Alexander Couzens
820cfa16a7
linux: implement regdump of phys via debugfs
...
Allow a regdump of the phy register space via debugfs.
hexdump /sys/kernel/debug/mdio_bus/ag71xx_mdio/ag71xx-mdio.1:00/regdump
2015-05-26 18:53:07 +02:00
Alexander Couzens
fe3973c6b1
ar71xx/sysmocom: rename machine id support patch
2015-05-20 12:58:54 +02:00
Alexander Couzens
5f90cba27a
ar71xx: add size depend partition generation
...
Partitions are generated depending on the size of the flash chip.
The layout on which the partition based is hardcoded into the module.
Using this new partition layout it makes possible to have 8mb and 16mb within
the same board definition.
2015-05-20 12:58:53 +02:00
Alexander Couzens
acd543359d
ar71xx/sysmocom: set art table even for 8mb devices to the last sector of 16mb
...
This is possible because the memory will be wrapped around when using
the mapped spi memory space.
2015-05-18 22:32:28 +02:00
Alexander Couzens
f79215acdd
ar71xx/sysmocom: build image for jb02v3-skw when using sysmocom profile
2015-05-13 16:56:06 +02:00
Alexander Couzens
fb426b964f
ar71xx/sysmocom: add support for jb02v3
2015-05-12 17:46:02 +02:00
Alexander Couzens
063fd0f34e
ar71xx/sysmocom: rename jb02 image to jb02v2-cb2
2015-05-12 16:37:52 +02:00
Alexander Couzens
8175affc55
linux: move net phy backport patch into the correct directory
2015-05-09 11:51:55 +02:00
Alexander Couzens
21f5cd2f8a
RFC: ag71xx_ar7240 add new switch func export_netdevs
...
export_netdevs will export a net device for every port. These netdev represent a port
with out traffic.
When such a device is broght down via ifconfig the port is shutdown and
vice versa. Carrier sense is working too and ethtool can be used to
control advertise, autoneg, ...
2015-05-09 11:39:10 +02:00
Alexander Couzens
af54c0148b
linux: add net phy backports for phy port patch
2015-05-09 11:09:49 +02:00
Alexander Couzens
745887a828
linux: backport support for thermal sensor lm75b
...
It's included in generic lm75 driver.
2015-05-07 20:49:16 +02:00
Alexander Couzens
22bd48f95c
linux: backport support for light sensor APDS9300 using iio framework
2015-05-07 20:49:06 +02:00
Alexander Couzens
607bcc2386
ar71xx/sysmocom: register i2c bus + devices
2015-05-07 20:46:33 +02:00
Alexander Couzens
1755472d2e
ar71xx/sysmocom: switch mac address of eth0 + eth1
...
The lowest mac address should assigned to the switch
2015-04-06 20:09:06 +02:00
Alexander Couzens
df9021e78b
ar71xx/sysmocom: fix default state of wlan led
...
Because of using the wlan led as diag led this led will remain on even when the wifi is off
2015-04-04 20:18:16 +02:00
Alexander Couzens
78eabd2db9
ar71xx/sysmocom/ap2: set a static ip to the local port (wan/top)
2015-04-04 18:55:09 +02:00
Alexander Couzens
89ace1cf94
ar71xx/sysmocom: set wlan led as diag led for recovery
2015-04-04 17:08:10 +02:00
Alexander Couzens
eb57ede2dd
ar71xx/sysmocom: enable sysupgrade on all boards
2015-04-04 17:08:09 +02:00
Alexander Couzens
7cfcabc7ae
ar71xx/sysmocom/sob-jb02: fix led color - both leds are red
2015-04-04 17:08:09 +02:00
Alexander Couzens
7ddeeba72a
ar71xx: ap1 + jb02: fix mac address
2015-03-17 18:32:40 +01:00
Alexander Couzens
b240f36506
ar71xx/ap1 ap2: replace default network configuration with eth0.6 = mgmt
2015-03-17 14:07:05 +01:00
Alexander Couzens
2739f09d07
ar71xx/jb02: replace default network configuration with eth0.6 = mgmt
2015-03-17 12:48:27 +01:00
Alexander Couzens
64caabe995
ar71xx/sysmocom: move local admin port out of the switch
2015-03-10 17:05:56 +01:00
Alexander Couzens
79322fd883
ar71xx/sysmocom: fix ap2 calibration data location
...
ap2 has only 8 MB SPI flash
2015-03-10 15:27:30 +01:00
Alexander Couzens
aa67259629
ar71xx/sysmocom: fix ethernet support of sysmo-ap1 & sysmo-jb02
...
wrong ethernet mac was used
2015-03-10 15:25:44 +01:00
Alexander Couzens
e25ed2fede
ar71xx/sysmocom: fix MAC address offset usage.
...
ath79_init_mac(*dest, *src, offset): The offset was misused.
Offset is added to the MAC address value.
2015-03-10 15:25:44 +01:00
Alexander Couzens
ebeadd286c
ar71xx/sysmocom: move network configuration out of _common()
...
The sysmo boards differs to much - put it into board configuration
to improve readability.
2015-03-10 15:25:44 +01:00
Harald Welte
931bb20e63
sob-ap2: Enable GPIO26 + GPIO27 as GPIO, not MDIO
2015-02-21 19:58:58 +01:00
Harald Welte
e67d0c78a6
initial support of the new sysmocom SOB-AP2 (1xPD/3xPSE)
...
