/.libs/libogscore-1.0.so.0(ogs_abort+0x2b)[0x7f608518271b]
/home/acetcom/Documents/git/open5gs/open5gs/test/.libs/simple(+0x92121)[0x55dc9e274121]
/home/acetcom/Documents/git/open5gs/open5gs/test/.libs/simple(+0x4f5b9)[0x55dc9e2315b9]
Remove all subscriber information using MongoDB Client
$ mongo
> db.subscribers.find() ### Check the test subscriber
> db.subscribers.drop() ### Remove all subscriber
> db.subscribers.find() ### Check that all subscribers are empty
Kill all processes.
$ ps -ef | grep simple
$ ps -ef | grep open5gs
$ sudo pkill -9 simple
$ sudo pkill -9 open5gs-mmed ...
Execute ./build/test/epc/simple
$ ./build/test/epc/simple
My gNB/eNB does not support IPv6.
Your eNodeB don't have to support IPv6.
If the sgwu.gtpu configuration does not have an IPv6 address, the gNB/eNB can use IPv4 to connect to the MME and SGW-U. If the sgwu.gtpu setting has an IPv6 address, you can disable the IPv6 address as shown below.
parameter:
no_ipv6: true
Note: This parameter no_ipv6 is only applied to NFs such as AMF, MME, SGW-C, and so on. The parameter no_ipv6 does not affect to UE. So, IPv6-enabled UE can connect to Open5GS LTE network.
{: .notice--warning}
Unable to add new user by WebUI
It might be a CSRF token mismatch error. Please, delete corresponding cookies, cache, session data etc.
Change Domain from localdomain to anything else
You should configure the domain name on your computer. Otherwise, freeDiameter raise an error.
How many of UEs can Open5GS support?
See the [lib/core/ogs-3gpp-types.h](https://github.com/{{ site.github_username }}/open5gs/blob/master/lib/core/ogs-3gpp-types.h).
#define MAX_NUM_OF_ENB 128
#define MAX_NUM_OF_UE 128
#define MAX_NUM_OF_SESS 4
#define MAX_NUM_OF_BEARER 4
#define MAX_NUM_OF_TUNNEL 3 /* Num of Tunnel per Bearer */
#define MAX_NUM_OF_PF 16 /* Num of Packet Filter per Bearer */
#define MAX_POOL_OF_UE (MAX_NUM_OF_ENB * MAX_NUM_OF_UE)
#define MAX_POOL_OF_SESS (MAX_POOL_OF_UE * MAX_NUM_OF_SESS)
#define MAX_POOL_OF_BEARER (MAX_POOL_OF_SESS * MAX_NUM_OF_BEARER)
#define MAX_POOL_OF_TUNNEL (MAX_POOL_OF_BEARER * MAX_NUM_OF_TUNNEL)
#define MAX_POOL_OF_PF (MAX_POOL_OF_BEARER * MAX_NUM_OF_PF)
#define MAX_POOL_OF_DIAMETER_SESS (MAX_POOL_OF_UE * MAX_NUM_OF_SESS)
Currently, the number of UE is limited to 128*128.
What is the Default Configuration?
- Network
* MongoDB : 127.0.0.1
* MME : 127.0.0.2
* SGW-C : 127.0.0.3
* SMF : 127.0.0.4
* AMF : 127.0.0.5
* SGW-U : 127.0.0.6
* UPF : 127.0.0.7
* HSS : 127.0.0.8
* PCRF : 127.0.0.9
* NRF : 127.0.0.10
* AUSF : 127.0.0.11
* UDM : 127.0.0.12
* UDR : 127.0.0.13
- AMF_ID, TAC and S_NSSAI
* AMF_ID
PLMN ID - MNC: 901, MCC: 70
Region : 2
Set : 1
* TAI
PLMN ID - MNC: 901, MCC: 70
TAC : 1
* S_NSSASI
SST : 1
- GUMMEI, PLMN and TAC
* GUMMEI
PLMN ID - MNC: 901, MCC: 70
MME Group : 2
MME Code : 1
* TAI
PLMN ID - MNC: 901, MCC: 70
TAC : 1
- Security
* Integrity : NIA1/EIA1 - Snow 3G
* Ciphering : NEA0/EEA0 - Nothing
- UE Network
* IPv4 : 10.45.0.1/16
* IPv6 : cafe::1/64
- DNS
* IPv4
Primary : 8.8.8.8
Secondary : 8.8.4.4
* IPv6
Primary : 2001:4860:4860::8888
Secondary : 2001:4860:4860::8844
The parsing errors are caused by tab spaces in the configuration files.
