Add the required brackets, so that we don't write unused registers
with potentially bogus values.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file originates in Linux. Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.
This commit was generated by the following commands:
find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
git mv include/sizes.h include/linux/
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some devices need a considerable amount of time
from reset deassertion until they are ready to
establish a link. Relaxing the link-up timeout
helps to detect them more reliable.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bridge filtering logic needs a minimum
alignment of 1MB for mem and 4KB for io resources.
Take this into account while assigning resources
to devices in oredr to not produce overlapping
windows between different bridges.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The previous math would return negative sizes
for some BARs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is the same fix that was applied to the Linux kernel in commit
56fab6e18944 (PCI: mvebu: Fix uninitialized variable in
mvebu_get_tgt_attr()).
Fixes: 5a9ba98 ("pci: mvebu: Add PCIe driver")
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So that PCI devices hang down from bridges and root
bridges down from the PCI host controller when
calling devinfo.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise the drivers for a device may probe before the
devices parent bridge is fully configured, which leads
to errors when accessing the BARs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some host controllers provide a prefetchable
memory area and devices will prefer this for
some of their BARs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a PCI driver for the controllers found on Marvell MVEBU SoCs.
Besides the functional driver itself, it also adds SoC specific PHY
setup required for PCIe. Currently, only Armada 370 is fully supported.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When using more than one PCI bus, we have to assign unique numbers
to each bus. Use an auto-incremented bus index and assign it to
each registered bus. Also, allow the PCI host controller to update
internal registers by calling set_busno with assigned bus number.
While at it, add pci_controller struct to set_busno callback,
add a back reference to pci_controller to pci_bus, and clean up
unused left-overs from Linux import.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Disable access to PCI devices I/O and memory regions while
mangling BAR registers.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As soon as pci_register_device is called, a potential driver
will access its registers. This requires BARs to be set up
properly, so move pci_register_device after BAR setup.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In PCI 64-bit BARs span two 32-bit BARs, therefore if BAR type
indicates a 64-bit BAR we have to skip the next BAR register.
While at it, also set proper IORESOURCE flags for I/O and
32b MEM.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also drop redundant xzalloc() result check
as xzalloc() does not return in case of memory allocation error.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>