Refs #1002. Added makefile comment about how to get the toolpath variable in the 8.3 format on Windows.

git-svn-id: https://svn.code.sf.net/p/openblt/code/trunk@744 5dc33758-31d5-4daf-9ae8-b24bf3d40d73

Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_stm32f051
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_stm32f051
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_stm32f091
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_stm32f091
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_stm32g071
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_stm32g071
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_EFM32_Olimex_EM32G880F128STK_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_olimex_efm32g880
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_EFM32_Olimex_EM32G880F128STK_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_olimex_efm32g880
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_LM3S_EK_LM3S6965_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_ek_lm3s6965
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_LM3S_EK_LM3S6965_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_ek_lm3s6965
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_LM3S_EK_LM3S8962_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_ek_lm3s8962
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_LM3S_EK_LM3S8962_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_ek_lm3s8962
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_nucleo_stm32f103rb
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_nucleo_stm32f103rb
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_STM32F1_Olimex_STM32H103_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_olimex_stm32h103
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_STM32F1_Olimex_STM32H103_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_olimex_stm32h103
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_olimex_stm32p103
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_olimex_stm32p103
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_olimexino_stm32
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_olimexino_stm32
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_stm32f207
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_stm32f207
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_stm32f303
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_stm32f303
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_stm32f303
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_stm32f303
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM4_STM32F4_Olimex_STM32E407_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_olimex_stm32e407
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM4_STM32F4_Olimex_STM32E407_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_olimex_stm32e407
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_olimex_stm32p405
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_olimex_stm32p405
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_stm32l476
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_stm32l476
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_stm32f746
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_stm32f746
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_GCC/Boot/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=openblt_stm32f767
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/
 
 

Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_GCC/Prog/makefile

@@ -34,6 +34,12 @@ PROJ_NAME=demoprog_stm32f767
 #|--------------------------------------------------------------------------------------|
 #| Configure tool path                                                                  |
 #|--------------------------------------------------------------------------------------|
+# Configure the path to where the arm-none-eabi-gcc program is located. If the program
+# is available on the path, then the TOOL_PATH variable can be left empty.
+# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
+# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
+# format, open the directory in the Windows command prompt and run the following command:
+#  cmd /c for %A in ("%cd%") do @echo %~sA 
 TOOL_PATH=/opt/gcc-arm-none-eabi-8-2018-q4-major/bin/