The default configuration of the current 2.6.37 kernel uses a flash based BBT.
So, barebox must also use one, to be in sync with the kernel about bad blocks
in the flash.
Due to the used OOB layout, the generic BBT description coming with the
framework can be used.
Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no rule how to connect the SDRAMs to the two clocks signales the CPU
provides. Some boards are using them on a per bank base, some others on a per
chip base. So, the check for the enabled second clock cannot be used to detect
if the second SDRAM bank is populated.
A better way is to check the MT bits of the second SDRAM bank register. When
the init code sets these bits to '00' the second bank is not used for SDRAM
and gets ignored.
Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
At least partly. We have pads in barebox that we do
not have in the kernel. Also, this with this patch we
do not set the sion bit which the kernel does.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The semicolon is a delimiter, not an end marker. With a trailing semicolon the
kernel give the confusing message:
mtd: no mtd-id
With this patch, a semicolon gets added on demand only.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without this patch (against next) I get this:
rsc@thebe:barebox$ make ARCH=arm CROSS_COMPILE=<path>/arm-v5te-linux-gnueabi- menuconfig
HOSTCC scripts/kconfig/lxdialog/checklist.o
HOSTCC scripts/kconfig/lxdialog/inputbox.o
HOSTCC scripts/kconfig/lxdialog/menubox.o
HOSTCC scripts/kconfig/lxdialog/textbox.o
HOSTCC scripts/kconfig/lxdialog/util.o
HOSTCC scripts/kconfig/lxdialog/yesno.o
HOSTCC scripts/kconfig/mconf.o
HOSTLD scripts/kconfig/mconf
scripts/kconfig/mconf Kconfig
warning: (ARCH_IMX25 && ARCH_IMX27 && ARCH_IMX35 && ARCH_IMX51 && ARCH_IMX28) selects ARCH_HAS_FEC_IMX which has unmet direct dependencies (ARCH_IMX)
warning: (ARCH_IMX25 && ARCH_IMX27 && ARCH_IMX35 && ARCH_IMX51 && ARCH_IMX28) selects ARCH_HAS_FEC_IMX which has unmet direct dependencies (ARCH_IMX)
Add the option for the FEC on MX28 as well.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fixes the return values of the update script.
- Exit with an error of the "_update" script fails.
- Add a "else; true" to the crc check, otherwise the script
exits with "1".
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fixes a regression introduced in commit
d15cfafeef.
While there, use "-z" to check if ubiroot variable is empty.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-By: Eric Bnard<eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will all to simplify the sync with the kernel and later easly add the
self decompression support to barebox
as example with a lzo compression will reduce barebox from 180224 to 99863
bytes so 55.41%
-rwxr-xr-x 1 root root 99863 Jan 28 02:17 build/versatilepb/barebox.bin.lzo
we also reduce the binary size by 224 bytes
Old version
# ls -al build/versatilepb/barebox.bin
-rwxr-xr-x 1 root root 180468 Jan 28 02:14 build/versatilepb/barebox.bin
New version
# ls -al build/versatilepb/barebox*
-rwxr-xr-x 1 root root 180244 Jan 28 02:13 build/versatilepb/barebox.bin
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
we use the board revision to specify to the linux kernel the type of lcd
we use. So we can have only one machine for those 3 boards:
- sam9m10-ekes (LG)
- sam9g45-ekes (LG)
- sam9m10g45-ek (Truly)
today we support 2 lcds model:
- LG philips LB043WQ1
- Truly TFT1N4633-E
by default we select the Truly as the sam9m10g45-ek is the most common board
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Video controller of STM allow to control the reset bit of an external
LCD controller. When reset_lcd is set, CTRL1_RESET bit is used to
enable and disable LCD.
Handle USE_LCD_RESET as a flag in imx_fb_platformdata.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When describing an new video interface, it is now possible to select
the bit per pixel. If nothing is chosen 16bpp is selected by default.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This usage printout during startup more looks like there is
something wrong with the environment than a helpful message.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Eric Bénard <eric@eukrea.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
We never supported the sigmatel stm chips and probably
never will. So do the first step and rename the architecture
to mxs just like in the kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reverted upon request of Jean-Christophe. Not needed anymore since:
commit be4146161b
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sun Jan 16 12:12:32 2011 +0100
import swab.h arch implementation form linux v2.3.37
this will avoid __bswapsi2 issue see with gcc 4.5.1
This reverts commit f68dc40804.
it's 0x73f00000 not 0x23f00000 as the other at91
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Saves the boot source into an environment variable so env scripts
can more easily use boot source information.
Note only tested on imx35. I haven't added support for any other variants
because I'm not familiar with them. (And can't test them anyway).
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Ethernet PHY devices have 32 registers, each 16 bits wide. Thus, the size of
the phy device should be 64 bytes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also, make sure that the usb ports are in ulpi mode before configuring
the iomuxer. Otherwise the ulpi transceiver cannot be initialized correctly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also, set size to 0 when setting up the framebuffer failed so that
the user cannot write to uninitialized framebuffer memory.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The menu entry to set the default baudrate (CONFIG_BAUDRATE) makes no sense,
as long as its content is not used. This patch makes barebox using the setting
again.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Juergen Beisert
Sascha Hauer
Juergen Beisert
Jean-Christophe PLAGNIOL-VILLARD
Robert Schwebel
Marc Kleine-Budde
Gregory CLEMENT
Marc Reilly
Baruch Siach