Loading views for custom models from module data files was not possible because
custom models and fields were introduced into the registry after all modules
were loaded. As a consequence, the view architecture did not pass the checks.
This patch takes a different approach: custom models and fields are loaded
early on in the registry, so that views can be validated. The trick is to take
special care of relational custom fields: we skip them if their comodel does
not appear in the registry. This allows to install and upgrade modules that
create/modify custom models, fields and views for them.
Translations are not transfered from temporary table tmp_ir_translation_import
to ir_translation if translation already exists (using `find_expr`).
In case of import of QWeb terms (name = 'website'), the criteria was too weak,
finding already present terms in translations for different modules.
e.g. term "Quantity" is already present in a QWeb view from sale module and was
not imported for the translations of the website_sale module.
Fixed by adding the filter criteria 'irt.module = ti.module'
In case QWeb translations for the same term in the same modules were added in
two imports (second term added in the future), the second was still ignored.
Changed condition to check the res_id for views as well.
Fixes#4239
During a migration of database, it is possible that some custom field
("x_", state is 'manual') are relational to model from a module that is
not provided.
Note: this used to work in Odoo 7.0 but crashed in 8.0.
Closes#3877
QWeb monetary widget uses the precision of the currency to know the number of
digits to display on a price. The number of digits is based on log10(rounding).
For currency with rounding different than 10^x (e.g. in Switzerland 0.05
to allow 5 cents coins only), the number of displayed digits should be rounded
up. e.g. log10(0.05) is -1.3, rounded up to 2 digits.
Fixes#3233
When deleting a partner with some contacts, if the contacts had selected
the "use parent address" checkbox, the address of the contacts was stucked in
readonly mode (no checkbox to disable it).
Disable use_parent_address for orphan partners.
Fixes#3611#3613
The name_get of res.partner.bank uses the format_layout to generate the name
of the bank. As every field is not required, we may get 'False' in the name.
Replace these missing values by an empty string.
Fixes#3590
This is safer to avoid inadvertently dropping customizations,
and does not impact the normal update/uninstall process, which
is based on the dependency order.
Creating custom fields would crash on a model that has a related field without
string. The crash was caused by the field not being set up, and method
BaseModel._field_create() violating a non-null constraint on the field string.
This has been fixed by setting up fields before updating ir_model_fields.
Deleting a custom field could also cause trouble when that field is inherited
in a child model. In that case, the registry was simply no longer consistent.
The fix is to reload completely the registry.
The modification of custom fields was not reflected on field objects. The fix
applies changes on fields before updating columns accordingly.
The old-api model._all_columns contains information about model._columns and
inherited columns. This dictionary is missing new-api computed non-stored
fields, and the new field objects provide a more readable api...
This commit contains the following changes:
- adapt several methods of BaseModel to use fields instead of columns and
_all_columns
- copy all semantic-free attributes of related fields from their source
- add attribute 'group_operator' on integer and float fields
- base, base_action_rule, crm, edi, hr, mail, mass_mailing, pad,
payment_acquirer, share, website, website_crm, website_mail: simply use
_fields instead of _all_columns
- base, decimal_precision, website: adapt qweb rendering methods to use fields
instead of columns
Add rounding_method parameter on float_round method to offer
HALF-UP (default, usual round) or UP (ceiling) rounding method.
Use the second method instead of math.ceil() for product
reservations.
For UP, the python math.ceil() method uses "torwards infinity"
rounding method while we want "away from zero".
Therefore we use the absolute value of normalized_value to make
sure than -1.8 is rounded to -2.0 and not -1.
Fixes#1125#2793
This is a cherry-pick of d4972ff which was reverted at 333852e due
to remaining issue with negative values.
In some cases (e.g. with record rules), the name_get might not have access
to the parent name. Therefore a parent_name related field solves the
issue (as it read with as superuser).
