Although conclusions in 50d1b2de8e "ARM
v7: Fix register corruption in v7_mmu_cache_off" are correct, the
implemented fix is not complete because the following failure can
happen:
1. d-cache contains the cache line around 'sp'
2. v7_mmu_cache_off() disables cache
3. early v7_mmu_cache_flush() pushes 'lr' on uncached stack
4. v7_mmu_cache_flush() flushes d-cache and can override stack written
by step 3.
5. v7_mmu_cache_flush() pops 'lr' out of cache and jumps to it which
might be random data now.
Patch avoids step 3 which is easy because 'lr' is never modified by the
function. By using the 'r12' scratch register instead of 'r10', the
whole initial 'push' can be avoided.
Patch moves also the 'DMB' operation so that it is executed after data
has been pushed on stack.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For CCMX51-boards now we do not use ESDCTL, but actual command for
adding memory is missing. This patch fix this issue.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
See also:
commit eb84709192
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon Mar 25 15:18:38 2013 +0100
clk: remove unused __clk_[get|put]
This is some unused code resulting from copying stuff from
the kernel. Remove it.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The missing 'break' statement lets look an i.MX23 like an i.MX28.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This partly reverts:
commit 697e02b74f
Author: Alexander Shiyan <shc_work@mail.ru>
Date: Tue Jan 22 15:08:31 2013 +0400
ARM: ccmx51: Remove SDRAM size settings
This patch removes SDRAM memory size setting from board due
to auto detect last one by ESDCTL.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The board originally configured the SDRAM controller for the
maximum size and detected the usable SDRAM size by reading the
board id. This became broken after switching to automatic SDRAM
size detection by reading back ESDCTL values.
This patch brings back the old behaviour.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards setup more memory than they actually have. The real memory
size can then be detected later for example by reading a board id.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In commit ad09b59f8b "ARM i.MX31: give
register base addresses a proper MX31_ prefix", the IOMUX GPR setup
to enable USBH2 was replaced with an incorrect source register.
Instead of reading the GPR register, USBOTG HWHOST is used as rmw source,
which contains 0x10020001.
Beside the intended GPR[11] setup ("Enable USBH2 signals on AudioPort 3 and
AudioPort6"), this erroneously also sets
GPR[28] enable USBOTG loopback
GPR[17] override DSR_DCE1 with USBOTG_DATA4
GPR[0] select FIR DMA requests instead of UART2 DMA
Beside breaking UART2, it probably also broke some UART1 and USB OTG setups.
Fix this and replace the address with the appropriate defines.
Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The prefix/cleanup series
ad09b59f8ba8c63596674c53af062b
missed a few unprefixed IOMUXC_BASE define users. Fix these.
Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fix incorrect Kconfig symbols for MACH_FREESCALE_MX51_PDK,
MACH_FREESCALE_MX53_LOCO and MACH_FREESCALE_MX53_SMD.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox do not have support for MACH_NXDKN, MACH_NXHMIBB,
MACH_NXEB500HMI and MACH_NXHX boards, so remove these symbols.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OMAP_CLOCK_ALL is missing in Kconfig, so remove the "select" statement
and all other references to this symbol.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We PAGE_ALIGN the size in dma_alloc_coherent so do it also when free the memory.
Use PAGE_SIZE instead of magic numbers.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since commit:
2ccd451 ARM i.MX28: change default watchdog reset method
the external reset via the reset pin is broken. That commit overwrites the
HW_CLKCTRL_RESET register with only WDOG_POR_DISABLE set, which results in
disabling the external reset.
This patch uses read-modify-write to set the WDOG_POR_DISABLE, leaving the
WDOG_POR_DISABLE untouched.
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Due to some changes in the framework a resource size of zero does not map
anything at all and it does it silently.
Defining the resource size for the MCI interface make it work again on the
Chumby.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the iomux-v3 (found on i.MX25,35,51,53,6) to pinctrl
support. The old SoC specific API is kept for compatibility. The
pinctrl devicetree support is enabled automatically when OFDEVICE
support is available.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch includes no functional change. If a configurable DDRPLL_M
is required later, it should be set by the board instead of from here.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The *PLL_N values can be calculated from the OSC value. This patch
includes no functional change.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Linux kernel, simplified and reworked to match barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ODMdata tells us how much RAM is installed, so no need to define this at
the board level.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ODMdata tells us which UART to use for debugging purposes. This is
agreed upon in both the upstream Linux kernel and U-Boot, so do it the
same way in barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All Tegra20 boards have a common startup sequence. Also there is an
agreement on how to find out about the installed amount of RAM and other
information needed by early startup. So as there is really no need to do
any lowlevel stuff per board, we can just do it at the ARCH level.
This also enables the first stage loading of barebox by detecting the
currently running CPU and booting the main CPU cluster if neccesary.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently only implements system wide reset functionality.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Replace the ad-hoc clocksource implementation with a proper driver for
the Tegra 20 timer. This driver is able to do the required hardware
initialisation itself.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only a basic set of clocks is supported. This is a temporary solution
and will go away as soon as the port of the Tegra common clock code from
the Linux kernel is ready to go.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We will follow the Linux kernel and go devicetree only for Tegra. This
doesn't prevent specific code for certain boards, but always requires a
valid DTB for all boards.
Also regenerate the AC100 defconfig to reflect this change.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All available opensource tools and published BCT configurations use
0x10800 as the default textbase on Tegra 20.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Enrico Scholz
Alexander Shiyan
Antony Pavlov
Juergen Beisert
Sascha Hauer
Alexandre Belloni
Andreas Pretzsch
Jan Weitzel
Marc Kleine-Budde
Jan Luebbe
Jean-Christophe PLAGNIOL-VILLARD
Lucas Stach