Some console are transient, like the USB connected serial
console which should be removed when the USB connection is
severed.
Enable console removal for such devices.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cramfs does not compile since we updated zlib to the kernel
version. Fix this by using the kernel version of uncompress.c
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
uncompress() has the same prototype as the various kernel decompress
functions. It automatically detects the compression type and selects
the correct uncompress function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Several filetypes can be autodetected. Barebox could make use
of this in several ways:
- Add a command to detect filetypes
- detect arm zImages and uImages to unify the different boot commands
- maybe detect UBI or JFFS2 images to construct parts of the kernel
command line
- select correct uncompression function based on filetype
This patch adds basic support to detect filetypes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The kernel uncompression functions have a unified API. Switch
to the kernel implementation to unify the different uncompression
APIs. As a bonus the kernel implementation is much smaller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The rests of U-Boots iminfo command are sitting in commands/bootm.c and
are in a nonusable state. Factor it out to its own file and make it work
again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We never had interrupt support in barebox and we have no plans to
add interrupt support. Even if we do I doubt the current fragments
of irq support are helpful, so remove them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This simple driver enables a generic driver for ATA type of devices to get
access to the so called 'register file' of an ATA drive.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This changed patch removes more of the u-boot like code and replace it with
kernel like code.
commit 2a8966936af6b54573483ade559d0633e489b515
Author: Juergen Beisert <jbe@pengutronix.de>
Date: Fri Sep 30 15:06:26 2011 +0200
ATA Disk Support: Add support for native ATA type drives
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This covers disk like media like SD card, CF cards, regular hard disks and also
USB mass storage devices. Most common used partition table is still of DOS type.
This implementation is prepared to support more partition types in the future.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For disk like devices attached to MCI, ATA or USB it depends on the order they
will be recognized. So an unique number for all disk like devices is required.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds MMC over SPI support to mci-core.c and
mci_spi.c driver.
This driver is useful when SOC doesn't have built-in MCI
component. Tested with nios, 2Go SD-CARD and FAT file system.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This function in used by the MCI over SPI driver.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The puts functions now properly return the number of characters
written. With this we can also fix fprintf.
Also, remove never reached return in fputs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds basic device tree command support. So far we can
parse a flat device tree (-p), which also stores the tree
in memory, dump it (-d) and free (-f) the internally stored tree.
The chosen node can be updated with barebox bootargs, no other
device tree manipulation is implemented yet.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
vanilla libfdt 1.3.0 from the dtc git:
git://git.jdl.com/software/dtc.git
Only small adjustments to compile with barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When building sandbox, barebox is built with -Dprintf=barebox_printf as
to not collide with the printf provided by libc. This would also match
the format(printf) function __attribute__.
Since gcc documents that __printf__ can be used instead of printf as a
format attribute, use this instead and avoid a lot of noisy warnings.
NB: this relates to 6b082cfe9f which was
an earlier attempt at solving this, which got reverted due to other
regressions.
Signed-off-by: Loïc Minier <loic.minier@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
rename it to digest_file_window
introduce digest_file to digest a file and digest_file_by_name
where we specify the algo by name
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Modified the i2c_imx driver to support data-only transfers, without
command byte. This allows to construct more complex i2c transfers
and support non genuine devices like Atmel ATxx secure memory, where the
master reads data after a write command.
Signed-off-by: Rosen Kolev <rosen.kolev@amk-drives.bg>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently it's not implemented by any driver so add a note to the
documentation.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
you can choose the initrd via @<num>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as in barebox the data could be the mapped file or a allocated memory with
just the data (non header)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>