add the same target barebox.s (with a lowercase 's')
to make both work with barebox.S and barebox.s.
Signed-off-by: Du Huanpeng <u74147@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the make infrastructure to build multiple SoC or
board specific images from a single barebox binary.
The basic idea is that we no longer have a single pbl, but instead
multiple pbls, one per image if necessary. Each pbl is defined
by its entry function so that each pbl can do exactly what a given
board needs. Additionally the pbls together with a self extracting
barebox binary can be encapsulated in specific image formats.
squashed in build fixes from Lucas Stach for make version >= 3.82:
Split Multimage Makefile rule in explicit and implicit parts
Fixes build with make version >=3.82
Frome the make 3.82 NEWS file:
* WARNING: Backward-incompatibility!
In previous versions of make it was acceptable to list one or more explicit
targets followed by one or more pattern targets in the same rule and it
worked "as expected". However, this was not documented as acceptable and if
you listed any explicit targets AFTER the pattern targets, the entire rule
would be mis-parsed. This release removes this ability completely: make
will generate an error message if you mix explicit and pattern targets in
the same rule.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lucas Stach <dev@lynxeye.de>
When a ARCH_MVEBU platform is selected, generate barebox.kwb and
barebox.kwbuart images from barebox.bin, using kwbimage.
barebox.kwb is generated by executing kwbimage on the board
kwbimage.cfg file, and is therefore designed to be booted from the
default boot media of the board, as defined by kwbimage.cfg (typically
a NAND flash or SPI flash).
barebox.kwbuart is generated by executing kwbimage on the board
kwbimage.cfg file, but by overriding the boot media to be UART. This
image is suitable for usage with the kwbtool and is generally useful
for recovery purposes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Squashed this fixup:
arm: ensure the build doesn't fail when kwbimage lacks the binary blob
mach-mvebu images for Armada 370 and Armada XP SoC require a DDR3
training code which should be extracted from existing bootable images
for the relevant board. When such binary blob has not been extracted,
the build of the .kwb and .kwbuart images will fail. This is annoying
as it makes the build of all Armada 370/XP defconfig fail, which can
be a problem for automated builds.
This proposal makes the failure of kwbimage not a fatal failure for
the build process, and shows a warning. The user therefore sees:
====================================================================
KWB barebox.kwb
Didn't find the file 'plathome-openblocks-ax3-binary.0' in '/home/thomas/projets/barebox' which is mandatory to generate the image
This file generally contains the DDR3 training code, and should be extracted from an existing bootable
image for your board. See 'kwbimage -x' to extract it from an existing image.
Could not create image
WARNING: Couldn't create KWB image due to previous errors.
KWBUART barebox.kwbuart
Didn't find the file 'plathome-openblocks-ax3-binary.0' in '/home/thomas/projets/barebox' which is mandatory to generate the image
This file generally contains the DDR3 training code, and should be extracted from an existing bootable
image for your board. See 'kwbimage -x' to extract it from an existing image.
Could not create image
WARNING Couldn't create KWB image due to previous errors.
====================================================================
The only drawback is that barebox-flash-image, which normally points
to barebox.kwb, becomes a stale symbolic link.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This command is already defined in scripts/Makefile.lib, which is included
from Makefile.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Patch creates empty <config.h> if this header is not needed by board.
This will allow to remove many empty config.h files from boards.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Add rules to generate dtb files in arch/arm/dts/
- add an initcall which unflattens and probes the internal devicetree
- Add skeleton devicetree
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This syncs the localversion generation with the kernel.
At least one effect is that a barebox built from a tar archive no
longer marks itself as dirty. Also it moves some stuff from a scary
Makefile to a not-so-scary shell script.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can use to check pbl
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CDPATH has sideeffects when generating barebox_default_env.h (printing
the directory name into the header file), causing a build failure.
Disable it for the build.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Booting from SPI on an AM35xx (and possibly other TI SOCs) requires
a special format:
- 32 bit image size in big-endian
- 32 bit load address in big-endian
- binary image converted from little- to big-endian
The mk-am35xx-spi-image tool converts barebox.bin to
this format.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is mostly useful during the initial port of barebox to a new
board which is supported by u-boot. It also allows starting barebox
from a SRAM-based u-boot SPL.
