The image will be named after the official name of this board:
barebox-freescale-mx6-sabreline.img
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Image payload size should always be a multiple of 4 bytes. This fixes
mis-sized image payload by allocating payload buffer as multiple of 4
but load true filesize into the payload buffer.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Xmodem blocks should start with SOH but kwboot never sets the first
block byte. This fixes kwboot's Xmodem block initialization and sets
first block byte to SOH.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Pull the board device reset GPIO pin high as this prevents
PCI bus probing.
The function da923rc_board_init_r is called at the postcore
initcall level so that the udelay function can take advantage
of the core initialisation.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The clock frequency property of the device tree node fsl,mpic is
added as it is needed by the PCI driver to function in newer
Linux version.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We need #include "mmci.h" only and not #include <mmci.h>
which don't exists.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the name '__promptme' does not make clear what the variable means. rename
it to 'interrupt' which is set to true when the user has hit ctrl-c.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
input.__promptme is no valid indicator that run_shell should be left.
It should be left on executing the 'exit' builtin which is indicated
by a return code < 0 from parse_stream_outer(). Track this with an extra
variable and use it as a condition to return from an interactive shell.
This fixes the weird behaviour that hush exits (and the user finds itself
in the menu) when a syntax error occured.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current implementation of the bootloader specification depends on the
hardware name and the name of the device in /dev to match. As the default
hardware name is mciX and the device name is diskY the bootloader spec
cannot be used as is.
This patch implements a way to overwrite the device name similar to what is
possible for the imx-esdhc driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
boot -l crashes with CONFIG_MENU disabled because blspec_alloc returns
with blspec->menu being NULL in this case. So guard the usage of
blspec->menu accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a DT init function to clk-fixed and corresponding CLK_OF_DECLARE
to put it into the DT clock provider table.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a call to of_clk_init right after platform devices have been
populated.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This add barebox versions of of_clk_init for parsing and registering
clock providers from DT. Also, a macro CLK_OF_DECLARE is added, that
allows to put init callbacks into its own section that can be linked
in the binary.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds an .oftables section right before .dtb section with
BAREBOX_CLK_TABLE to ARM linker script.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a macro for linker scripts to place DT clock provider table.
While at it, also add ALIGN(8) to DTB macro and fix a whitespace issue.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a callback function to read the current state of a GPIOs
in/out direction.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds some more printf information to gpiolib command, like the
gpiochip handling a specific gpio. Also, current direction and value
of the gpio are printed, if the gpiochip provides the corresponding
callbacks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
At least for debugging purposes it is helpful to determine the current
direction for a given GPIO. Add a callback to gpiochip, to allow to
get it.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This disables LEDs that have a trigger function assigned right before
the trigger is installed. As the trigger was parsed before the LED has
been registered, also swap LED registration and trigger parsing.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Due to unwind tables being generated by recent versions of gcc by
default, the x86 Barebox link fails with:
ld: section .eh_frame loaded at [00000000000197c4,000000000001f31f]
overlaps section .barebox_initcalls loaded at [00000000000197c4,0000000000019833]
Passing -fno-unwind-tables -fno-asynchronous-unwind-tables avoids this
problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The documentation says setupmbr should be used with the image named
'barebox', but it should instead be done with the 'barebox.bin'
image. Attempting to use setupmbr on the ELF barebox image simply
fails:
$ ./scripts/setupmbr/setupmbr -s 32 -m ./barebox -d disk.img
No MBR signature found
barebox image seems not valid: Bad MBR signature
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%i" in format string requires a signed integer.
"%d" in format string requires a signed integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%u" in format string requires a unsigned integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%d" in format string requires a signed integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%d" in format string requires a signed integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%d" in format string requires a signed integer.
"%u" in format string requires a unsigned integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format.
No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%d" in format string requires a signed integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
asm/hardware.h does not have any content except including mach/hardware.h.
include mach/hardware.h directly where needed and get rid of asm/hardware.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No functional change, just reorder the initialization of
the different offset/size members of fdt_header in increasing
order to make it easier to read.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Philipp Zabel
Sebastian Hesselbarth
Renaud Barbier
Alexander Aring
Alexander Shiyan
Sascha Hauer
Uwe Kleine-König
Thomas Petazzoni