Compute methods could give results that should not be considered as default
values. For instance, a related field usually defaults to a null value, which
is then set to the field with its inverse method by create(). This may violate
a non-null constraint if the original field is required. Therefore, compute
methods are no longer used to determine default values.
Rev f2cf6ced1 modified RFC2822 parsing in order to better support
unicode characters inside the Name part of an address header.
However the patch broke handling of multiple addresses (comma
separated) - silently discarding all recipients except the
first one, as soon as any non-ASCII character was present.
This patch restores the functionality while preserving the
fix from f2cf6ced1, and simplifies the code using email.utils
utility functions.
Fixes (again) lp:1272610, OPW 607683
This solves a subtle issue: in the following case, the class Bar should
override the default value set by Foo. But in practice it was not working,
because _defaults is looked up before field.default.
class Foo(models.Model):
_name = 'foo'
_columns = {
'foo': fields.char('Foo'),
}
_defaults = {
'foo': "Foo",
}
class Bar(models.Model):
_inherit = 'foo'
foo = fields.Char(default="Bar")
The change makes field.default and the model's _defaults consistent with each
other.
also fix the corresponding text and add explicit sequence number because I
don't understand what the bloody hell it does without that, except that it's
not the right thing. At all.
Consider the following example:
class Foo(models.Model):
_name = 'foo'
_columns = {
'state': fields.selection([('a', 'A')]),
}
class Bar(models.Model):
_inherit = 'foo'
state = fields.Selection(selection_add=[('b', 'B')])
The attribute 'column' of the field does not have the full selection list,
therefore the column object cannot not be reused, even a copy of it. The
solution is to systematically recreate the column from the field's final
specification, except for function fields that have no sensible way for being
recreated.
* fix mapping handling to match JS impl: current value set as _value instead
of being lost
* add handling of integer parameter
* only set _size and _last if current iterable is sized
Changed render_att_att to return an iterable of pairs instead of a pair, and
dispatched t-att on whether its result is a Mapping.
Also changed qweb test runner so it uses ordereddict for JSON mapping in
params, otherwise iteration order (and thus order of attributes in output) is
unpredictable and results don't/can't match expectations (as both are
strings).
Note that this relies on JS implementation details wrt iteration order of
mappings. Tests would probably be somewhat less brittle if rendering output
was parsed to XML... if that's possible (?)
* document qweb based (mostly) on JS version
* convert JS qweb tests to (mostly) language-independent XML so they can be
used for JS and Python implementations
* add some more tests (e.g. precedence between t-value and body in t-set)
* remove ``t-import``
* fix parity in foreach(dict) (and rename some variables to make array and
object versions more similar)
A security has been introduce in eb9113c04d to restrict access to orphan attachments to employees only
Assets need to be build and accessed as superuser, thus
This reverts commit d4972ffdb6.
Seems to break some cases, at least in _product_reserve from stock/stock.py
Actual use case:
SELECT product_uom, sum(product_qty) AS product_qty FROM stock_move WHERE location_dest_id=%s AND location_id<>%s AND product_id=3645 AND state='done' GROUP BY product_uom;
returning 1 | 6
SELECT product_uom,-sum(product_qty) AS product_qty FROM stock_move WHERE location_id=%s AND location_dest_id<>%s AND product_id=%s AND state in ('done', 'assigned') GROUP BY product_uom;
returning 1 | -6
results += cr.dictfetchall()
total = 0.0
results2 = 0.0
for r in results:
amount = uom_obj._compute_qty(cr, uid, r['product_uom'], r['product_qty'], context.get('uom', False))
results2 += amount
total += amount
Total = 1, amount = -5
It should actually be
Total = 0, amount = -6
The Edit button never appeared anymore for these users.
The idea was that they should see an edit button with
limited editing capabilities depending on their other
access rights.
For example, someone with only Sales Manager access and
'Display Editor Bar on Website'
would be able to edit online quotes from the website_quote
module, but not change the actual website pages or menus,
for instance.