Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This better separates the DMA from the MMU functionality.
Also move all drivers that only depends on asm/mmu.h for the alloc
functions over to the common header.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As a lot drivers currently rely on the 1:1 virt->phys mapping on ARM
we define DMA_ADDRESS_BROKEN to mark them. In order to use them on
other architectures with a different mapping they need proper fixing.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file originates in Linux. Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.
This commit was generated by the following commands:
find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
git mv include/sizes.h include/linux/
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Compiling the tree with allyesconfig is helpful because different
compilers (gcc, clang) or static checkers (e.g. clang's scan-build)
can then process and check more code.
This patch introduces two new configuration symbols that Kconfig files
can depend on. That way, code that is only working where a cache or DMA
implementation exists can be opted out.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed; The FSF site says that
address is
Free Software Foundation
51 Franklin Street, Fifth Floor
Boston, MA 02110-1301
USA
(see http://www.fsf.org/about/contact/)
Instead of updating it each time the address changes,
just drop it completely treewide.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this allows SATA to work on i.MX53 QSB-R :
barebox@Freescale i.MX53 Quick Start-R Board:/ ata0.probe=1
imx-sata 10000000.sata: port 0: SATA link ok
imx-sata 10000000.sata: port 0: Spinning up device...
imx-sata 10000000.sata: port 0: ok.
ata0: registered /dev/ata0
before this fix the log was :
barebox@Freescale i.MX53 Quick Start-R Board:/ ata0.probe=1
imx-sata 10000000.sata: port 0: SATA link timeout
set parameter: Connection timed out
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Embedding struct ata_ioports into struct ide_port saves us an allocation.
Making it available to client drivers is necessary to give them access
to struct ata_port which is needed in the next patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To get persistent devicenames under /dev/ allow to set the
devicename from the driver instead of using "ata" unconditionally.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We need ata_id_has_lba48() in another C file, so move
the ATA_ID_* stuff to include/ata_drive.h like in the Linux
Kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since the info is device specific and not driver specific, attach
the callback to the device. This makes it possible to have a info
callback for a device which does not have a driver attached.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
DISK_DRIVE is missing in Kconfig, so remove the "select" statement.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that we have framework support for delayed probing of
ata devices implement it in the ahci driver to actually make use
of it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ata device usually take a long time to spin up, so it makes sense
to only spend this time when the device is actually used.
This adds a logical ata device and attaches a 'probe' parameter
to it, similar to what MMC does.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The following commit accidently bailed out if the link is up, not
when it's down as stated in the commit message.
| commit a3f74d928c
| Author: Rob Herring <rob.herring@calxeda.com>
| Date: Mon Feb 11 18:02:00 2013 +0100
|
| ahci: handle COMINIT received during spin-up
|
| Some Intel SSDs can send a COMINIT after the initial COMRESET. This causes
| the link to go down and we need to re-initialize the link.
|
| Signed-off-by: Rob Herring <rob.herring@calxeda.com>
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
calxeda use the generic driver but have it's own compatible cf Linux kernel
Documentation
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some Intel SSDs can send a COMINIT after the initial COMRESET. This causes
the link to go down and we need to re-initialize the link.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox not contain symbol DISK_DRIVE, so remove all references to it.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the glue code for the i.MX SATA controller. This controller
needs some i.MX specific setup and some SoC specific setting outside
the controller itself. The code for setting up the correct clock source
for the SATA phy has been taken from U-Boot.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds ahci controller support based on U-Boot ahci support. Unlike
U-Boot we do not push the SCSI layer in between, but use the ata interface
directly. Tested on a Freescale i.MX53.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ATA devices using DMA may need a sufficiently aligned buffer, so use
dma_alloc instead of regular malloc.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Lucas Stach
Masahiro Yamada
Sascha Hauer
Holger Schurig
Antony Pavlov
Alexander Shiyan
Michel Stam
Eric Bénard
Alexander Aring
Jean-Christophe PLAGNIOL-VILLARD
Rob Herring