The PMIC is often a dependency for other devices, so make sure
it's initialized early. While at it, merge the spi/i2c registration
into a single initcall and use IS_ENABLED instead of ifdefs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards have to initialize the PMIC before other devices can
be initialized. This requires three levels of initcalls: one level
in which the PMIC is probed, one in which the board can call mc13xxx_get()
and the third one to initialize the PMIC dependent devices.
Allow to register a callback which is called once the PMIC is initialized.
This way mc13xxx_get() is no longer necessary and the number of required
initcalls levels is reduced to two.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rework the current framework so that I/O mapped I/O resources are
also possible.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No reason to make SYSCON driver name unique to that processor.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no reason to print used region each time.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch moves support for MC34708 PMIC into mc13xxx driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Our driver matches stmpe-i2c and stmpe-spi. It seems the device
we really support is the stmpe1601, so use this one for matching
the devicetree compatible.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for system controller register driver (SYSCON).
Code taken from Linux Kernel and adapted for using in barebox.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides rename MFD-related symbols for using MFD-prefix.
Additionally, sorting mfd/Kconfig and mfd/Makefile records.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MC34708 depend on I2C or SPI, so let driver depend on SPI too
and rename config option name to MFD_MC34708.
Signed-off-by: Wjatscheslaw Stoljarski <wjatscheslaw.stoljarski@kiwigrid.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a I2C bus on which the I2C devices and drivers register.
This makes it cleaner as I2C devices won't accidently end up probed by
a platform_device driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a SPI bus on which the SPI devices and drivers register.
This makes it cleaner as SPI devices won't accidently end up probed by
a platform_device driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Upcoming patches will put I2C/SPI on their own busses with
spi_register_driver / i2c_register_driver which will only
be available if the subsystem is enabled. We could provide
static inlines, but it wouldn't make much sense to compile
a spi/i2c driver if the corresponding subsystem is disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Upcoming patches will put I2C/SPI on their own busses with
spi_register_driver / i2c_register_driver which will only
be available if the subsystem is enabled. We could provide
static inlines, but it wouldn't make much sense to compile
a spi/i2c driver if the corresponding subsystem is disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The stmpe mfds can be connected via i2c and spi. This driver provides the basic
infrastructure for the i2c kind. It can be added as a normal i2c-device in the
board code. To enable functions a platform_data struct has to be provided, that
describes what parts of the chip are to be used.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A string allocated by asprintf is not freed, so change it to a sprintf
with the preallocated buffer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Board support units must use only the provided functions.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provide setup for SPI clk frequency global to driver.
For MC13783 maximum clock frequency is 20 MHz,
for MC13892 maximum clock frequency is 26 MHz,
so we define 20 MHz as a maximum SPI clk.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The mc13xxx driver correctly bails out on failure, but leaves
mc_dev initialized, so a later mc13xxx_get won't fail but returns
an invalid pointer. Fix this. While at it, remove some superfluous
code from mc13xxx_get.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Beniamino Galvani
Michel Stam
Alexander Shiyan
Wjatscheslaw Stoljarski (Slawa)
Vicente
Steffen Trumtrar