With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.
Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make loading environment from MMC generic for all OMAP.
Tested on AM335x, OMAP4.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Tested-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bootsource functions are not specific to the first stage
bootloader. They may also be used for detecting the
bootsource to decide where to load the environment from.
Also clean up includes in board files.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
environment.h is for environment variables, not for the environment
storage (envfs), so move the prototypes to envfs.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We now have gpio_request. When we call gpio_direction_output before
registering a led_gpio the gpio will be implicitely requested by the
gpio core. gpio_request in the led core will then fail resulting in
an unregistered LED.
Fix this by removing the call to gpio_direction_output. The LED core
will do this anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- remove mach/silicon.h and include omap?-silicon.h directly
- include mach/omap?-clock.h directly where needed
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Register GPIO7 as heartbeat LED, same as in the linux kernel.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add i2c-omap and twlcore driver to panda board.
(Based on similar patch for pcm049).
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If barebox is not used as the MLO, then it crashes during boot
with the below error message:
Board: Texas Instrument's Panda
PandaBoard Revision: 003
omap-hsmmc@mci0: registered as mci0
unable to handle paging request at address 0x4a064010
pc : [<8f01e820>] lr : [<8f0049a0>]
sp : 8cffff80 ip : 00000016 fp : 00100103
r10: 00000000 r9 : 00000ae7 r8 : 4030b76c
r7 : 40300200 r6 : e28f8028 r5 : 0000003e r4 : 00000000
r3 : 4a064000 r2 : 00000014 r1 : 00000001 r0 : 00000001
Flags: nzCv IRQs off FIQs off Mode SVC_32
[<8f01e820>] (panda_devices_init+0x17c/0x1e0) from [<8f006300>] (start_barebox+0x18/0x10c)
[<8f006300>] (start_barebox+0x18/0x10c) from [<8200006c>] (0x8200006c)
[<8f021248>] (unwind_backtrace+0x0/0x98) from [<8f011a00>] (panic+0x28/0x3c)
[<8f011a00>] (panic+0x28/0x3c) from [<8f02171c>] (do_exception+0x10/0x14)
[<8f02171c>] (do_exception+0x10/0x14) from [<8f021784>] (do_data_abort+0x2c/0x38)
[<8f021784>] (do_data_abort+0x2c/0x38) from [<8f021470>] (data_abort+0x50/0x60)
This is because the USBHOST module is not enabled. The module enable
is is normally done in mach-omap/xload.c which never gets called.
Since we're configuring the USBHOST CLKCTRL register in the board file
anyway, we might as well explicitly enable the module in the same place.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, there are multiple definitions of run_shell()
for each board that can be build in "xload" configuration.
Now there is only one function used by all boards.
The functions defined in xload.c are used only when "xload"
configuration used; but it gets compiled unconditionally.
This has been fixed as well.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit c71a77ab8 (ns16550: switch to resource) has introduced generic
read/write access to 16550 register and a 'shift' parameter to allign
register index to physicall registers.
The correct 'shift' value was missing in all omap based boards.
Corrected this to 2 which has fixed the problem.
Tested on a PCM-049 phyCORE-OMAP4 board.
Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Tested-by: Jan Weitzel <J.Weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The new MMU setup will need SDRAM base addresses and sizes.
For this reason convert the MMU enabled ARM boards:
- move mem setup to mem_initcall. This is early but
still makes sure that we already have the console available
- move MMU setup in this initcall temporary as after the mmu_init will generic
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
use generic read/write depending on the memory size
if no reg_read/write defined
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
pass the hccr and hcor register base via resource
instroduce add_generic_usb_echi_device with hccr = base + 0x100 and
hcor = base + 0x140
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Add a helper function for boards to register their memory
devices. This makes the board code smaller and also helps
getting rid of map_base and struct memory_platform_data.
And switch all of the memory to it
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
we keep struct memory_platform_data for now on we will switch off the memories
resources to struct resource
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Sascha Hauer
Teresa Gámez
Jean-Christophe PLAGNIOL-VILLARD
Anand Gadiyar
Sanjeev Premi
Juergen Kilb