Don't try to attach mac to device if there is no net support selected.
Fixes:
undefined reference to `dev_add_param_mac' in both iim and ocotp drivers.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
musb_barebox.c contains code that is only ever used if CONFIG_MUSB_HOST
is set. Building it uncoditionally breaks the build depending on the link
order.
Fixes:
drivers/usb/musb/musb_barebox.c:64: undefined reference to `musb_urb_enqueue'
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The comment in scripts/Makefile.build says as follows:
We would rather have a list of rules like
foo.o: $(foo-objs)
but that's not so easy, so we rather make all composite objects depend
on the set of all their parts
This commit makes it possible!
For example, assume a Makefile like this
obj-m = foo.o bar.o
foo-objs := foo1.o foo2.o
bar-objs := bar1.o bar2.o
Without this patch, foo.o depends on all of
foo1.o foo2.o bar1.o bar2.o.
It looks funny that foo.o is regenerated when bar1.c is updated.
Now we can handle the dependency of foo.o and bar.o separately.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Enable support for the i.MX6sx sabresdb and the KaRo Tx6x.
The sabresdb needs regulator support, so enable this aswell.
Also enable usbserial support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the Freescale i.MX6sx sabresdb board.
Tested are:
- UART
- The three SD card slots
- USB host
- USB otg (host and device mode)
- FEC (both)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add some cpu type defines and clock support. The clock support
is very different from other i.MX variants, so it's a separate
file, like done in the kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current algorithm assumes the MAC address starts at a 4 byte
aligned address. Unfortunately this is not always the case. On the
i.MX6sx the MAC Address for the second FEC starts at offset 0x632.
The register space for the fuse map has holes, only the 16 byte
aligned words contain data. This means we have to skip the holes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The reset default of this register has changed on i.MX6sx. Explicitly
write the value we want to have to make it work on i.MX6sx.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Pin 0x74 (gpmc_wpn.gpio0_30) is not used on the phyCORE SOM.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Blspec is a consumer of the flexible bootargs mechanism, so it should
depend on it rather than select it.
Fixes:
warning: (BLSPEC && DEFAULT_ENVIRONMENT_GENERIC_NEW) selects FLEXIBLE_BOOTARGS
which has unmet direct dependencies (COMMAND_SUPPORT && CMD_GLOBAL)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver currently only works on OpenRISC, as it uses
the cache flush/invalidate functions of this arch.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Avoids a build failure if the config does not include ULPI support.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes NAND initialization issue which appears occasionally on
some i.MX6 SoCs (particulary was observed on phyCARD-i.MX6 with
i.MX6Solo).
Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fastboot gadget needs the 'release_string' which is available only
if CONFIG_BANNER is set.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There are only a few users of BUILTIN_DTB left, but those should
alsways fill thr name properly. Avoids lots of failures in the
randconfig builds.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It doesn't make sense to allow building in a single DTB into a
multiimage barebox, so we can spare the user this option.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This got lost during bd1bf53b34
(mci: imx-esdhc: factor out common sdhci registers). Seems the PIO
option isn't too heavily used.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Both components need the OF display timings helpers.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This was only done for some of the boards and while it is ok to build
those boards without regulator support it may potentially yield non-working
barebox binaries. This is clearly not what the user wanted.
Also select the appropriate bus support needed for the MC13xxx.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes
common/firmware.c:206:2: error: implicit declaration of function 'copy_file'
in a number of configuration where this file isn't pulled in through
other headers.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
.../altera_serial.c:118:2: warning: too many arguments for format
Also sz is of type size_t, so use proper format specifier.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
.../altera_serial.c:84:6: error: void value not ignored as it ought to be
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver uses a lot of arch specific functionality and
fails to build on anything but SOCFPGA.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Old version of imx6_mmdc_add_mem did not use 64-bit arithmetic and
thus was prone to overflow on systems with 4GB of memory. It also did
not take into account the fact that i.MX6 does not support more than
3.8GB of memory and would report incorrect memory size. This commit
fixes both issues.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Setting up the MIPI unit is necessary for proper IPU support,
so set this up here. This is only needed for graphics in barebox,
the Kernel repeats this setup during booting.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for phyBOARD-SUBRA which use a phyFLEX-i.MX6 (pfla02) module.
- i.MX6 SOLO with 512MB RAM
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Lucas Stach
Sascha Hauer
Masahiro Yamada
Wadim Egorov
Dmitry Lavnikevich
Andrey Smirnov
Christian Hemp