We already have a possibility to register a MAC address provider
based on a ethernet device id. This adds a similar functionality
for devices probed from devicetree. Code can register itself to
be a MAC address provider for a certain devicetree node.
This helps on i.MX to let the IIM unit provide a MAC address for
the FEC.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When the dhcp code discovered the tftp-server-name option it immediately
tries to resolve the name. This can't succeed since the we are somewhere
in the dhcp processing and the nameserver may not even be known.
Fix this by resolving the name when dhcp is completed. While at it, do
this in a way that net_set_serverip is only called when resolv() returns
something useful. Otherwise we may end up overwriting a previously
configured serverip which came from the bootp bp_siaddr field.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rather than storing the parameters globally and trying to keep them
in sync with the device parameters, store the parameters in the ethernet
device directly. Also, update to dev_add_param_ip().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to have no console support
Use full for bootstrap as we can save 6.5 KiB (barebox.bin) and
3.8 KiB (zbarebox.bin lzo) on at91sam9263 as example vs console simple
As on bootstrap we have often very limited size.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When starting a network device wait until the link is up. Otherwise
autobooting does not work with little timeout and several attempts
have to be made until the network is finally up.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dev_add_child is a very unsafe function. If called multiple times
it allows setting the same device to different parents thus corrupting
the siblings list. This happens regularly since:
| commit c2e568d19c
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| Date: Sat Nov 3 16:11:05 2012 +0100
|
| bus: add bus device
|
| automatically add it as parent of any bus device if none already specified
|
| we have now a nice output per bus
If for example a FATfs is mounted this nice output per bus often ends with:
> `---- fat0
> `---- 0
> `---- 0x86f0000087020031-0x86f000410df27124: /dev/<NULL>
> `---- sram00
> `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
> `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
> unable to handle NULL pointer dereference at address 0x0000000c
> pc : [<87f08a20>] lr : [<87f08a04>]
> sp : 86eff8c0 ip : 87f3fbde fp : ffffffff
> r10: ffffffff r9 : 00000000 r8 : 00000003
> r7 : 86f075b8 r6 : 00000002 r5 : ffffffec r4 : 86f07544
> r3 : 00000000 r2 : 43f900b4 r1 : 00000020 r0 : 00000005
> Flags: Nzcv IRQs off FIQs off Mode SVC_32
> [<87f08a20>] (do_devinfo_subtree+0x90/0x130) from [<87f08a90>] (do_devinfo_subtree+0x100/0x130)
>
> [<87f3e070>] (unwind_backtrace+0x0/0x90) from [<87f28514>] (panic+0x28/0x3c)
> [<87f28514>] (panic+0x28/0x3c) from [<87f3e4b8>] (do_exception+0x10/0x14)
> [<87f3e4b8>] (do_exception+0x10/0x14) from [<87f3e544>] (do_data_abort+0x2c/0x38)
> [<87f3e544>] (do_data_abort+0x2c/0x38) from [<87f3e268>] (data_abort+0x48/0x60)
This patch fixes this by adding a device to its parents children list in
register_device so that dev_add_child is no longer needed. This function
is removed from the tree. Now callers of register_device have to clearly
set the parent *before* registering a device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Jan Lübbe <jlu@pengutronix.de>
We call phy_update_status only once in 5 seconds. This makes
sure we do not have great overhead when using ethernet devices.
However, if phylib tells us the link is down anyway, there won't
be ethernet transfers, so it doesn't hurt to call phy_update_status
in this case. This makes sure we can use the ethernet device when
the link comes up and do not have an additional 5 second penalty
in this case.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as we do not need to probe them and they have no driver or bus attached
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
edev->init is called at eth_register time unconditionally and is supposed
to initialize the ethernet hardware. Since it's called unconditionally
this could be done by the driver without having an additional hook.
Some drivers need their initialization done earlier since they also register
a mdiobus which does hardware accesses on registration time.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
via -r opt, global.dhcp.retries or dhcp_retries
set the priority order;
This will allow to do not stay infinite loop if no dhcp available
for boot sequence as example
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This will allow to only update a var if recive a valid data.
This is need for hostname.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This way you can specify as previously set the dhcp parameter via global.dhcp.xxx
and get the result via global.dhcp.xxx
This is need for the defaultenv-2 to add the bootp suppport.
Use it on defaultenv too to have only one set of var.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The old tftp suppoer has been replaced with filesystem based tftp
support, so remove the old code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt phylib from linux
switch all the driver to it
reimplement mii bus
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or not up fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, the timeout when waiting for packages is smaller than the
timeout communicated to the TFTP server for retransmitting. Make sure we
wait at least for two retransmissions before giving up.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reduce confusion by making clear six bytes are passed,
not a string.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
resolv() uses getenv_ip() which in turn calls resolv(). Fix
this inifinite loop by not using getenv_ip directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The following patch serie improve the complete support
by adding a complete framework to aalow commands complete support.
The add also car complete support for eval and setting and executable
file support
This also include an update of the stringlist API to support asprintf
API
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=rYfw
-----END PGP SIGNATURE-----
Merge tag 'complete_update_support' of git://git.jcrosoft.org/barebox into next
improve complete support
The following patch serie improve the complete support
by adding a complete framework to allow commands complete support.
The add also car complete support for eval and setting and executable
file support
This also include an update of the stringlist API to support asprintf
API
The dhcp command starts with an unitialized start time. The start
time is often long in the past which results in an immediate timeout
and resend of the dhcp packet. Fix this by initializing the start time
correctly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Was missing in net_init and net_new.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
'nameserver' and 'domainname' should be globally available variables
specific to networking. Register a 'net' device to store these variables.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Jean-Christophe PLAGNIOL-VILLARD
Alexander Shiyan
Antony Pavlov
Wolfram Sang
Johannes Stezenbach