YAML forbids tabs. You should use space instead of tab in Open5GS configuration file.
YAML FAQ: Why does YAML forbid tabs?
Tabs have been outlawed since they are treated differently by different editors and tools. And since indentation is so critical to proper interpretation of YAML, this issue is just too tricky to even attempt. Indeed Guido van Rossum of Python has acknowledged that allowing TABs in Python source is a headache for many people and that were he to design Python again, he would forbid them.
Cross compilation setup
By default, Open5GS is designed to support the Embedding System. To do so, we introduced pool-based memory management. Unfortunately, we have not tested Open5GS in an embedded environment. I tried to compile on the ARM architecture using Docker and run it with QEMU for your reference.
- We'll use Debian Docker Environment.
$ git clone https://github.com/open5gs/open5gs
$ cd open5gs/docker
$ DIST=debian TAG=stretch docker-compose run dev
- In Docker Container
$ sudo dpkg --add-architecture armel
$ sudo apt update
$ sudo apt install libsctp-dev:armel libyaml-dev:armel libgnutls28-dev:armel libgcrypt-dev:armel libidn11-dev:armel libssl-dev:armel libmongoc-dev:armel libbson-dev:armel
$ sudo apt install crossbuild-essential-armel
$ sudo apt install qemu
$ git clone https://github.com/acetcom/open5gs
$ cd open5gs/
$ cat << EOF > cross_file.txt
[host_machine]
system = 'linux'
cpu_family = 'x86_64'
cpu = 'x86_64'
endian = 'little'
[binaries]
c = '/usr/bin/arm-linux-gnueabi-gcc'
ar = '/usr/bin/arm-linux-gnueabi-ar'
strip = '/usr/bin/arm-linux-gnueabi-strip'
pkgconfig = '/usr/bin/arm-linux-gnueabi-pkg-config'
[properties]
needs_exe_wrapper = true
EOF
$ meson build --prefix=`pwd`/install --cross-file cross_file.txt
$ ninja -C build
$ qemu-arm ./install/bin/open5gs-sgwd
Open5GS daemon v1.0.0
10/28 06:47:36.649: [app] INFO: Configuration: '/home/acetcom/git/open5gs/install/etc/open5gs/sgw.yaml' (../src/main.c:54)
10/28 06:47:36.652: [app] INFO: File Logging: '/home/acetcom/git/open5gs/install/var/log/open5gs/sgw.log' (../src/main.c:57)
Unknown host QEMU_IFLA type: 50
Unknown host QEMU_IFLA type: 51
Unknown host QEMU_IFLA type: 40
Unknown host QEMU_IFLA type: 41
Unknown host QEMU_IFLA type: 47
Unknown host QEMU_IFLA type: 48
Unknown host QEMU_IFLA type: 43
Unknown host QEMU_IFLA type: 50
Unknown host QEMU_IFLA type: 51
Unknown host QEMU_IFLA type: 40
Unknown host QEMU_IFLA type: 41
Unknown host QEMU_IFLA type: 47
Unknown host QEMU_IFLA type: 48
Unknown host QEMU_IFLA type: 43
Unknown QEMU_IFLA_INFO_KIND tun
Unknown host QEMU_IFLA type: 50
Unknown host QEMU_IFLA type: 51
Unknown host QEMU_IFLA type: 40
Unknown host QEMU_IFLA type: 41
Unknown host QEMU_IFLA type: 47
Unknown host QEMU_IFLA type: 48
Unknown host QEMU_IFLA type: 43
10/28 06:47:36.683: [app] INFO: SGW initialize...done (../src/sgw/app-init.c:31)
