This patch adds a flags argument to the of_find_path() function. The only flag
defined for now is OF_FIND_PATH_FLAGS_BB. When used on NAND devices, the
function returns the bad block aware device (the ".bb" device).
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes the LIST_HEAD of_partition_list and a struct definition from
the code. This was present but unused, since the file was added to barebox.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With deferred probing, -EPROBE_DEFER is not worth spilling an error.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_alias_get assumed that a DT path is always the full node path,
whic is not necessarily the case, as there are other valid path
descriptions. All of them are handled by of_find_node_by_path.
As there is already a preparsed list with all DT aliases that handles
this case properly we can simply reuse that one.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If creating an AMBA device failed, maybe because AMBA support is
not compiled in, register the device as regular platform device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file originates in Linux. Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.
This commit was generated by the following commands:
find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
git mv include/sizes.h include/linux/
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, dt_struct is always checked with the same code after
dt_struct_advance(). Move the check after the switch statement.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Function to enable and register a disabled device.
The devices can be registered using the
device node with of_device_enable_and_register() or
with the device node name/path by using the
of_device_enable_and_register_by_name() function.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Set a property to a phandle of a child node. This may be used
for selections like display-timings.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added of_parse_phandle_from() to be able to use external root nodes.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added of_find_node_by_phandle_from() to find nodes by
phandle with a given root node.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Check for the return value of devfs_add_partition with IS_ERR.
Otherwise we dereference a NULL pointer when devfs_add_partition
fails.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on Linux's support by Thomas Petazzoni:
commit b9d12085f2f531fdea67f0361564e0812696227c
Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Tue Apr 15 15:50:19 2014 +0200
net: phy: add minimal support for QSGMII PHY
This commit adds the necessary definitions for the PHY layer to
recognize "qsgmii" as a valid PHY interface. A QSMII interface, as
defined at
http://en.wikipedia.org/wiki/Media_Independent_Interface#Quad_Serial_Gigabit_Media_Independent_Interface,
is "is a method of combining four SGMII lines into a 5Gbit/s
interface. QSGMII, like SGMII, uses LVDS signalling for the TX and RX
data and a single LVDS clock signal. QSGMII uses significantly fewer
signal lines than four SGMII busses."
This type of MAC <-> PHY connection might require special handling on
the MAC driver side, so it should be possible to express this type of
MAC <-> PHY connection, for example in the Device Tree.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
DT PCI address translation needs a special handling. This imports
the corresponding translator into of/address.c but makes it selectable
through Kconfig. Compared to the Linux version, we don't check for
struct device_node's type which does not exist on Barebox but directly
for device_type property set to "pci".
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ePAPR defines phy-connection-type as standard property for PHY interface
between Ethernet device and PHY device. Add corresponding property check
to of_get_phy_mode.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I assume I am the only person knowing that barebox is able to
merge devicetrees. This feature seems broken for a while now since
trying to merge devicetress results in:
unflatten: too many end nodes
Remove this feature to save the complexity.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a mtd device can have bad blocks we want to create a
bb device, so do this automatically. This allows us to
drop bb device creation from the environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of just allowing to specify an OF path with additional
partname: property allow to specify a phandle to the partition
directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_get_named_gpio_flags used to return 'ret' when no device
is found, but 'ret' is zero here. Return an error instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ePAPR 1.1 specifies the "stdout-path" property, but barebox currently
only handles the "linux,stdout-path" property. Add parsing for the new
property name.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jan Luebbe
Sascha Hauer
Marc Kleine-Budde
Sebastian Hesselbarth
Lucas Stach
Wadim Egorov
Masahiro Yamada
Lucas Stach
Jan Luebbe
Teresa Gámez
Raphaël Poggi
Antony Pavlov
Ezequiel Garcia