The pcm027 is a PXA270 based Phytec phyCORE board.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add Mitac MioA701 board initial support.
The support provides basic boot and :
- a console over USB (serial gadget).
- the SD card support
- the MTD docg3 support
- the LCD support
Add a check in the default environment for a barebox.env
file on the first partition (FAT). If the file exists,
source it instead of the normal boot procedure.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add CCCR bits definition for PXA SoC, so that the bootloader
can setup a stable core clock frequency, which is not the
initial reset clock, as required by Intel's PXA27x Processor
family developer's guide, chapter 3.5.5, table 3.7 (clock
frequencies).
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add standard GPIO routings for LCD panels, taken from linux
kernel.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As pxafb can rely on a PWM to control backlight, and because
driver dependencies are hard to deal with, remove automatic
enable of PXAFB on probe.
The user should in its environment do a :
- fb0.enable=1
This way, the PWM has been probed and is ready to work, and
the pxafb backlight control works.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add PXA embedded pulse width modulator support. The PWM can
generate signals from 49.6kHz to 1.625MHz.
The driver is for pxa2xx family. The pxa3xx was not handled yet.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the platform data for MMC/SD card host on the PXA SoCs.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add mmc clock frequency reader. Easy as MMC host controller
is constant, while the clock between host and card is
settable.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt mainline kernel pxa27x_udc driver to barebox :
- remove function header comments as they are in mainline
- test it with serial gadget
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The core support was brought by Marc and Sascha.
The cache choice was fixed by Luotao Fu.
Some gpio and devices addons were provided by Robert.
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>