A different load address can be set like this:
make barebox.uimage UIMAGE_BASE=0x80000000
Also add barebox.ubl to CLEAN_FILES.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The dependencies for generating the environment do not work properly:
- If files are removed from the defaultenv, a subsequent make will not
update the default environment.
- If CONFIG_DEFAULT_ENVIRONMENT_PATH changes, the default environment
also will not be regenerated.
This patch fixes this by introducing a cmd_env which has the content of
$(ENV_FILES) in the command so that the if_changed mechanism recognizes
a change when $(ENV_FILE) changes. This also results in a nice " ENV "
string in the build process.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When building a special image from the original (compressed or
not) binary, to not overwrite KBUILD_BINARY.
This allows producing multiple images (such as MLO, UBL, ...)
from the (z)barebox.bin. In the case where no special image is
used, KBUILD_IMAGE is set to KBUILD_BINARY.
This patch was developed together with Sascha Hauer. Thanks!
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Depending on the SoC a barebox.bin, barebox.netx, barebox.s5p, MLO image
is generated. With pbl support there now is an additional
arch/arm/pbl/zbarebox.bin image.
To help the user to determine which image should be flashed to his device,
generate a barebox-flash-image link.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
disasm: For generating an disasssembly of an ELF file
ln: For creating a softlink
Use the disasm command for generating barebox.S
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This allows for creating a pre-bootloader binary for
- nand boot
- mmc boot
- compressed image
The pbl will be incharge of the lowlevel init if needed.
The barebox will skip it.
Import string functions from linux 3.4 (arch/arm/boot/compressed/string.c) and
implement a dummy panic.
For now on introduce dummy zbarebox* targets and c code that will contain later
the decompressor. This only implemeted on ARM.
This patch is based on Sascha Hauer <s.hauer@pengutronix.de>
Add compressed image support patch
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This will allow to link compiled object to the built-in-pbl.o across the source
tree that will be finally link to the pbl.
Now we compile the source %.c in pbl-%.o and provide -D__PBL__
so we can known in the source when it's compile for barebox or the pbl.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
If CONFIG_KALLSYMS is not set then barebox version is always "#0".
By-default on mips boards CONFIG_KALLSYMS don't set, so barebox
version does not increase after every build.
This patch fixes the problem.
Signed-off-by: Svetlana Khafizova <sv.khafizova@gmail.com>
Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Acked-by:: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
The bareboxenv-target binary is automatically created but never
deleted nor is it excluded from git tracking. This patch remedies
the situation by adding scripts/bareboxenv-target to .gitignnore
and adjusting the list of to be deleted files of the 'clean' target
in the core Makefile.
Signed-off-by: Roberto Nibali <rnibali@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds the scripts/mkcompile_h from the Kernel. This gives
us additional information about the build like who built this binary
and with which compiler. Currently the only information used is the
build timestamp and the generation number.
This also fixes the build timestamp in the banner which is now correct
even with consecutive builds without making clean in between.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When building sandbox with ccache, one would hit warnings such as:
warning: 'struct mmsghdr' declared inside parameter list
on random files; a way to reproduce this issue is to build a simple
file doing just:
#include <sys/socket.h>
int main(void) {
return 0;
}
gcc -Wall -P -c -o foo foo.c
But actually the -P flag is only useful when generating non-C files,
such as linker scripts in the case of barebox. Removing the -P flag
from all the gcc invocations, except when generating .lds files makes
the warning go away. It turns out that this is what
linux/scripts/Makefile.build also does nowadays.
Signed-off-by: Loïc Minier <loic.minier@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this kallsyms finally start working at least on ARM. This
enables us resolving addresses into symbols which is particularly
useful in combination with stack unwinding support. As kallsyms
now compile and work we can remove the depends on BROKEN.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Du Huanpeng
Sascha Hauer
Darren Garnier
Thomas Petazzoni
Jan Luebbe
Alexander Shiyan
Jean-Christophe PLAGNIOL-VILLARD
Antony Pavlov
Wolfram Sang
Svetlana Khafizova
Roberto Nibali
Alexey Galakhov
Loïc Minier
Marc Kleine-Budde