This makes it possible to modify the tree in the handlers.
This is necessary because the initrd addresses are only
known inside the handlers, but not to the generic bootm
code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CFI Flash is currently handled outside the mtd layer which makes it
a special case. Integrate it into mtd so that we get rid of this
special status.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add barebox-data section in arm branch to get complete
barebox regions in sdram regions tree.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change function remap_range in arm architecture to make it
global accessable. For example command 'memtest' can change
pte flags to enable or disable cache.
Add dummy function for others architectures that doesn't
have mmu or pte support.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox not contain symbol HAS_CFI, so remove all references to it.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The end boundary of each registers set may overlap with the start
of the next register set. Subtract 1 to the end boundary.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support for both i2c busses on the p2020rdb board is added and the
configuration file is updated to add the I2C driver and commands.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A function to calculate the frequency divider and digital filter sampling rate
for the 85xx processors is added to the i2c-imx driver. Hence, this driver is
usable on IMX and 85xx machines.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file is copied from Linux 2.6.39. It is added so that the P2020RDB
can still build.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In order to use the IMX i2c driver on the mpc85xx SOC, the file mach/clocks.h
is renamed mach/clock.h. Files using this header are updated accordingly.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i2c-imx driver is able to support the I2C bus on the 85xx machines
with minor modifications. It already defines register offsets. Therefore,
this header file is no longer needed.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A function that returns the system bus frequency used to compute the i2c bus
frequency is added for future use.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Minimal support of the Ethernet interface on the P2020RDB board. Only
the eTSEC3 interface is supported.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The fsl_eth_init function maps the TSEC registers (MAC, TBI and
external PHY access registers). It also passes the PHY address and
TBI registers initialization values.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This update adds the GIANFAR driver along with the configuration
and build files.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In view of the introduction of the GIANFAR Ethernet driver,
the mdio and gianfar base address are defined.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers call dma_inv_range() on buffers, on arm these buffers must
be cache line aligned. This patch introduces a generic dma_alloc,
dma_free. Archs can implement in their own functions in "asm/dma.h" and add a:
#define dma_alloc dma_alloc
#define dma_free dma_free
On all other archs the generic versions, which translate into xmalloc
and free are used.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is limited board support for the Freescale P2020RDB in single CPU
mode. The DDR is configured for a memory bus running at 667Mhz.
The system boots from NOR flash and provides the console at 115200
bauds, no other drivers are included.
Finally, the PPC Kconfig and make file make the building of
the P2020RDB platform firmware possible.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Kconfig and Makefile allow to include the 85xx cpu support in the
compilation process.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
_text_base assignment has been removed earlier from lib/board.c
for the mpc5xxx.
For the 85xx, _text_base is set to where the firmware relocates
in memory as passed by the function input variable.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds initialization functions used by the e500v2 start-up code
and board specific code (L2 cache initialization).
Other functions help identify the CPU or return the programmed memory size.
Finally, the Makefile and Kconfig file are added.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch contains functions that returns information on
the CPU and buses frequency (LBC, DDR, system).
It also includes the clock source driver.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch includes functions to initialize LAW registers and
the chip select 0 of the CPU.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch defines functions to set interrupt vector registers and
functions to handle hardware exceptions.
It also defines support functions to set and search TLBs.
Finally, the Makefile is added.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is the first part of the start-up code. The source code origin is
U-boot and is slightly modified to have e500v2 CPU support in 32-bit
mode only.
It includes the power-up entry point, CPU initialization code and
exports definition for D-cache flush and I-cache invalidate.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These header files are added to provide a minimal support to the
Freescale 85xx cpu to boot on a P2020RDB platform.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The trap relocation function trap_reloc can be used across several PPC
platforms and is added to the ppc library. Accordingly, the definition
of trap_reloc is removed from mach-mpc5xxx/start.S
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Following the MMIO primitives fix, the definitions of __raw_* function
is sourced from Linux and added.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
arch/ppc/Kconfig is reworked to make the configuration environment
architecture neutral. All MPC5200 configuration is moved to the
MPC5200 architecture specific configuration file. These modifications
are reflected in the PCM030 board support.
arch/ppc/Makefile compilation directives are updated in preparation
for the introduction of future cpus/machines.
lib/time.c is moved to the architecture specific directory and the
building instructions updated in the Make files. The file is
cleaned up of unused code.
The definition of L1_CACHE_... is updated and CACHELINE_SIZE is
defined in ppc/include/asm/cache.h for future use by the mpc85xx.
The file mach-mpc5xxx/pci_mpc5200.c and mach-mpc5xxx/start.S are
updated accordingly.
The declaration of search_exception_table is moved in
include/asm/common.h because it is used across architectures.
mach-mpc5xxx/traps.c is also updated to reflect this change.
The definition of exception in asm/ppc_asm.tmpl is updated for future
use by the mpc85xx. The file starts.S in mach-mpc5xxx is updated
accordingly.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The device resources are much smaller, the resource mechanism
revealed this because of overlapping devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the bootm code to the new uimage code. Also
bootm can now handle other types of images than uImages.
Currently the only architecture making use of this is
arm which allows to boot zImages, raw images and barebox
images.
I intended to make a more bisectable series from this but
I failed becuase there are many dependencies and no matter
how I tried the patches grew bigger and and bigger. So I
decided to put this all in a single patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The device resources are much smaller, the resource mechanism
revealed this because of overlapping devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All handlers used to just relocate the image without any checks, so
we are doomed if we write outside of SDRAM or will overwrite ourselves.
Move the relocation up to the generic part where we have a chance
of catching these issues.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We never had interrupt support in barebox and we have no plans to
add interrupt support. Even if we do I doubt the current fragments
of irq support are helpful, so remove them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When building sandbox with ccache, one would hit warnings such as:
warning: 'struct mmsghdr' declared inside parameter list
on random files; a way to reproduce this issue is to build a simple
file doing just:
#include <sys/socket.h>
int main(void) {
return 0;
}
gcc -Wall -P -c -o foo foo.c
But actually the -P flag is only useful when generating non-C files,
such as linker scripts in the case of barebox. Removing the -P flag
from all the gcc invocations, except when generating .lds files makes
the warning go away. It turns out that this is what
linux/scripts/Makefile.build also does nowadays.
Signed-off-by: Loïc Minier <loic.minier@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
/dev/self0 and /dev/env0 are in the last MB of nor flash. The
offset depends on the size of the flash, so detect this at
runtime.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We introduced several new functions to ease our life
on ppc, use themn on the pcm030:
- setup iomux and bus clocks in board code
- add sdram memory according to detected size
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old startup process consisted of several CFG_LOWBOOT,
CFG_RAMBOOT ifdeffery which I do not understand. So remove
all this and replace it with:
- put the entry point for second stage loaders to offset 0x0
so that we can do a go /dev/ram0 to start a second barebox
- When we come from the reset vector assume MBAR is at 0x80000000
- When we come from the second stage entry assume that
SPR 311 is in sync with the current MBAR address.
- Switch MBAR to 0xf0000000 and we are done.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This has never been used in barebox and likely is incomplete
and bitrotted over time, so remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Alexander Aring
Alexander Shiyan
Renaud Barbier
Jean-Christophe PLAGNIOL-VILLARD
Marc Kleine-Budde
Antony Pavlov
Loïc Minier