This adds a command to flip bits in a Nand flash. This is useful for
testing purposes to check if flipped bits are corrected and if the
driver returns the correct number of bitflips.
The command writes a configurable number of bitflips to a single Nand
page. If the -r option is not given the results are reproducible, so
calling the same command twice will revert the bitflips.
The command uses the raw read/write Nand operations which are probably
less tested than the regular read/write operations, so the command may
produce surprising results.
As of writing the command has been tested with the GPMI Nand driver and
the imx-nand driver with fixes posted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The only user of libmtd was ubiformat which now uses the mtd-peb API,
so remove the now unused libmtd.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This changes ubiformat from the libmtd API to the mtd-peb API. This
makes the libmtd API unnecessary and it can be removed in the next
step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Code which properly wants to handle Nand flash has to work
in a block based way since blocks are the entities that are erased or
may become bad. The regular mtd API works based on offsets in the device
which introduces unhandy 64bit arithmetics and the requirement to align
buffers to blocks.
This introduces the mtd peb API (PEB for physical Erase Block) which
allows the users to work in a block oriented way. The API is heavily
inspired by the UBI IO layer and in fact can replace parts thereof
later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will automatically call barebox_update for the transfered file if
it is an ARM Barebox image and the destination file is defined by some
update handler.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mtd_[read|write|erase] are input functions to the mtd subsystem, so
check for valid input data here rather than relying on the drivers doing
this. The checks are copied from the Kernel as of 4.5-rc5
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added a function to register a fixup to enable or disable
device tree nodes.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Passing phy configuration to the ep93xx_eth driver was not supported yet
and will be added with this patch. When no pdata is passed, the probably
broken default of phy_addr = 0 will be used to maintain compatibility
with the previous implementation.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dev_request_mem_region returns a void * which shall be checked with
IS_ERR(), but in some cases the valid pointer returned clashes with
error values. This is especially the case on some Atmel SoCs.
This introduces dev_request_mem_resource which returns a struct resource
instead which in any case can be checked with IS_ERR(). It's the drivers
responsibility then to get the IOMEM pointer from the resource.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a function to check for the existence of an update handler
based on the supplied bbu_data.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a device >4GiB is erased, not only the offset can be bigger
than 4GiB, but also the size. This happens with the simplest command
to erase a device: erase /dev/nand0. Make the size argument a 64bit
type to make this work.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make the userspace structs 64bit where necessary. Since we do not have
separated kernel/userspace in barebox we can just modifiy the original
structs instead of adding separate 64bit structs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds initial regmap support. Function prototypes are from
the Kernel, the implemention is mostly rewritten. Currently the
regmap support is limited to the bare minimum to get started.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The HABv4 functions need access a part of the ROM which is
located in the zero page. This must be done early, before the
MMU has been configured and the zero page has been set to faulting.
The HAB functions currently use cpu_is_imxxy(). At the stage where
HAB is called the i.MX CPU type variable is not yet initialized,
so this code only works when only one i.MX type is enabled and
cpu_is_imxxy() are compile time constants.
To fix HAB support when more than one i.MX type is enabled make the
HAB status function SoC specific so that we can drop the use of
cpu_is_imxxy().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit changes the behaviour of the 'miitool'. Now in order to show
PHY's link information 'miitool' should be invoked as such:
miitool -s [PHY]
Also, implment code to allow to register a dummy PHY device in order to
be able to perform raw MDIO bus access.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on the original patch for linux:
commit 00b4d9a14125f1e51874def2b9de6092e007412d
Author: Maxime COQUELIN <maxime.coquelin@st.com>
Date: Thu Nov 6 10:54:19 2014
On some 32 bits architectures, including x86, GENMASK(31, 0) returns 0
instead of the expected ~0UL.
This is the same on some 64 bits architectures with GENMASK_ULL(63, 0).
This is due to an overflow in the shift operand, 1 << 32 for GENMASK,
1 << 64 for GENMASK_ULL.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Add mdiobus_get_bus() -- a function to get a MDIO bus by its number
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Port bitbanged MDIO framework and gpiolib MDIO bus driver that uses it
from Linux kernel.
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move semaphore related definitions to its original place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move Linux wait queue related definitions to its original place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move mutex related defines to its original place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There's not only HABv4 but also HABv3. No need to put the corresponding
code in separate directories, so rename the habv4 directory to hab.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move spinlock related definitions to its original place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move cond_resched() from barebox-wrapper.h to its original
place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
