export_netdevs will export a net device for every port. These netdev represent a port
with out traffic.
When such a device is broght down via ifconfig the port is shutdown and
vice versa. Carrier sense is working too and ethtool can be used to
control advertise, autoneg, ...
Port0 is uplink/PD port (IDC)
Port1-3 are downink/PSE ports (IDC)
Port4 is admin port (RJ45)
* we only have 8 MByte flash
* we use the hardware LEDs for switch ports 1-5
The image boots and is able to establish links on both eth0 and eth1.
However, the LED support is not yet working as expected.
The following patches unfortunately didn't hit the kernel stable
branches yet, therefore cherrypicking them for OpenWRT here:
* bridge: fix netfilter/NF_BR_LOCAL_OUT for own, locally generated queries
* bridge: multicast: enable snooping on general queries only
* bridge: multicast: add sanity check for general query destination
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Backport of r43841
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@44049 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch fixes LED definitions for the DRAGINO2 board.
1. It renames the Router/USB led to System, as it is now marked "SYS" on the board.
2. It gives control of the LAN and WAN leds and some other GPIOs to Linux.
3. It fixes the active_low property for the LAN and WAN leds.
4. It sets up WLAN, LAN and WAN leds in the UCI defaults.
5. It allows usage of the System led by the diag.sh script, so it will be used to indicate boot and failsafe status.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
Backport of r42897
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43867 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r43736
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43737 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r43624
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43683 3c298f89-4303-0410-b956-a3cf2f4a3e73
The cpu port is at 8, not 5.
Fixes#18406.
Backport of r43379.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43380 3c298f89-4303-0410-b956-a3cf2f4a3e73
(required not-distributable firmware blob - dump it by yourself from original firmware)
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43166 3c298f89-4303-0410-b956-a3cf2f4a3e73
(required not-distributable firmware blob - dump it by yourself from original firmware)
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43165 3c298f89-4303-0410-b956-a3cf2f4a3e73
(required not-distributable firmware blob - dump it by yourself from original firmware)
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43164 3c298f89-4303-0410-b956-a3cf2f4a3e73
(required not-distributable firmware blob - dump it by yourself from original firmware)
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43163 3c298f89-4303-0410-b956-a3cf2f4a3e73
MIPS: Fix rtlx build error.
CC arch/mips/kernel/rtlx.o
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘file_write’:
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:439:23: error: unused variable ‘rt’ [-Werror=unused-variable]
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘rtlx_module_init’:
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:523:3: error: implicit declaration of function ‘set_vi_handler’ [-Werror=implicit-function-declaration]
cc1: all warnings being treated as errors
Caused by 496ad9aa8ef448058e36ca7a787c61f2e63f0f54 [new helper:
file_inode(file)].
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43159 3c298f89-4303-0410-b956-a3cf2f4a3e73
(required not-distributable firmware blob - dump it by yourself from original firmware)
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43158 3c298f89-4303-0410-b956-a3cf2f4a3e73