This is the Microchip version of the Atmel 24c1024, which is already
supported. The key difference between them is that the I2C address
bit used to select between the two banks is bit 2 for the 1025 and not
bit 0 as in the 1024.
Add a flag to describe this difference.
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is based on the code introduced to the kernel in
5f9296ba21b3c395e53dd84e7ff9578f97f24295.
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch imports i2c_smbus_{read,write}* functions from linux-3.15.
Here is a quote from linux.git/Documentation/i2c/smbus-protocol:
If you write a driver for some I2C device, please try to use the SMBus
commands if at all possible (if the device uses only that subset of the
I2C protocol). This makes it possible to use the device driver on both
SMBus adapters and I2C adapters (the SMBus command set is automatically
translated to I2C on I2C adapters, but plain I2C commands can not be
handled at all on most pure SMBus adapters).
So having i2c_smbus_{read,write}* functions in barebox makes
porting of linux i2c client drivers much easier as many drivers rely on
these smbus functions.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver didn't work well with at24 driver. NACKS are lost.
Errors are lost in isr due to the local variable err. Also we didn't wait for
bus free in omap_i2c_xfer_msg.
Fix issues and get other improvements from linux kernel
Tested on OMAP4 and AM335x
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds several missing includes to files under include/ which
we relied on being included implicitly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver to get read/write support to most I2C EEPROMs,
after you configure the driver to know about each EEPROM on
your target board. Use these generic chip names, instead of
vendor-specific ones like at24c64 or 24lc02:
24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
Unless you like data loss puzzles, always be sure that any chip
you configure as a 24c32 (32 kbit) or larger is NOT really a
24c16 (16 kbit) or smaller, and vice versa. Marking the chip
as read-only won't help recover from this. Also, if your chip
has any software write-protect mechanism you may want to review the
code to make sure this driver won't turn it on by accident.
Based on linux 3.6
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This returns an I2C client bound to the "dummy" driver, intended for use
with devices that consume multiple addresses. Examples of such chips
include various EEPROMS (like 24c04 and 24c08 models).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed for i2c-gpio support
Based on linux 3.7-rc2
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can show the this of i2c busses
set the bus device as parent of all devices.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a I2C bus on which the I2C devices and drivers register.
This makes it cleaner as I2C devices won't accidently end up probed by
a platform_device driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Modified the i2c_imx driver to support data-only transfers, without
command byte. This allows to construct more complex i2c transfers
and support non genuine devices like Atmel ATxx secure memory, where the
master reads data after a write command.
Signed-off-by: Rosen Kolev <rosen.kolev@amk-drives.bg>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These values dervied from Freescale source code for the mc9s08dz60
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Export mc13892_reg_read, mc13892_reg_write and mc13892_set_bits
function instead of exposing the i2c interface.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Export mc9sdz60_reg_read, mc9sdz60_reg_write and mc9sdz60_set_bits
function instead of exposing the i2c interface.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>