10/28 06:47:36.696: [gtp] INFO: gtp_server() [127.0.0.2]:2123 (../lib/gtp/path.c:32)
10/28 06:47:36.697: [gtp] INFO: gtp_server() [172.18.0.2]:2152 (../lib/gtp/path.c:32)
^C10/28 06:47:37.324: [app] INFO: SIGINT received (../src/main.c:73)
10/28 06:47:37.325: [app] INFO: Open5GS daemon terminating... (../src/main.c:229)
10/28 06:47:37.337: [app] INFO: SGW terminate...done (../src/sgw/app-init.c:39)
$ qemu-arm ./install/bin/open5gs-hssd
Open5GS daemon v1.0.0
10/28 06:47:39.021: [app] INFO: Configuration: '/home/acetcom/git/open5gs/install/etc/open5gs/hss.yaml' (../src/main.c:54)
10/28 06:47:39.024: [app] INFO: File Logging: '/home/acetcom/git/open5gs/install/var/log/open5gs/hss.log' (../src/main.c:57)
qemu: Unsupported syscall: 345
qemu: Unsupported syscall: 345
qemu: Unsupported syscall: 345
qemu: Unsupported syscall: 345
qemu: Unsupported syscall: 345
qemu: Unsupported syscall: 345
qemu: Unsupported syscall: 345
qemu: Unsupported syscall: 345
10/28 06:47:39.044: [dbi] INFO: MongoDB URI: 'mongodb://mongodb/open5gs' (../lib/dbi/ogs-mongoc.c:99)
getsockopt level=132 optname=0 not yet supported
10/28 06:47:41.917: [diam] ERROR: ../subprojects/freediameter/libfdcore/sctp.c:86 ERROR: in '(getsockopt(sk, IPPROTO_SCTP, 0, &rtoinfo, &sz))' : Operation not supported (../lib/diameter/common/init.c:116)
10/28 06:47:41.919: [diam] ERROR: ../subprojects/freediameter/libfdcore/sctp.c:778 ERROR: in '((fd_setsockopt_prebind(*sock)))' : Operation not supported (../lib/diameter/common/init.c:116)
10/28 06:47:41.919: [diam] ERROR: ../subprojects/freediameter/libfdcore/cnxctx.c:181 ERROR: in '(fd_sctp_create_bind_server( &cnx->cc_socket, cnx->cc_family, ep_list, port ))' : Operation not supported (../lib/diameter/common/init.c:116)
10/28 06:47:41.919: [diam] ERROR: ../subprojects/freediameter/libfdcore/server.c:355 ERROR: in '(s->conn = fd_cnx_serv_sctp(fd_g_config->cnf_port, empty_conf_ep ? ((void *)0) : &fd_g_config->cnf_endpoints))' : Transport endpoint is not connected (../lib/diameter/common/init.c:116)
10/28 06:47:41.919: [diam] ERROR: ../subprojects/freediameter/libfdcore/core.c:300 ERROR: in '((fd_servers_start()))' : Transport endpoint is not connected (../lib/diameter/common/init.c:116)
10/28 06:47:41.920: [diam] ERROR: ../lib/diameter/common/init.c:62 ERROR: in '(fd_core_start())' : Transport endpoint is not connected (../lib/diameter/common/init.c:116)
10/28 06:47:41.920: [diam] INFO: [6]: ../subprojects/freediameter/libfdcore/core.c:329 Initiating freeDiameter shutdown sequence (2) (../lib/diameter/common/init.c:127)
10/28 06:47:42.057: [hss] FATAL: hss_fd_init: Assertion `ret == 0' failed. (../src/hss/hss-fd-path.c:681)
The SCTP module is not included in the QEMU kernel. I believe that if the Linux kernel installed on your target platform contains an SCTP module, it will work normally. {: .notice--warning}