This patch adds the crc32 command to be build
as host and optionally as target tool.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CONFIG_MAXARGS is only used with the simple console support, so add
a 'depends on'. While at it, move it below the shell selection.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A function should either return an ERR_PTR or NULL on failure, but not both.
Let get_phy_device() return an ERR_PTR and fix the return checks in mdiobus_scan
and phy_device_connect.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Image payload size should always be a multiple of 4 bytes. This fixes
mis-sized image payload by allocating payload buffer as multiple of 4
but load true filesize into the payload buffer.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Xmodem blocks should start with SOH but kwboot never sets the first
block byte. This fixes kwboot's Xmodem block initialization and sets
first block byte to SOH.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current implementation of the bootloader specification depends on the
hardware name and the name of the device in /dev to match. As the default
hardware name is mciX and the device name is diskY the bootloader spec
cannot be used as is.
This patch implements a way to overwrite the device name similar to what is
possible for the imx-esdhc driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%i" in format string requires a signed integer.
"%d" in format string requires a signed integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%u" in format string requires a unsigned integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%d" in format string requires a signed integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%d" in format string requires a signed integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%d" in format string requires a signed integer.
"%u" in format string requires a unsigned integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format.
No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%d" in format string requires a signed integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
asm/hardware.h does not have any content except including mach/hardware.h.
include mach/hardware.h directly where needed and get rid of asm/hardware.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
DOS MBRs might contain an extended partition that holds several logical
partitions. Add these to the partitions of the block device.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The code used to ineffectively take the end of the last partition as guess
for the disk size. Better use the end of the partition that has its end
rearmost.
Also return an unsigned type instead of int as the result is always
non-negative.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fix a compiler warning while building sandbox barebox with
gcc version 4.8.2.
common/dlmalloc.c: In function ‘barebox_calloc’:
common/dlmalloc.c:1756:2: warning: ISO C90 forbids mixed declarations
and code [-Wdeclaration-after-statement]
void *mem = malloc(sz);
^
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the Kconfig and Makefile directives to build barebox
for the GEIP DA923RC board.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The use of the DDR driver as well as early I2C support is
enabled for board initialising their memory through SPD EEPROM
data.
A SOC specific function returning the DDR bus frequency
is added for the DDR driver to translate DDR timings to
register values.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Because the port count is different between the MPC8544 and
existing CPU support, the Ethernet port count is defined on
a per CPU basis.
Accordingly, the TBI PHY initialisation code is updated.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Definitions are added to support the mpc8544 sOC.
The function returning the I2C bus frequency is updated
to take into account the mpc8544 specific clock ratio.
A mininal GPIO API is added to enable and set the GPIO
out pins.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support to configure the active framebuffer for the kernel through
device tree.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If drivers want to fixup their specific instance they need some context
to know which instance they have to fixup.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use the mailbox driver to set up a framebuffer based on the firmware
configuration.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the missing "right" field to struct bcm2835_mbox_tag_overscan.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for framebuffers with noncontiguous horizontal lines.
Video drivers can set this value if the hardware requires it.
In case a driver does not set it, the current value of
xres * (bpp / 8) is used instead.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>