Port0 is uplink/PD port (IDC)
Port1-3 are downink/PSE ports (IDC)
Port4 is admin port (RJ45)
* we only have 8 MByte flash
* we use the hardware LEDs for switch ports 1-5
The image boots and is able to establish links on both eth0 and eth1.
However, the LED support is not yet working as expected.
2015-02-21 11:34:52 +01:00
Alexander Couzens
59f13eb186
ar71xx/sysmocom: fix JB02 mips machine
...
setup function name wasn't renamed when mach file split up for both boards
2015-02-18 03:15:47 +01:00
Alexander Couzens
fecdb0e772
ar71xx/sysmocom: fix build of sysmocom board
...
sysmocom boards wasn't build because they aren't included by a Makefile
2015-02-18 03:15:41 +01:00
Alexander Couzens
6547fca3bd
ar71xx/sysmocom: use config symbol ATH79_MACH_SYSMOCOM for all sysmocom boards
2015-02-18 03:14:42 +01:00
Alexander Couzens
7c5dcd7b26
ar71xx/sysmocom: fix sysmocom miswritten mach type in mach-sysmocom.c
2015-02-18 01:54:24 +01:00
Alexander Couzens
ee389e3c9e
sysmocom use a multiprofile for both boards AP1 + JB02
2015-02-10 15:51:12 +01:00
Alexander Couzens
bbc86587e4
add sysmocom devices SOB-AP1 SOB-JB02
2015-02-10 15:51:12 +01:00
blogic
27723a734e
BB : ramips : Backport for Kingston MLWG2
...
Backport r43990 to Barrier Breaker.
http://wiki.openwrt.org/toh/kingston/mlwg2
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
target/linux/ramips/base-files/etc/diag.sh | 3 +++
target/linux/ramips/base-files/etc/uci-defaults/01_leds | 4 +++
target/linux/ramips/base-files/etc/uci-defaults/02_network | 4 +++
target/linux/ramips/base-files/lib/ramips.sh | 3 +++
target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/MLWG2.dts | 118 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
target/linux/ramips/image/Makefile | 2 ++
7 files changed, 135 insertions(+)
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@44160 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-28 10:37:51 +00:00
nbd
d12dc6e491
ar71xx: backport restart fix from r43777 ( fixes #17839 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@44065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-20 16:41:46 +00:00
blogic
8d615537e2
ar71xx: add support for TL-WA701ND v2
...
Signed-off-by: Luigi Tarenga <luigi.tarenga@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@44064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-20 15:49:04 +00:00
nbd
60abf1305e
kernel: bridge: multicast: backport a few more fixes for 3.10
...
The following patches unfortunately didn't hit the kernel stable
branches yet, therefore cherrypicking them for OpenWRT here:
* bridge: fix netfilter/NF_BR_LOCAL_OUT for own, locally generated queries
* bridge: multicast: enable snooping on general queries only
* bridge: multicast: add sanity check for general query destination
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Backport of r43841
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@44049 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-19 01:13:25 +00:00
nbd
0484ab40b5
ar71xx: Fix LED definitions for the DRAGINO2 board
...
This patch fixes LED definitions for the DRAGINO2 board.
1. It renames the Router/USB led to System, as it is now marked "SYS" on the board.
2. It gives control of the LAN and WAN leds and some other GPIOs to Linux.
3. It fixes the active_low property for the LAN and WAN leds.
4. It sets up WLAN, LAN and WAN leds in the UCI defaults.
5. It allows usage of the System led by the diag.sh script, so it will be used to indicate boot and failsafe status.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
Backport of r42897
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43867 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-07 16:47:38 +00:00
nbd
293a26f301
kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation ( #17625 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r43736
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-12-17 12:29:04 +00:00
nbd
8d70173107
mpc85xx: add missing devicetree ranges property for ethernet devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r43624
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-12-13 11:44:04 +00:00
jogo
11aaa9e76e
BB: brcm63xx: uci-defaults: network: move DSL-274x1 F1 to right section
...
The cpu port is at 8, not 5.
Fixes #18406 .
Backport of r43379.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-25 19:09:55 +00:00
blogic
a0f836e7f3
ralink: disable the ICPlus phy driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-19 14:36:43 +00:00
blogic
cd98636485
ralink: backport the pcie reset fix for mt7620a
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43313 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-19 10:59:12 +00:00
blogic
d6d3e93c3a
ralink: backport the ethernet driver from trunk
...
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-19 10:59:10 +00:00
blogic
f5a22ddf41
lantiq: vgv7519: set some defaults for leds
...
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-17 08:31:14 +00:00
blogic
57724ec441
lantiq: set default led configuration from /sys entry later, after per board settings
...
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-17 08:31:06 +00:00
blogic
b3fb1ee5a5
lantiq: Concatenate multiple flash chips for lantiq-flash (fixed regression)
...
Signed-off-by: Maikel Bloemendal <openwrt@maikelenyvonne.nl>
Tested-by: Eddi De Pieri <eddi@depieri.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43284 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-17 08:31:03 +00:00
rmilecki
58e9eadd67
kernel: ssb: add PCI ID 0x4351
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r43221
git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-11-08 21:00:20 +00:00