The NT disk Signature is a unique 32-bit value in the MBR allowing
to identify a MSDOS partitioned disk. The signature can be used to
specify the Linux rootfs.
This patch adds support for the NT disk Signature in the form of a
device parameter which can both be read and written.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds macros for ns16550 port initialisation
and single char output. The macros can be used in
MIPS asm pbl code.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Ingenic JZ4755 SoC (JZ4750D family) has three UARTs.
So we can give to the user choose which one of them
to use for low level debug (debug_ll) output.
Also this commit adapts the only JZ4755 board
(Ritmix RZX50) for using the new debug_ll port
selection.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I'm not sure but I guess we don't need defined(__I386__) check.
I kept it for now.
Signed-off-by: Masaki Muranaka <monaka@monami-ya.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In case he configures with make ARCH=x85 menuconfig,
config SPI will be set to "y". And he will got an error on spi.h.
Signed-off-by: Masaki Muranaka <monaka@monami-ya.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's a precious information that barebox will boot the kernel
with the internal devicetree, so print it even in non verbose
mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We often encounter the situation where slow devices should not be
probed during startup since probing is slow and maybe unnecessary
for unused devices. With MMC we have the 'probe' device parameter,
for ata we have the same, for USB we have the 'usb' command. Overall
this is not very consistent.
With MMC there is the additional problem that the probe parameter
is attached to the logical device when we often have the information
which physical device we want to probe.
This patch adds a 'detect' callback for devices and adds a command
to detect devices and to list the devices which are actually detecable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers use blk->ops->read/write. This bypasses the caching block
layer and was never intended like this. The upper API to the block layer
is the cdev layer. This patch adds block_read and block_write functions
and uses them where appropriate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
block_read and block_write collide with a to-be-introduced
global function, so rename the file operation functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
After Reset VMMC goes to default VSEL. This is not a clean power cycle for
some SD cards.
Set flag WR_S for VMMC to avoid going to default VSEL.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver should work with some Atheros WiSoCs:
- ar2312, ar2313
- ar2315, ar2316 ...
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The I/O accessors in_bexx, out_bexx, in_lexx and out_lexx are updated
to the latest Linux version.
The patch is tested on a MPC8544 based board and solved I/O access
issues on I2C devices.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To prepare for an update of the I/O functions to the latest Linux
version, the indentation is fixed.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In barebox we have no CONFIG_MIPS_MT_SMTC Kconfig option.
So remove the code under this macro.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>